Go Back  Quiltingboard Forums >
  • Main
  • Input Requested >
  • Input Requested

  • Input Requested

    Thread Tools
     
    Old 01-01-2014, 07:23 AM
      #21  
    Super Member
     
    Join Date: Aug 2007
    Location: Clay Springs AZ
    Posts: 3,229
    Default

    Ive been using Fons and Porters flannel one, that cost about twenty dollars, for years and it works fine. Could have made one cheaper but that's no fun.
    Rose Marie is offline  
    Old 01-01-2014, 07:48 AM
      #22  
    Junior Member
    Thread Starter
     
    Join Date: Nov 2013
    Location: Texas
    Posts: 149
    Default

    Thank all of you for the responses! I have both on hand, so I guess I'll just play with both and see which works best for me. That's one thing I love about quilting...there's always more than one way to do anything!!!
    Happy New Year!!!!!!
    Chaney Ranch is offline  
    Old 01-01-2014, 07:57 AM
      #23  
    Super Member
     
    Join Date: Sep 2011
    Location: Carroll, Iowa
    Posts: 3,415
    Default

    I used leftover W & N. Occasionally I'll spray some quilting spray over the entire surface if my blocks fall off. About once a month I take the vacuum to it to get all the loose threads off or at least most of them.
    Snooze2978 is offline  
    Old 01-01-2014, 09:39 AM
      #24  
    Senior Member
     
    Join Date: Nov 2011
    Posts: 368
    Default

    Originally Posted by Donnamarie
    Personally, I don't have a design wall but I have heard of people using flannel backed tablecloths for this purpose.
    This is what I used. Actually it is one of those pads you use under a tablecloth to protect your table and reduce noise, I think. Works very well and is cheap at Walmart. Having said that the only glitch was getting it flattened out and the fold lines smoothed down. I finally put it in my dryer with a fabric softener sheet which helped. You can't iron it, so hopefully it will keep relaxing with use.
    dc989 is offline  
    Old 01-01-2014, 10:04 AM
      #25  
    Junior Member
     
    RainydayQuilter's Avatar
     
    Join Date: Mar 2012
    Location: Kansas-Oklahoma state line
    Posts: 167
    Default

    I have a cheap beige acrylic full size blanket from walmart ( was less than $10.00). When I bought it I thought it was worth a try and if it didn't work I'd donate the blanket. Several years later it still works great. It's attached to the wall with command hooks and binder clips.
    RainydayQuilter is offline  
    Old 01-01-2014, 10:23 AM
      #26  
    Super Member
     
    wildyard's Avatar
     
    Join Date: Mar 2010
    Location: Upstate NY, north of Syracuse Area
    Posts: 6,003
    Default

    I too used the flannel tablecloths with the plastic against the wall. It works fantastically. I got mine for $1 each at the thrift store. I have had kaleidoscope blocks hanging on it for at least a month and they have not fallen off at all.
    wildyard is offline  
    Old 01-01-2014, 10:26 AM
      #27  
    Super Member
     
    wildyard's Avatar
     
    Join Date: Mar 2010
    Location: Upstate NY, north of Syracuse Area
    Posts: 6,003
    Default

    Originally Posted by dc989
    This is what I used. Actually it is one of those pads you use under a tablecloth to protect your table and reduce noise, I think. Works very well and is cheap at Walmart. Having said that the only glitch was getting it flattened out and the fold lines smoothed down. I finally put it in my dryer with a fabric softener sheet which helped. You can't iron it, so hopefully it will keep relaxing with use.
    If you toss it in the dryer just long enough to get it nice and hot, it will be flat and smooth if you then hang it on the wall right away.
    wildyard is offline  
    Old 01-01-2014, 10:36 AM
      #28  
    Junior Member
     
    Join Date: Jul 2013
    Location: Canastota NY
    Posts: 170
    Default

    Originally Posted by CarolynMT
    I just put my design wall up all I did was thumbtack up 2 oblong tablecloths to wall, with plastic side against wall. Attached my center panel and the one sample block and it is holding just fine. $4 tablecloths from walmart

    [ATTACH=CONFIG]453903[/ATTACH]
    Love this idea, and so reasonable!
    MaureenT is offline  
    Old 01-01-2014, 11:01 AM
      #29  
    Super Member
     
    oldtnquiltinglady's Avatar
     
    Join Date: Aug 2011
    Location: Lafayette, TN
    Posts: 1,204
    Default

    Mine is an old, flannel backed picnic cloth. Learned this in the first quilting lesson I took in 2002 or so, and it is still perfect for my use. At the time I had never even heard of a design wall, and now I have had one for over 10 years.
    oldtnquiltinglady is offline  
    Old 01-01-2014, 11:43 AM
      #30  
    Senior Member
     
    Join Date: Sep 2010
    Location: Vancouver, WA
    Posts: 835
    Default

    My design wall is a fleece blanket suspended from a curtain rod by shower clips. I do need to vacuum it every once in a while and heavy blocks get pinned.

    I use a flannel backed tablecloth to take projects back and forth to our weekly meeting.
    kayluvs2quilt is offline  
    Related Topics
    Thread
    Thread Starter
    Forum
    Replies
    Last Post
    JulieB
    Pictures
    28
    03-11-2018 06:20 AM
    SouthPStitches
    Main
    10
    07-30-2012 12:50 PM
    Raggiemom
    General Chit-Chat (non-quilting talk)
    42
    06-04-2011 07:43 AM
    sondray
    Links and Resources
    0
    05-04-2009 05:27 AM
    Jim's Gem
    Pictures
    22
    02-28-2009 12:40 PM

    Posting Rules
    You may not post new threads
    You may not post replies
    You may not post attachments
    You may not edit your posts

    BB code is On
    Smilies are On
    [IMG] code is On
    HTML code is On
    Trackbacks are Off
    Pingbacks are Off
    Refbacks are Off



    FREE Quilting Newsletter