Chaz_Hoosier

I am sewing drapes, but am hoping quilters can give me some tips on how they manage large sheets of thick fabric. I keep bending needles trying to haul all the fabric through the machine. It starts with the needle making that quiet popping noise when it pierces the fabric, then thread snags, then I get bird's nests on the back of the fabric. I've already bent three needles and I am only halfway through the project!

patricej

you need to make sure you have enough space behind the machine and to the left.
if your fabric has nowhere to go once it's passed under the needle you will have bunching and dragging.
all that extra weight and resistance is bad for the needles and for the whole machine.

aashley333

When I hear that popping noise, I know to change my needle. It's not sharp. It only takes one time of hitting face plate, which is probably what is happening. The heavy fabric can "pull" the needle past the needle hole, causing the needle to hit metal. Then it is ruined and the popping sound starts. Maybe try a 90 or 100 size needle to sew and slow down your stitching. The needle has a lot of work to do. This is what I learned when making a blue jean quilt.

IceLeopard

Keep the weight of the fabric supported as much as possible, especially the fabric that is feeding under the needle. Don't let it dangle to the floor. Don't expect the feed dogs to pull up the entire weight of the fabric as you sew. They can't.

OurWorkbench

Are you using your 404 in the table? Did you get the hinges? I think you want support at the back and side of the machine at the same height as the bed of the machine. As mentioned at https://lorikennedyquilts.com/how-to...hine-quilting/ some have used boxes and other or placed against a wall so gravity doesn't pull the fabric.

ETA: There is a vintage table for the 400 series SM as seen at Singer 401A in a Mystery Cabinet and Singer 401/A

Janey - Neat people never make the exciting discoveries I do.
Not affiliated with off-site link(s)

NJ Quilter

I was going to suggest a larger needle as well. Upholstery/drapery fabrics vary greatly in weight. A larger needle will definitely help. But as Patrice mentioned also, you need to have support for the fabric behind the machine as well. I would also suggest putting the fabric yet to be stitched in your lap for additional support and less drag.

Chaz_Hoosier

The table I am using doesn't have that back support, which would be great. Maybe I'll move it next to the dining room table to support the back. Thank you!

sewingpup

I have my machine in a cabinet with a back support but I also will pull out my drawer to the left of my chair and cover it with the wood insert so I have another flat surface to the left to support the fabric and I have also used my ironing board as an additional surface to support the fabric. When I was making pleated drapes with pleating tape...yikes...many layers to stitch through...I did use a larger needle, my walking foot, and all the flat surface I could make. I also tried several of my machines....don't have a lot of vintage ones...but the only machine I had that could handle the job was my old Viking D1...computerized yep....but also a workhorse for utility work....I am gong to miss it greatly if the computer boards in it ever go down as there are no replacement parts for those.

Tartan

The drag of the fabric is bending the needle. You must support all the fabric up around the machine. Put the machine on a large table and if that doesn’t support it all, set up your ironing board or a extra card table to support the rest.

juliasb

I find folding the fabric in half then to quarters and using bicycle clips helps me the most with very heavy fabrics. By having enough table space to the left the fabric moves much easier. Ether a quilt or drapes having that extra table space works well with the bicycle clips.