Orphaned Blocks QAYG Challenge
#381
Power Poster
Join Date: Jul 2008
Location: East Oklahoma - pining for Massachusetts
Posts: 10,477
Vicki, I have thought about varigated thread many times while working on quilts. I will give it a try someday. On this on, I have started with a light cream color. Had two done before I got your message. I will do it someday though, I promise.
#382
[ATTACH=CONFIG]356015[/ATTACH]Well, just finished putting the sashings on and sewing the rows together. I'm pleased with how this turned out. No not everything lines up exactly, but that's okay. When I do the next one it will be with fabrics that don't stand out as much when joining. Can't wait to see what Jen adds tomorrow.
Take care everyone.
Take care everyone.
#383
Super Member
Join Date: Mar 2007
Location: Lansing, MI
Posts: 1,038
without a design wall for me to play with your blocks, if you try this arrangement and take a pic, maybe we can help you further. Although I'm thinking you might have to add a couple more rows to those "center" blocks.
It could turn out awful once I see it on your wall but that's how I figure things out :-)
#385
Vicig626, thanks for the suggestion. Going to give it a try in just a little while. I have more of the Indian girls and the strip star blocks. I also have strip pieces of the bright colored 9 patches that I could make up very quickly. Don't have any more of the other blocks. I do have more orphan blocks, but can't find them right now. I thought they were all together.
Everose, your quilt is adorable.
Everose, your quilt is adorable.
#386
Adding borders
[ATTACH=CONFIG]356040[/ATTACH]
Using the same sandwiching technique I used to make the squares, I cut my top borders to my finished size adding in the 1/4 inch seam allowance. I cut my batting at least half an inch larger then my top borders. I cut the back pieces almost the same size the my batting. I used spray basting adhesive. I lightly heat pressed the backing onto the batting first then I flipped over the unit and sprayed the batting with adhesive and then gently rolled my top border piece down the batting border smoothing and re-positioning as needed to center my top border piece onto the Border Sandwich. I have already chalked traced my design onto my top border. I did not heat set the top border because I was not sure if the iron would mess up my stenciling or possible set the colored chalk into the fabric.
[ATTACH=CONFIG]356043[/ATTACH]
I ran a basting stitch around the edges of the Border Sandwich and then began to quilt my design on the border.
[ATTACH=CONFIG]356044[/ATTACH]
When I quilted the center of the short and long side strips I rolled the front and back of the border into a scroll. I found that this gave me great control and I was easily able to guide the needle. (In the picture above I am quilting the bottom border. I did not take the extra step of basting all the way around the edges. I had found that the spray basting was holding well enough.) I don't know that this will always hold true. *** My personal thoughts are that the denser quilting designs such as stippling or tight geometrical designs need to have the extra hold of the sewn basting around the edges. ***
[ATTACH=CONFIG]356045[/ATTACH]
I then trimmed the excess batting and backing.
[ATTACH=CONFIG]356046[/ATTACH]
To give myself room for error I made my top border longer than it needed to be. So at this point I trimmed both sides of the top border in relation to the design of my quilting. Now Im ready to attach the border to my center piece.
Using the same sandwiching technique I used to make the squares, I cut my top borders to my finished size adding in the 1/4 inch seam allowance. I cut my batting at least half an inch larger then my top borders. I cut the back pieces almost the same size the my batting. I used spray basting adhesive. I lightly heat pressed the backing onto the batting first then I flipped over the unit and sprayed the batting with adhesive and then gently rolled my top border piece down the batting border smoothing and re-positioning as needed to center my top border piece onto the Border Sandwich. I have already chalked traced my design onto my top border. I did not heat set the top border because I was not sure if the iron would mess up my stenciling or possible set the colored chalk into the fabric.
[ATTACH=CONFIG]356043[/ATTACH]
I ran a basting stitch around the edges of the Border Sandwich and then began to quilt my design on the border.
[ATTACH=CONFIG]356044[/ATTACH]
When I quilted the center of the short and long side strips I rolled the front and back of the border into a scroll. I found that this gave me great control and I was easily able to guide the needle. (In the picture above I am quilting the bottom border. I did not take the extra step of basting all the way around the edges. I had found that the spray basting was holding well enough.) I don't know that this will always hold true. *** My personal thoughts are that the denser quilting designs such as stippling or tight geometrical designs need to have the extra hold of the sewn basting around the edges. ***
[ATTACH=CONFIG]356045[/ATTACH]
I then trimmed the excess batting and backing.
[ATTACH=CONFIG]356046[/ATTACH]
To give myself room for error I made my top border longer than it needed to be. So at this point I trimmed both sides of the top border in relation to the design of my quilting. Now Im ready to attach the border to my center piece.
#387
ADDING BORDERS Part II
[ATTACH=CONFIG]356058[/ATTACH]
Using the same length 1 inch top and the folded 1-3/4 back sashing strip I prepare to attach the top border strip to the central unit of the quilt.
[ATTACH=CONFIG]356059[/ATTACH]
To help deal with the bulk of my center unit. I fan folded the center unit and used clips to hold it in place.
[ATTACH=CONFIG]356060[/ATTACH] [ATTACH=CONFIG]356061[/ATTACH]
This created a nice compact unit I could manage at the sewing machine.
[ATTACH=CONFIG]356062[/ATTACH]
Once I finished attaching the border unit then I squared the corners.
[ATTACH=CONFIG]356063[/ATTACH]
The top border is attached and I'm ready to move on to attaching the bottom and then the two sides in the same manner.
[ATTACH=CONFIG]356064[/ATTACH]
I will post pictures of my front and back finished project picture as soon as I'm done with the binding. I look forward to seeing more finished projects Ladies.
Have an Awesome Day.
Using the same length 1 inch top and the folded 1-3/4 back sashing strip I prepare to attach the top border strip to the central unit of the quilt.
[ATTACH=CONFIG]356059[/ATTACH]
To help deal with the bulk of my center unit. I fan folded the center unit and used clips to hold it in place.
[ATTACH=CONFIG]356060[/ATTACH] [ATTACH=CONFIG]356061[/ATTACH]
This created a nice compact unit I could manage at the sewing machine.
[ATTACH=CONFIG]356062[/ATTACH]
Once I finished attaching the border unit then I squared the corners.
[ATTACH=CONFIG]356063[/ATTACH]
The top border is attached and I'm ready to move on to attaching the bottom and then the two sides in the same manner.
[ATTACH=CONFIG]356064[/ATTACH]
I will post pictures of my front and back finished project picture as soon as I'm done with the binding. I look forward to seeing more finished projects Ladies.
Have an Awesome Day.
#389
Super Member
Join Date: Aug 2010
Location: Camarillo, CA
Posts: 4,607
Jenniky, can you share what type of chalk you used to trace your design on the border. It left such a nice thin line! I need to get some of that. I always have a problem knowing what to use tracing my designs.
#390
I found it at JoAnn's I dont remember the brand or who made it. Our JoAnn's here had apparently just received them in and was telling me how great they were. Here is a picture. If you havent found them or someone else can not give us a name then next time Im at JoAnn's I will look for them again and get the Brand Name. It seems to me they were in the aisle where all the Singer Sewing gadgets area. Also I have to say by the time I was done quilting and attaching the borders you could barely see the purple chalk on the white material. Once its washed I'm positive it will be clear as a whistle.. but before we whistle I will make sure and wash the quilt...LOL
[ATTACH=CONFIG]356192[/ATTACH]
Last edited by Jenniky; 08-17-2012 at 02:09 PM.
Thread
Thread Starter
Forum
Replies
Last Post
bailey
Pictures
18
05-24-2017 07:47 AM
craftybear
Links and Resources
5
09-18-2011 10:25 PM
DannyValentine
Main
17
08-09-2011 06:08 PM