Half-Square Triangle Migraine
04-02-2011, 06:22 AM
#141
Super Member
Join Date: Jan 2011
Location: Melbourne, Florida
Posts: 1,133
If you started with a 5" square and trying to get 3 1/2" squares your method will not work. I tried several different fabrics and taking a 5" square and sewing all around then cutting the way you said will give you 3 1/4" squares which will throw off everything else.
If you don't like sewing HSTs you should try "Triangulations" CD. It has HSTs and HQTs in a lot of different sizes and they come out perfect everytime.
Carmen
If you don't like sewing HSTs you should try "Triangulations" CD. It has HSTs and HQTs in a lot of different sizes and they come out perfect everytime.
Carmen
04-02-2011, 09:24 AM
#144
Senior Member
Join Date: Sep 2010
Location: Ontario, Canada
Posts: 387
Originally Posted by danade
Scissor Queen's way is the very simplest and "right" way to do HST. I've read Norelli's post several times and I still can't figure out how she attempted to do it by sewing all around the edges, nor where she would have gotten this information. Also if you do it as Scissor Queen suggests, you can chain piece hundreds of these without stopping, sewing an accurate 1/4-inch on either side of the marked diagonal line, and then cut them apart and cut through the diagonal line--voila! Zillions of half-square triangles! (Be sure to add the 7/8 of an inch to the size you want your finished triangles to turn out when you cut out your squares.)
04-02-2011, 08:41 PM
#148
Senior Member
Join Date: Jan 2011
Posts: 506
Originally Posted by Scissor Queen
I would never do them that way. You end up with bias edges on all the edges. Cut the squares bigger, draw the line down the center and sew a quarter inch away and then trim them down. The rule is to add 7/8ths of an inch but you can add an inch or even an inch and a quarter and the square them up to perfect.
:thumbup: :roll:
04-03-2011, 12:46 AM
#149
Super Member
Join Date: Jun 2010
Location: Queensland Australia
Posts: 1,388
Originally Posted by Scissor Queen
I would never do them that way. You end up with bias edges on all the edges. Cut the squares bigger, draw the line down the center and sew a quarter inch away and then trim them down. The rule is to add 7/8ths of an inch but you can add an inch or even an inch and a quarter and the square them up to perfect.
04-03-2011, 12:46 AM
#150
Super Member
Join Date: Jun 2010
Location: Queensland Australia
Posts: 1,388
Originally Posted by Scissor Queen
I would never do them that way. You end up with bias edges on all the edges. Cut the squares bigger, draw the line down the center and sew a quarter inch away and then trim them down. The rule is to add 7/8ths of an inch but you can add an inch or even an inch and a quarter and the square them up to perfect.
Thread
Thread Starter
Forum
Replies
Last Post
craftybear
Links and Resources
4
04-05-2011 03:05 PM
