String spin around block
08-15-2019, 05:44 PM
#33
Senior Member
Thread Starter
Join Date: Aug 2010
Location: Qld, Australia
Posts: 984
Originally Posted by Mousie
are you a member of scrap quilt enthusiasts bc they have been made in
droves on there and I love this block myself.
Have been redoing a room for sewing so haven't sewn all summer.
I don't go by mousie on there
.
droves on there and I love this block myself.
Have been redoing a room for sewing so haven't sewn all summer.
I don't go by mousie on there
.
08-15-2019, 09:49 PM
#34
Senior Member
Thread Starter
Join Date: Aug 2010
Location: Qld, Australia
Posts: 984
Originally Posted by maviskw
The quilt shown here starts out with 40 in strips sewn together.
If I start with a 2 in. center square, the strip sets should be about six inches long by 3 inches wide. Cut that on the diagonal. Then you need to add a triangle to each corner. Adding the triangle saves a whole lot of fabric that would otherwise be cut off at each corner.
I haven't made this yet, so this is still an idea that I think might work !
If I start with a 2 in. center square, the strip sets should be about six inches long by 3 inches wide. Cut that on the diagonal. Then you need to add a triangle to each corner. Adding the triangle saves a whole lot of fabric that would otherwise be cut off at each corner.
I haven't made this yet, so this is still an idea that I think might work !
15” block = 4 7/8 centre - 9 1/4 x 13 3/4 strips rectangle
Hope this helps 😉 Good luck 😁
08-16-2019, 06:18 AM
#37
Super Member
Join Date: Apr 2010
Location: Missouri
Posts: 3,430
Facebook is all abuzz about this block! pattern and sewing directions by Bertha Mae Sturgell. Love this block using border prints, stripes or chevron prints.
Last edited by QuiltnNan; 08-16-2019 at 07:49 AM. Reason: referenced page requires sign up
08-29-2019, 10:46 AM
#38
Super Member
Join Date: May 2012
Location: Central Wisconsin
Posts: 4,391
Originally Posted by Elfi2
12” block = 4” centre - 7 5/8 x 11 1/8 strips rectangle
15” block = 4 7/8 centre - 9 1/4 x 13 3/4 strips rectangle
Hope this helps Good luck
15” block = 4 7/8 centre - 9 1/4 x 13 3/4 strips rectangle
Hope this helps Good luck
Then I made another with strips 12 1/2 inches long and the strip set 6 1/2 inches wide. I used a center that was 3 1/2 inches square. Perfect. That showed me the formula: 8-4-2 or 12-6-3 Add seam allowances to each of these pieces and it comes out.
But when you make it this way, the corners are not covered. I needed to add a small triangle to each corner. I found fabric that matched or almost matched other fabrics. Beautiful!
Thread
Thread Starter
Forum
Replies
Last Post
