Will the Real 15 clone please stand up
#491
Power Poster
Thread Starter
Join Date: Mar 2011
Location: Somewhere
Posts: 15,506
That gorgeous pink and gray machine belongs here:
http://www.quiltingboard.com/vintage...s-t207877.html
http://www.quiltingboard.com/vintage...s-t207877.html
#492
The local Junk Dealer called today and wanted to sell me a sewing machine that just came in. They don’t have room for sewing machines, so they pass them on to me when they can. It’s a Japanese HA-1 (Singer Clone) machine that had a pin wrap on the arm, and the name is rubbed off to where I can’t read it. I may never figure out what the name was on this machine, but I thought I ask here at QB in case someone has seen a similar one.
I looked through the Will the REAL 15 clone please stand up thread and found only one that looked anything like it, but I can’t read the name on that one either. It is at Post #366.
CD in Oklahoma
I looked through the Will the REAL 15 clone please stand up thread and found only one that looked anything like it, but I can’t read the name on that one either. It is at Post #366.
CD in Oklahoma
#495
The 12-page “manual” (more like a brochure) has a fill-in-the-blank area for the name of the machine. A banner has three text areas showing, with the first one saying “Instructions for the Care and Use of Your”, then a blank banner, then “Sewing Machine’. All photos of the machine both on the cover and inside show the machine with no name on the arm. These appear to be “No Name” machines by design.
CD in Oklahoma
#496
Super Member
Join Date: Feb 2012
Posts: 8,091
Joe
#498
Super Member
Join Date: Feb 2012
Posts: 8,091
Mary&Me, I have a little one very similar to yours. Mine is labeled Ambassador and I LOVE it! Check out the close quarters on the feed dogs. Perfect to piece with, the mini one in the middle even grabs the outer edge of the cloth when I am doing scant 1/4" allowances.
What is your foot pedal like? Mine has the hot stuff on the side and the pedal perpendicular to it. I'd love to know how folks feel about the set up. I can stitch for ages without a hot foot!!!
What is your foot pedal like? Mine has the hot stuff on the side and the pedal perpendicular to it. I'd love to know how folks feel about the set up. I can stitch for ages without a hot foot!!!
[ATTACH=CONFIG]479983[/ATTACH]
I really like them. I can get my foot on the pedal without searching for the right position.
Joe
#499
Super Member
Join Date: Nov 2010
Location: Cadillac, MI
Posts: 6,487
redbugsullivan, does your foot pedal get very warm? I have one similar to Joe's picture on my Admiral. I stopped using that machine because the pedal seemed too warm. It's such a pretty thing - shiny black with Art Deco designs in turquoise and silver. I'd like to use it or sell it. I guess it's going in the newspaper.
#500
Older carbon foot controllers generate heat. Some much more than others. You can change out the controller for a new electronic one for about $30 or get a new carbon one for about $15 and that will clear up the problem with the heat.
~Grant~
~Grant~
Thread
Thread Starter
Forum
Replies
Last Post
OurWorkbench
For Vintage & Antique Machine Enthusiasts
106
03-14-2016 04:40 PM
olebat
For Vintage & Antique Machine Enthusiasts
14
04-06-2013 03:54 PM