Help with skipping stitches! PLEASE!

Reply Subscribe

Page 2 of 2

Thread Tools

12-09-2010, 08:33 AM

#11

scowlkat

Super Member

Join Date: Jul 2010

Posts: 2,500

Also you can put a layer of tissue paper on the bottom and it helps prevent the lint getting into your machine. If your machine has an adjustment to increase the pressure on your foot, that will also help.

12-09-2010, 10:38 AM

#12

EasyPeezy

Super Member

Join Date: Mar 2010

Location: Canada

Posts: 3,458

Using the right needle makes a big difference. I think I used a denim needle
last time I sewed microfleece but Schmetz also makes Stretch and Microtex
which should also work. Also, remember that fleece/synthetic fabrics tend to
dull needles quickly.

12-10-2010, 05:50 AM

#13

buslady

Super Member

Thread Starter

Join Date: Jul 2010

Location: Thumb of Michigan

Posts: 2,250

Thank you guys for all the help! I knew i could count on you! I got a needle for knits and that did the trick. Something soooo simple. Thanks a bunch.

12-10-2010, 05:59 AM

#14

Carol J.

Senior Member

Join Date: Jul 2010

Location: Wisconsin

Posts: 502

Try using your walking foot when sewing on fleece, the extra thickness of the fabric could be confusing your machine. I believe on Berninas it is called the differential foot which means the machine will sew on any thickness. Use a longer length stitch too.

Carol J.

12-10-2010, 09:00 AM

#15

shrabar

Senior Member

Join Date: Nov 2006

Location: Cape Girardeau, MO

Posts: 433

I would use a washable stablizer on top it helps I do a lot of embroidery on fleece material.shrabar

12-10-2010, 05:00 PM

#16

jitkaau

Super Member

Join Date: Aug 2010

Location: Australia

Posts: 4,116

Whether by luck or design, I don't have any problem sewing this material. It is easier than other fabrics. So here is how I have it set up (if it is any help): I have a top stitch needle, usually 90 or 100 and a stitch length of 3 - 3.5. Best of luck.

12-10-2010, 07:19 PM

#17

IBQUILTIN

Super Member

Join Date: Oct 2009

Location: North Fork Ca

Posts: 8,234

If you have a walking foot, it might make a difference too. When I notice the fuzz building up on my needle itself, its time to stop and brush it all out again. Its a pain, but worth the effort

12-11-2010, 05:55 AM

#18

ree-nee

Junior Member

Join Date: Jun 2010

Location: Sweet Home, Alabama

Posts: 261

try a larger needle like one used for sewing denim.

12-11-2010, 12:21 PM

#19

grammyj

Super Member

Join Date: Mar 2010

Location: Kenova,West Virginia

Posts: 1,033

Quote:

Originally Posted by buslady

I am making hats and scarves for kids, some for my DGK's and some for charity. I am having a problem with my machine skipping stitches; I am using fleece. I noticed with the last quilt I used the fleece for I had the same problem. I have torn the machine down and took out a pile of "fluff" and oiled the machine, and changed the needle. Does anyone have a solution to this delemma? I am getting VERY frustrated. I have a Janome 6282 and a featherweight, both seem to have this issue. I am sure it is the fabric. Thanks for any and all help.

I always use a ball point needle on knits