Hopping Ruler Quilting Foot
01-05-2022, 05:17 AM
#1
Super Member
Thread Starter
Join Date: Aug 2016
Location: Kansas
Posts: 4,436
Hopping Ruler Quilting Foot
I have the low shank Westlee ruler foot for ruler quilting and, while I enjoy using it, I wish it didn't float over the quilt. I find it gets caught on seams and I have to continually adjust the foot height. Does any company make a hopping ruler foot for a domestic low shank machine?
Or does anyone have any tips and tricks for quilting with rulers over seams?
Or does anyone have any tips and tricks for quilting with rulers over seams?
01-05-2022, 05:50 AM
#2
Junior Member
Join Date: May 2021
Posts: 123
The ruler foot is made so that it is to glide just above the fabric the quilt. It shouldn't be touching the fabric, so that the quilt is easily able to be moved in the direction needed to do the design.
I use these for quilting as well, and it helps that I hold the fabric taut with my hands as I hold the ruler down on the fabric. If you are constantly having it catch on seam ridges, you probably will need to either hold the fabric a little taut, or raise the over all height of your ruler foot so that you are not constantly having to readjust it.
There is a somewhat fine line in having it too low or too high. Too low and it catches on seam ridges or causes them to catch the fabric and sew a fold over for a couple of stitches, and too high, it causes skipped stitches when the fabric bounces or the movement is off.
My best advice is to find that sweet spot while holding the fabric taut, with keeping the ruler foot at a workable height. Then if you get to a higher or thicker seam ridge, slow down more and hold that part down better until you get over the ridge.
I use these for quilting as well, and it helps that I hold the fabric taut with my hands as I hold the ruler down on the fabric. If you are constantly having it catch on seam ridges, you probably will need to either hold the fabric a little taut, or raise the over all height of your ruler foot so that you are not constantly having to readjust it.
There is a somewhat fine line in having it too low or too high. Too low and it catches on seam ridges or causes them to catch the fabric and sew a fold over for a couple of stitches, and too high, it causes skipped stitches when the fabric bounces or the movement is off.
My best advice is to find that sweet spot while holding the fabric taut, with keeping the ruler foot at a workable height. Then if you get to a higher or thicker seam ridge, slow down more and hold that part down better until you get over the ridge.
Last edited by berrynice; 01-05-2022 at 05:53 AM.
01-05-2022, 09:12 AM
#4
Power Poster
Join Date: Mar 2011
Location: Ontario, Canada
Posts: 41,481
You do not want a hopping ruler foot or your ruler will slip under and get hit by the needle. I have an adjustable ruler foot on my Bernina and I do have to find the sweet spot. Too low and it doesn’t let me move the fabric sandwich well, too high and it won’t form a proper stitch or skip a stitch.
01-05-2022, 10:38 AM
#5
Super Member
Join Date: Nov 2010
Location: Utah
Posts: 2,074
What kind of machine do you have?
The "hop" is generally built into the sewing machine. You can watch from the side of your machine to see if your presser foot hops upward as the needle goes up.
On my Bernina 590, I have to adjust the presser foot height setting to "0" so it won't hop while I'm using my ruler foot.
The "hop" is generally built into the sewing machine. You can watch from the side of your machine to see if your presser foot hops upward as the needle goes up.
On my Bernina 590, I have to adjust the presser foot height setting to "0" so it won't hop while I'm using my ruler foot.
you are welcome, glad I could help!
