Boom 22, 3 month group - Later
#471
Super Member
Join Date: Apr 2018
Location: Philomath, Oregon
Posts: 2,076
Terri, I’m using a gobig and am just getting ready to try a new block. I’m still doing a tester block first though as I’m pretty new with it still. So you’ve had good luck with coming out to 12 1/2 with the gobig?
#472
Vikki,
I have the Accuquilt Go Big. It was a surprise to find some of their tips in the instructions. They do work.
One is to feed the fabric through so the lengthwise grain is in the same direction as it goes through the rollers. That's because the lengthwise grain (parallel to he selvedges) stretches less than the cross grain (perpendicular to the selvages). The trip though he rollers puts enough pressure on the fabric to stretch it a bit.
Another trick I've found to improve stability is to line up the lengthwise grain with the metal cutting edges, not the die frame. The closer a cut edge is to the straight grain line, the less problems you'll have with the edges stretching.
I also stitch with the scant 1/4-inch seam the other ladies have described.
None of this is hard, but it takes a while to make it a habit. Good luck!
I have the Accuquilt Go Big. It was a surprise to find some of their tips in the instructions. They do work.
One is to feed the fabric through so the lengthwise grain is in the same direction as it goes through the rollers. That's because the lengthwise grain (parallel to he selvedges) stretches less than the cross grain (perpendicular to the selvages). The trip though he rollers puts enough pressure on the fabric to stretch it a bit.
Another trick I've found to improve stability is to line up the lengthwise grain with the metal cutting edges, not the die frame. The closer a cut edge is to the straight grain line, the less problems you'll have with the edges stretching.
I also stitch with the scant 1/4-inch seam the other ladies have described.
None of this is hard, but it takes a while to make it a habit. Good luck!
#473
Super Member
Join Date: Jul 2013
Posts: 1,684
I had to move my needle from 3.5 to 4.2 to get a scant quarter inch. I watched a craftsy tutorial about precision piecing. They suggested to cut 1/2 inch strips very carefully. Sew them together with a 1/4 inch seam Then your finished strip should measure 1/2". This allowed me to make the adjustment after a few tries. I thought this was a lot of adjustment but it's what my machine needs. Now I have to remember to adjust that setting when I turn the machine on. I wrote in black marker on my machine to remind myself!
#474
Super Member
Join Date: Nov 2017
Location: Portland, OR
Posts: 2,245
Amazing block Kass. AS someone who loves math, I love seeing what you come up with.
Darcy after I put the quilt together I realized I had those peas the wrong way. I decided to keep them that way. The Amish always make sure there is one mistake in their quilts. Something about only God being perfect. I decided that was my Amish mistake. The hundreds of other mistakes in the quilt were for the galloping horse method of quilting I use: It'll never be noticed on a galloping horse and that's the only kind I ride.
Darcy after I put the quilt together I realized I had those peas the wrong way. I decided to keep them that way. The Amish always make sure there is one mistake in their quilts. Something about only God being perfect. I decided that was my Amish mistake. The hundreds of other mistakes in the quilt were for the galloping horse method of quilting I use: It'll never be noticed on a galloping horse and that's the only kind I ride.
#475
lurking again. All the blocks are gorgeous as always !!
vikkim for what it's worth, I too in my first boom had trouble with the size of my blocks and 1/4 inch seam. Janice and everyone were so helpful, I ultimately resulted in buying a 1/4 inch seam foot for my machine. Did the trick for me.
vikkim for what it's worth, I too in my first boom had trouble with the size of my blocks and 1/4 inch seam. Janice and everyone were so helpful, I ultimately resulted in buying a 1/4 inch seam foot for my machine. Did the trick for me.
#476
Super Member
Join Date: Feb 2011
Location: Mn
Posts: 6,685
Love your blocks TG, especially the star.
I got two more done today, and then went through stash. I only need the brown. Amazing how many orange, green and purples we have this round. But my neutral and browns are low. Oh well, we all know what that means.
I love making this star - especially with Christmas red and white. I just love how it came out.
PamelaO - My Grandson loves anything camouflage, and I had dark and lighter blue camouflage and tried my hand at this pattern. Hope it will work
I love making this star - especially with Christmas red and white. I just love how it came out.
PamelaO - My Grandson loves anything camouflage, and I had dark and lighter blue camouflage and tried my hand at this pattern. Hope it will work
#477
Junior Member
Join Date: Dec 2018
Location: Albany, Oregon
Posts: 172
Thanks Mjp,
I was finally able to find out how to move my needle settings. I'm still fussing with it but think I'm on the right path. I've really appreciated all of the suggestions and ideas!!
Vikki
I was finally able to find out how to move my needle settings. I'm still fussing with it but think I'm on the right path. I've really appreciated all of the suggestions and ideas!!
Vikki
I had to move my needle from 3.5 to 4.2 to get a scant quarter inch. I watched a craftsy tutorial about precision piecing. They suggested to cut 1/2 inch strips very carefully. Sew them together with a 1/4 inch seam Then your finished strip should measure 1/2". This allowed me to make the adjustment after a few tries. I thought this was a lot of adjustment but it's what my machine needs. Now I have to remember to adjust that setting when I turn the machine on. I wrote in black marker on my machine to remind myself!
#478
Junior Member
Join Date: Dec 2018
Location: Albany, Oregon
Posts: 172
Thanks Marietta! Nice to know I'm not the only one
Vikki
Vikki
lurking again. All the blocks are gorgeous as always !!
vikkim for what it's worth, I too in my first boom had trouble with the size of my blocks and 1/4 inch seam. Janice and everyone were so helpful, I ultimately resulted in buying a 1/4 inch seam foot for my machine. Did the trick for me.
vikkim for what it's worth, I too in my first boom had trouble with the size of my blocks and 1/4 inch seam. Janice and everyone were so helpful, I ultimately resulted in buying a 1/4 inch seam foot for my machine. Did the trick for me.
#479
Junior Member
Join Date: Dec 2018
Location: Albany, Oregon
Posts: 172
Thanks Annie! I appreciate all the support. Well then, PamO got a couple of texts and calls too! Like you said, I will get the habits down and it will all become easier.
Vikki
Vikki
Vikki,
I have the Accuquilt Go Big. It was a surprise to find some of their tips in the instructions. They do work.
One is to feed the fabric through so the lengthwise grain is in the same direction as it goes through the rollers. That's because the lengthwise grain (parallel to he selvedges) stretches less than the cross grain (perpendicular to the selvages). The trip though he rollers puts enough pressure on the fabric to stretch it a bit.
Another trick I've found to improve stability is to line up the lengthwise grain with the metal cutting edges, not the die frame. The closer a cut edge is to the straight grain line, the less problems you'll have with the edges stretching.
I also stitch with the scant 1/4-inch seam the other ladies have described.
None of this is hard, but it takes a while to make it a habit. Good luck!
I have the Accuquilt Go Big. It was a surprise to find some of their tips in the instructions. They do work.
One is to feed the fabric through so the lengthwise grain is in the same direction as it goes through the rollers. That's because the lengthwise grain (parallel to he selvedges) stretches less than the cross grain (perpendicular to the selvages). The trip though he rollers puts enough pressure on the fabric to stretch it a bit.
Another trick I've found to improve stability is to line up the lengthwise grain with the metal cutting edges, not the die frame. The closer a cut edge is to the straight grain line, the less problems you'll have with the edges stretching.
I also stitch with the scant 1/4-inch seam the other ladies have described.
None of this is hard, but it takes a while to make it a habit. Good luck!
#480
Ask and ye shall receive. When I was a child one of my favorite things about grocery shopping was to look for fancy produce stickers, when I would find one my Gma would buy that produce so I could have a fancy sticker for the collection (on the refrigerator), so your limes needed a fancy produce sticker.
[ATTACH=CONFIG]608697[/ATTACH]
I wasn't sure about the huge difference in color from the very light to the very dark in the limes, I think they are a bit distracting in this block.
I wasn't sure about the huge difference in color from the very light to the very dark in the limes, I think they are a bit distracting in this block.
Thread
Thread Starter
Forum
Replies
Last Post
Janice McC
Member Swaps and Round/Row Robins
1126
08-30-2017 07:24 PM
Janice McC
Member Swaps and Round/Row Robins
2112
06-07-2017 12:46 PM
Janice McC
Member Swaps and Round/Row Robins
698
07-29-2015 06:36 PM
Janice McC
Member Swaps and Round/Row Robins
923
03-21-2015 06:34 PM