[DEAR] JANE STICKLE CYBER BLOCK PARTY - Jan 2010 thru May/Jun 2011
#5051
Thanks Lesley. I finished the tris a few weeks ago, then year end happened and this is a busy time at work! I have two kites, the scallops and then sewing the borders to the quilt top, for the finish line. Of course, mine will be long arm quilted... :lol: It is exciting to be so close.
I love seeing everyone else's progress and their blocks/quilt. They are all lovely with all the different themes and colors!!!
It is fun to see new people joining. Maybe somebody will start a new schedule for another one sew along on this quilt. :D
I love seeing everyone else's progress and their blocks/quilt. They are all lovely with all the different themes and colors!!!
It is fun to see new people joining. Maybe somebody will start a new schedule for another one sew along on this quilt. :D
#5054
Power Poster
Join Date: Sep 2007
Posts: 18,726
They don't automatically go on the JSCBP section...I added it though..so we are good to go! You did good posting...WooHoo! I added pics of mine on the thread.
Originally Posted by Janstar
I must have posted wrong on week 59 it went on BOM which I thought was correct but it didn't go on JSCBP. If you could fix it or delete it Patti go ahead.
#5055
Power Poster
Join Date: Sep 2007
Posts: 18,726
I didn't get as much done today as I would have liked, but I did get some things figured out. I sewed together one of the tri border rows. I'm attaching some pics so ya'll look and make sure I'm not screwing up.
Since I am planning trapunto (but I think I would do it this way even if I wasn't), I decided that I would sew the pieced tris with their batting to unbatted plain tris..see pic. This allows me to not have an overlap of batting on the back.
I found that I have a tiny bit at the bottom of the tri that overlaps and gets thick, so I've trimmed one side of that off.- see pic.
Now, I can add the batting for the trapunto work (which I will do by machine), then I can trim it, then I will add a reduced size tri of batting and hand stitch that in...see how much smaller it must be??? I'll have to trim down my stack of pre-cut batting triangles. This should result in no batting overlaps.
Here is a big question that I have though.....LESLEY>>>>HELP!
All 4 borders are made up of 13 pieced tris & 13 plain tris..all end up being the same length. Don't 2 of them need to be longer to allow for the addition of the skinny border?
Since I am planning trapunto (but I think I would do it this way even if I wasn't), I decided that I would sew the pieced tris with their batting to unbatted plain tris..see pic. This allows me to not have an overlap of batting on the back.
I found that I have a tiny bit at the bottom of the tri that overlaps and gets thick, so I've trimmed one side of that off.- see pic.
Now, I can add the batting for the trapunto work (which I will do by machine), then I can trim it, then I will add a reduced size tri of batting and hand stitch that in...see how much smaller it must be??? I'll have to trim down my stack of pre-cut batting triangles. This should result in no batting overlaps.
Here is a big question that I have though.....LESLEY>>>>HELP!
All 4 borders are made up of 13 pieced tris & 13 plain tris..all end up being the same length. Don't 2 of them need to be longer to allow for the addition of the skinny border?
This is how I'm sewing it together
[ATTACH=CONFIG]161868[/ATTACH]
Small trim at the bottom- batting only
[ATTACH=CONFIG]161869[/ATTACH]
Smaller batting tri that will inset
[ATTACH=CONFIG]161870[/ATTACH]
#5057
[quote=LaceladyCan you tell I really like it? LOL.[/quote]
Nope! :)
The Avante 18 comes with 2 stitch regulators - general & micro. There are also micro handles available as an option. Was just wondering if Sweetie was like the 18" version. That would be terrific!
Nope! :)
The Avante 18 comes with 2 stitch regulators - general & micro. There are also micro handles available as an option. Was just wondering if Sweetie was like the 18" version. That would be terrific!
#5058
[quote=QuiltswithConvicts]
Nope! :)
The Avante 18 comes with 2 stitch regulators - general & micro. There are also micro handles available as an option. Was just wondering if Sweetie was like the 18" version. That would be terrific!
Sweetie is updateable - if you have the cash. For instance, you can buy the frame for her to go on, and I think you can add the regulators, handles etc. too. You would need to check out the Handiquilter website.
Patti, not sure about your question - which two tris do you think have to be different because of that narrow edge border?
Don't forget that I had a 3/4in border, not a 1/4in one, and I didn't have a problem (though I was a bit worried about the corner kites at one point) I did make my in between tris a little bigger, which meant that they no longer came to a point, but that was all I did. When it came to adding the kites, they just went on like a dream - no problems at all. I'll have a look and see if I have a pic for you, if not, I'll take one.
No suitable pic, I'll get back to you on that one.
Originally Posted by LaceladyCan you tell I really like it? LOL.[/quote
Nope! :)
The Avante 18 comes with 2 stitch regulators - general & micro. There are also micro handles available as an option. Was just wondering if Sweetie was like the 18" version. That would be terrific!
Patti, not sure about your question - which two tris do you think have to be different because of that narrow edge border?
Don't forget that I had a 3/4in border, not a 1/4in one, and I didn't have a problem (though I was a bit worried about the corner kites at one point) I did make my in between tris a little bigger, which meant that they no longer came to a point, but that was all I did. When it came to adding the kites, they just went on like a dream - no problems at all. I'll have a look and see if I have a pic for you, if not, I'll take one.
No suitable pic, I'll get back to you on that one.
#5059
Here I am, did you miss me, LOL?
I took a couple of pics, Patti, to show you how my kites fitted onto the corner. As long as your border fits your centre when it has that narrow edge border on it, then the kite will just sit in between, as it actually takes up no room on the edge.
I was very pleased at how the angles of the kits just worked, and sat nicely so there was no puckering or pulling- BIG sigh of relief and happiness.
Last pic is for Kathy - just to show how Sweetie is coping with her first King sized quilt - no problems at all. Some puddling around the edges, but not a lot really and very comfortable to move round. That dark patch right in the middle is about 9in across, to give you an idea of scale.
I took a couple of pics, Patti, to show you how my kites fitted onto the corner. As long as your border fits your centre when it has that narrow edge border on it, then the kite will just sit in between, as it actually takes up no room on the edge.
I was very pleased at how the angles of the kits just worked, and sat nicely so there was no puckering or pulling- BIG sigh of relief and happiness.
Last pic is for Kathy - just to show how Sweetie is coping with her first King sized quilt - no problems at all. Some puddling around the edges, but not a lot really and very comfortable to move round. That dark patch right in the middle is about 9in across, to give you an idea of scale.
Kite corner
[ATTACH=CONFIG]162162[/ATTACH]
Detail of how they get joined on
[ATTACH=CONFIG]162163[/ATTACH]
Just to show the last one wasn't a fluke!
[ATTACH=CONFIG]162164[/ATTACH]
#5060
Lesley, I just love looking at your quilt, and now with Patti finishing up hers, everytime she posts pics, I love those too. Elle's is getting there and they're beautiful too. Everyones' blocks are stunning and the quilts they will become will be wonderful!
I have now quilted 102 blocks on JJ
I have now quilted 102 blocks on JJ
Thread
Thread Starter
Forum
Replies
Last Post
Cre8tvlwyr
Blocks of the Month and Week
2777
03-05-2014 12:12 PM
Cre8tvlwyr
Blocks of the Month and Week
875
01-14-2012 09:00 PM
Lacelady
Blocks of the Month and Week
73
04-20-2011 08:57 PM
sandpat
Blocks of the Month and Week
79
09-06-2010 05:24 PM
Lacelady
Blocks of the Month and Week
89
06-17-2010 06:40 AM