patchsamkim

I only use my walking foot when doing stitch in the ditch quilting, or other straight line quilting. It is too bulky to me to use for other stitching, it doesn't do a 1/4" seam, I would rather do free motion quilting if at all possible. Guess that means I don't love the foot, but I am glad I have it when I need it.
Another name for the walking foot is "plaid matcher" as it feeds in both layers of fabric and keeps plaids lined up so they don't get out of alignment as sewing.

New knee

I use the walking foot, but find that I have to sew very slow or the stitches become very small--even though I have the stitch set at a longer stitch. A lady from Bernina told me to remember that it is a "walking"' foot and not a "running foot." I like to use it to sew on binding and to quilt with if I am making straight lines.

BettyGee

I was told to go slow with the walking foot and I find that to be very good advice. I'm so happy to have the foot as it feeds everything so evenly and my fabric doesn't pucker.

ConnieF

The walking foot is for straight stitching.
I bought one many years ago for one of mu Viking machines, it is still in the box NEW. I used it once... I do not need it for I have upper and lower tenn adjustments and a scensor foot and haven't ever needed it.
ConnieF

patricej

absolutely spot-on advice. which is why they don't call it a "Pedal to the Metal Like There's No Tomorrow" foot.

don't ask how often i forget that little detail and have to unstitch. :lol:

TexasSunshine

My older Pfaff has a built in walking foot. It snaps down to use and up when not. I use it down on almost all sewing I do. It makes it much easier sewing. That is one of the best features on that machine.

Katiequiltsalot

I bought a generic walking foot mainly because I have 4 different kinds of machines.One is a 1950's Morse,which was made by White.Then I have a Montgomery Ward that DH bought me in 1977.The last one is a Singer.I also have a Pfaff I got from the job I had for 20 years working in a sewing factory.So a generic foot was almost necessary.I have used it on all and I love it.

patdesign

A walking foot feeds the top fabric at the same rate as the feed dogs feed the bottom fabric, it is especially useful on plaids, quilted items where the layers tend to shift, and on velvets and slippery fabrics. The tendency with a regular foot is for the presser foot to push the top layer towards you while the feed dogs pull the bottom fabric away from you causing misalignment. Hope this helps, its a great item and I keep mine on my 401 all the time. I use it for both straight and zig zag stitches. :-)

patdesign

If you know whether your machine is a low shank or high, or slant shank you can find these on ebay and other online sewing sites. Some of the newer machines walking feet are sold for that brand only, so you can find those on ebay or online retailers as well just make sure they will fit your particular machine. Also some of them fit 5mm machines, and some 7mm so if your feed dogs are the wider ones and you want to zig zag, be sure you get the one for wider feed dogs. :)

quiltmaker

I also have an older pfaff (7570) and use my walking most of the time except for free motion. There just isn't any comparison in my book for this feature. I also use it for many decorative stitches.....just have to remember to change the needle plate from the single hole to the wider rectangle type one or else I break a needle. Can't imagine not using or having one.