Go Back  Quiltingboard Forums >
  • Main
  • Using a double needle in quilting >
  • Using a double needle in quilting

  • Using a double needle in quilting

    Thread Tools
     
    Old 09-14-2013, 03:18 PM
      #1  
    Power Poster
    Thread Starter
     
    Join Date: Nov 2009
    Location: Mableton, GA
    Posts: 11,319
    Default Using a double needle in quilting

    I was watching It's Sew Easy and she was using a double needle for hemming napkins, and it occurred to me to ask if y'all have ever used one in quilting or if it is a good idea? I was thinking to use it to have equal stitching on each side of a "ditch", in particular.

    Does this sound possible? Like a good or bad idea? I guess I could try it, but, sewing machines not set up for it right now.
    Stitchnripper is offline  
    Old 09-14-2013, 03:52 PM
      #2  
    Super Member
     
    mom-6's Avatar
     
    Join Date: Feb 2010
    Location: Texas
    Posts: 6,395
    Default

    My question regards how close together/far apart your needles are. The ones I had for my machine were only about 1/8" or maybe even 1/16" apart. To my thinking that would be too close together. If yours are farther apart I think it could effective.
    mom-6 is offline  
    Old 09-14-2013, 03:58 PM
      #3  
    Junior Member
     
    JudyMN's Avatar
     
    Join Date: Aug 2010
    Location: Roseville, Minnesota
    Posts: 294
    Default

    The back side of my double needle shows a zig zag. If you like the look, go for it.
    JudyMN is offline  
    Old 09-14-2013, 04:13 PM
      #4  
    Power Poster
     
    BellaBoo's Avatar
     
    Join Date: Jan 2009
    Location: Front row
    Posts: 14,646
    Default

    I use double needles but don't thread one of them for stitching in the ditch and also for straight even top stitching. I learned this trick at a quilt seminar.
    BellaBoo is offline  
    Old 09-14-2013, 04:20 PM
      #5  
    Power Poster
     
    QuiltnNan's Avatar
     
    Join Date: Mar 2011
    Location: western NY formerly MN, FL, NC, SC
    Posts: 51,430
    Default

    Originally Posted by BellaBoo
    I use double needles but don't thread one of them for stitching in the ditch and also for straight even top stitching. I learned this trick at a quilt seminar.
    very interesting concept
    QuiltnNan is offline  
    Old 09-14-2013, 04:20 PM
      #6  
    Power Poster
     
    Join Date: Mar 2011
    Location: Ontario, Canada
    Posts: 41,538
    Default

    Tried it, didn't care for the look on the back. It looks like 2 rows of stitching on the front but 1 bobbin thread is used on the back to form the stitch.
    Tartan is offline  
    Old 09-14-2013, 05:27 PM
      #7  
    Super Member
     
    DogHouseMom's Avatar
     
    Join Date: Jan 2011
    Location: Knot Merrill, Southern Indiana
    Posts: 5,781
    Default

    Originally Posted by JudyMN
    The back side of my double needle shows a zig zag. If you like the look, go for it.

    Exactly. I did it with a minky back so the zig zag wasn't quite as noticeable. I wanted double stitching on the front on both sides of the seam line because it was flannel and I wanted the seams 'stablized' with quilting. Here's a picture of the front and the back.

    I will say one thing that I liked about it ... if you make a mistake, it's dead easy to rip the stitches out from the back. Just put your ripper in the middle of those zig zags and let er fly!
    Attached Thumbnails 4-bunny-butterfly-resized.jpg   3-quilt-label-rezised.jpg  
    DogHouseMom is offline  
    Old 09-14-2013, 05:34 PM
      #8  
    Super Member
     
    Join Date: Nov 2010
    Location: Mabank, Texas
    Posts: 8,780
    Default

    Thanks for asking your question. I have wondered what might happen if I used a double needle in quilting and now, thanks to DogHouseMom I know.
    BETTY62 is offline  
    Old 09-14-2013, 05:39 PM
      #9  
    Super Member
     
    LivelyLady's Avatar
     
    Join Date: Dec 2010
    Location: Western MA
    Posts: 2,720
    Default

    Originally Posted by BellaBoo
    I use double needles but don't thread one of them for stitching in the ditch and also for straight even top stitching. I learned this trick at a quilt seminar.
    Same here. I use the 1/4" twin needle and sew with the unthreaded one in the ditch so I get a 1/4" outline stitch.
    LivelyLady is offline  
    Old 09-14-2013, 06:02 PM
      #10  
    Super Member
     
    snipforfun's Avatar
     
    Join Date: Jul 2010
    Posts: 1,877
    Default

    I saw a blue and white quilt John Flynn did. He said he used the closest twin needle sold. He put blue thread in 1needle and white in the other then did diagonol lines. Looked really neat. the white thread showed on the blue fabric and blue only showed on the white. Normally the backside doesnt look good with a double needle but with the tight one it looks just fine. Wont look too good on curved stitching
    snipforfun is offline  
    Related Topics
    Thread
    Thread Starter
    Forum
    Replies
    Last Post
    MaggieBB
    Main
    7
    08-29-2017 05:55 AM
    dd
    Main
    27
    02-15-2016 11:16 AM
    Prissnboot
    Main
    23
    08-03-2014 12:05 PM
    annies-best
    Main
    9
    02-22-2012 06:48 AM
    dmarina
    Main
    9
    01-10-2012 04:17 AM

    Posting Rules
    You may not post new threads
    You may not post replies
    You may not post attachments
    You may not edit your posts

    BB code is On
    Smilies are On
    [IMG] code is On
    HTML code is On
    Trackbacks are Off
    Pingbacks are Off
    Refbacks are Off



    FREE Quilting Newsletter