Go Back  Quiltingboard Forums >
  • Main
  • steel wool as a needle sharpener >
  • steel wool as a needle sharpener

  • steel wool as a needle sharpener

    Thread Tools
     
    Old 05-09-2011, 06:33 AM
      #11  
    Super Member
     
    bluteddi's Avatar
     
    Join Date: Sep 2010
    Location: MN
    Posts: 2,411
    Default

    I guess I misunderstood the "steek wool.needle sharpener" idea..I thought u just held the bag in your hand ran your needle thru it, as if sewing but with out thread..... I never would have thought to put it under the presser foot of my machine and run the needle thru that way....
    bluteddi is offline  
    Old 05-09-2011, 06:57 AM
      #12  
    Banned
    Thread Starter
     
    Join Date: Dec 2009
    Location: Enid, OK
    Posts: 8,273
    Default

    Originally Posted by rdorminy
    I've used the spray can top/steel wool pin cushion for years. I had a Brownie Troop and we made them for Mothers day, smile. What goes round comes round. Best pin/needle cushion in my collection.
    yep, I made my first one for my mom in GS when I was 10! She still has it...only changes the SOS pad once a year on Mother's day! she also replaced the denim top with silk..makes the pins slide in and out easier she says.heheheh
    jaciqltznok is offline  
    Old 05-09-2011, 07:16 AM
      #13  
    Super Member
     
    Join Date: Sep 2010
    Location: Corpus Christi, Texas (that's me!)
    Posts: 3,771
    Default

    What about "sewing through" fine sandpaper without the machine threaded. Will this damage the bobbin casing area?

    I've used this technique before, not on a daily basis, but used it at least once a year.

    That's another quick trick for an emergency back up that I use if I'm out of sewing machine needles for that day.
    cctx. is offline  
    Old 05-09-2011, 07:17 AM
      #14  
    Banned
    Thread Starter
     
    Join Date: Dec 2009
    Location: Enid, OK
    Posts: 8,273
    Default

    Originally Posted by cctx.
    What about "sewing through" fine sandpaper without the machine threaded. Will this damage the bobbin casing area?

    I've used this technique before, not on a daily basis, but used it at least once a year.

    That's another quick trick for an emergency back up that I use if I'm out of sewing machine needles for that day.
    if that sand gets into the bobbin race it can cause it to freeze up...
    jaciqltznok is offline  
    Old 05-09-2011, 07:41 AM
      #15  
    Super Member
     
    Join Date: Jul 2010
    Posts: 1,789
    Default

    Originally Posted by cctx.
    What about "sewing through" fine sandpaper without the machine threaded. Will this damage the bobbin casing area?

    I've used this technique before, not on a daily basis, but used it at least once a year.

    That's another quick trick for an emergency back up that I use if I'm out of sewing machine needles for that day.
    I've seen this hint many times over the years. As long as you clean the bobbin area afterward you should be fine.
    bakermom is offline  
    Old 05-09-2011, 07:46 AM
      #16  
    Super Member
     
    Join Date: Sep 2010
    Location: Corpus Christi, Texas (that's me!)
    Posts: 3,771
    Default

    Originally Posted by bakermom
    Originally Posted by cctx.
    What about "sewing through" fine sandpaper without the machine threaded. Will this damage the bobbin casing area?

    I've used this technique before, not on a daily basis, but used it at least once a year.

    That's another quick trick for an emergency back up that I use if I'm out of sewing machine needles for that day.
    I've seen this hint many times over the years. As long as you clean the bobbin area afterward you should be fine.
    You're right, and keeping it oiled as needed.
    I'd rather use the sandpaper, not sure on that steel wool.
    cctx. is offline  
    Old 05-09-2011, 07:50 AM
      #17  
    Banned
    Thread Starter
     
    Join Date: Dec 2009
    Location: Enid, OK
    Posts: 8,273
    Default

    instead of sandpaper, at the hardware store look for EMERY cloth...it is in the same dept and you can buy by the sheet!
    it is black and contains the same emery powder that used to fill the strawberry needle emerys! I would also put a piece of cloth over and under it just in case!
    jaciqltznok is offline  
    Old 05-09-2011, 08:10 AM
      #18  
    Super Member
     
    Join Date: Sep 2010
    Location: Corpus Christi, Texas (that's me!)
    Posts: 3,771
    Default

    Originally Posted by jaciqltznok
    instead of sandpaper, at the hardware store look for EMERY cloth...it is in the same dept and you can buy by the sheet!
    it is black and contains the same emery powder that used to fill the strawberry needle emerys! I would also put a piece of cloth over and under it just in case!
    Thanks for the tips Jacqui!
    cctx. is offline  
    Old 05-09-2011, 08:44 AM
      #19  
    Power Poster
     
    Join Date: Apr 2011
    Location: Ontario, Canada
    Posts: 17,827
    Default

    Or you could fancy it up ... and do the tea cup and saucer pin cushions!
    QuiltE is offline  
    Old 05-09-2011, 08:50 AM
      #20  
    Super Member
     
    Join Date: Jul 2010
    Posts: 1,789
    Default

    Those are cute! i made some for gifts a few years ago. I hunted aound goodwill till i found pretty matching ones.
    bakermom is offline  
    Related Topics
    Thread
    Thread Starter
    Forum
    Replies
    Last Post
    sfguimaraes
    Tutorials
    159
    11-10-2013 03:08 PM
    JenniePenny
    Links and Resources
    9
    12-20-2012 07:58 PM
    GrannieAnnie
    Main
    7
    08-14-2012 10:05 AM
    mim
    Main
    18
    09-26-2011 08:25 AM
    Joeysnana
    Main
    8
    06-16-2011 08:00 AM

    Posting Rules
    You may not post new threads
    You may not post replies
    You may not post attachments
    You may not edit your posts

    BB code is On
    Smilies are On
    [IMG] code is On
    HTML code is On
    Trackbacks are Off
    Pingbacks are Off
    Refbacks are Off



    FREE Quilting Newsletter