ladybird532

Thanks you folks are super with all the knowledge!

ploverwi2

I also use the freezer paper. I cut the freezer paper to a standard piece of printing paper size. Then I cut the plain fabric that I want the pictures on and iron them together, and they go through the printer nicely. You can then do family pictures, etc. also. Be sure to heat set them.

Havplenty

here is a link to the tute i used. hopefully it will work for you also.

http://www.instructables.com/id/Inkj...bric/?ALLSTEPS

woody

I used the pre treated fabric sheets put out by the Electric quilt company EQ, they were easy to use and seem to be lasting

ladybird532

Thanks everyone ! Ya'll are great!

rthiry

Here's my suggestions:
When using the bubble jet solution, I try to use 200 count muslin. I think it prints better.
I also treat a piece of fabric slightly larger than 8.5 x 11, then iron it to a piece of freezer paper, then trim both together down to 8.5 x 11 size. That way the edges are well adhered and work thru the ink jet well. My other thought: if using a commercially prepared product, besure to check to see if it is washable, if you might have to wash the project. Wishing you well on this project.

Tink's Mom

I had to make some quilt labels to attach to some quilted bears...my printer refused to accept the fabric/paper...so, had to go to a print shop to make them.

Mamaskeeto

Great information. I want to do a picture pillow for my daughter. I wanted to use 3 1/2 squares with pictures and fabric. I think I may try the Bubble Jet.

quiltstringz

Remember (most of the fabric you buy tells you this) you need to use an ink jet printer NOT A LASER. Caryl Bryer Fallert has some good info on her website

<CITE>www.bryerpatch.com/</CITE>