Go Back  Quiltingboard Forums >
  • Main
  • For Vintage & Antique Machine Enthusiasts
  • Frozen 201 Singer sewing machine? >
  • Frozen 201 Singer sewing machine?

  • Frozen 201 Singer sewing machine?

    Thread Tools
     
    Old 11-26-2021, 04:44 PM
      #31  
    Junior Member
     
    Join Date: Jan 2021
    Posts: 145
    Default

    In your last picture, right in the centre, is that a broken needle? There's something that looks a bit like a broken needle sticking up at about a 45 degree angle and it looks like it's stuck in the gears. What I'm looking at is right behind the horizontal shaft.
    1.41 is offline  
    Old 11-26-2021, 05:39 PM
      #32  
    Super Member
    Thread Starter
     
    Christine-'s Avatar
     
    Join Date: Jan 2012
    Location: USA
    Posts: 1,625
    Default

    Is this the correct video? At the 9:30 mark he is talking about timing a 201. [edit: I found the bushing at 20:32... I removed the fly wheel and the motor and the machine still isn't moving. So I don't think it's the bushing.]

    Also, I did remove the hook and the bobbin shaft and gear. I wanted to see if there might be a bit of broken needle caught up in the gears and there was none. I'm not sure what that is in the photo, hmmm....

    Originally Posted by 1.41
    Look here: .

    https://www.youtube.com/watch?v=i-8G5AaVD3o

    At 9:32 Bob Fowler explains how to loosen a pushed in stop motion bushing. I don't think one needs the tool he uses. A $10 plumber's faucet remover might do, a few small taps with a hammer all around the bushing would also be something I would try if it were me. He also welcomes emails with questions about machine repairs. Use "My Worst Nightmare" in the subject line.

    Also, if you haven't removed the hook assembly, I would certainly do that to look at whether a piece of a broken needle or a entire needle has slipped inside the assembly.

    Last edited by Christine-; 11-26-2021 at 05:57 PM.
    Christine- is offline  
    Old 11-26-2021, 06:43 PM
      #33  
    Junior Member
     
    Join Date: Jan 2021
    Posts: 145
    Default

    I think you know the picture I mean, it's this one: Right in the centre of the picture something that looks like a needle seems to be sticking up.
    Attached Images  
    1.41 is offline  
    Old 11-26-2021, 06:52 PM
      #34  
    Super Member
    Thread Starter
     
    Christine-'s Avatar
     
    Join Date: Jan 2012
    Location: USA
    Posts: 1,625
    Default

    Originally Posted by 1.41
    I think you know the picture I mean, it's this one: Right in the centre of the picture something that looks like a needle seems to be sticking up.
    That thing sticking up is the clip found on the bottom of the bar that holds the hook in place. I have removed that bar, the hook, the bobbin shaft and the gear at the bottom of the shaft (after marking it so I know exactly how it fits back in there!). And the machine still won't move. I am not comfortable removing anymore parts on the machine, it has reached the limit of my knowledge at this point. I found someone who has worked on these old machines for over 40 years and he said he would come to see what was wrong on Monday. So I'll keep you updated on the progress. I'm bound and determined to get this great machine running!
    Christine- is offline  
    Old 11-27-2021, 08:35 AM
      #35  
    Junior Member
     
    Join Date: Feb 2021
    Location: My own private Idaho
    Posts: 182
    Default

    Originally Posted by Christine-
    P.S.: I have done all of the following...
    Are you sure the balane wheel is engaged? This would keep the needle bar from moving up and down.

    Have a great day and I hope you get it resolved!
    FoggyButFocused is offline  
    Old 11-27-2021, 08:40 AM
      #36  
    Super Member
    Thread Starter
     
    Christine-'s Avatar
     
    Join Date: Jan 2012
    Location: USA
    Posts: 1,625
    Default

    Originally Posted by FoggyButFocused
    Are you sure the balane wheel is engaged? This would keep the needle bar from moving up and down.

    Have a great day and I hope you get it resolved!
    That was the first thing I checked. I have since removed the wheel and also the motor, yet it still doesn't move.
    I have a guy coming on Monday who has 40+ yrs experience to help figure out what is wrong with it.

    Christine- is offline  
    Old 11-27-2021, 09:05 PM
      #37  
    Junior Member
     
    Join Date: Jan 2021
    Posts: 145
    Default

    Sorry, but now I'm confused. I see a silver coloured pointed pin or needle shaped object in the centre of the picture, right up against the bed of the machine, behind the hook driving shaft. It doesn't look like a clip, it looks for all the world like a pin or a needle stuck in the drive gear. I looked at the Adjusters Manual for this machine and didn't see anything like that in that area.
    1.41 is offline  
    Old 11-27-2021, 11:19 PM
      #38  
    Super Member
    Thread Starter
     
    Christine-'s Avatar
     
    Join Date: Jan 2012
    Location: USA
    Posts: 1,625
    Default

    Yes, it's not a pin or needle. Here is a photo of the clip you're seeing.

    Christine- is offline  
    Old 11-27-2021, 11:40 PM
      #39  
    Junior Member
     
    Join Date: Jan 2021
    Posts: 145
    Default

    Right. I now understand thanks Christine. In the first image, there seems to be something that looks like a braided cable in the arm of the machine, What is that? And could that be blocking the movement of the upper shaft?
    1.41 is offline  
    Old 11-27-2021, 11:44 PM
      #40  
    Super Member
    Thread Starter
     
    Christine-'s Avatar
     
    Join Date: Jan 2012
    Location: USA
    Posts: 1,625
    Default

    I'm not certain but I think that is the wiring that goes to the light. That's the only thing I can think of.

    I have someone coming on Monday to look at the machine. He has 40+ yrs experience working on these vintage machines. I'm looking forward to finding an answer to why this machine won't move. I'll keep you posted.
    Christine- is offline  

    Posting Rules
    You may not post new threads
    You may not post replies
    You may not post attachments
    You may not edit your posts

    BB code is On
    Smilies are On
    [IMG] code is On
    HTML code is Off
    Trackbacks are Off
    Pingbacks are Off
    Refbacks are Off



    FREE Quilting Newsletter