Go Back  Quiltingboard Forums >
  • Main
  • Safety using old  sewing machines >
  • Safety using old sewing machines

  • Safety using old sewing machines

    Thread Tools
     
    Old 09-12-2011, 05:45 AM
      #1  
    Super Member
    Thread Starter
     
    Join Date: Jun 2011
    Location: Texas
    Posts: 3,017
    Default

    A friend mentioned she purchased a 1940s machine . When she plugged it in to check working order she got a shock. Has anyone experienced this with a machine? I purchased a old machine last week but am concerned about using it. No one in our area checks out machines. Is there an online source anyone can recommend?
    Thank you!
    gigi4419 is offline  
    Old 09-12-2011, 05:52 AM
      #2  
    Senior Member
     
    1000projects's Avatar
     
    Join Date: Jun 2011
    Location: Carmel Indiana
    Posts: 440
    Default

    http://blog.sew-classic.com/2009/01/...g-machine.aspx

    This site also sells replacement wiring :-)
    1000projects is offline  
    Old 09-12-2011, 06:10 AM
      #3  
    MTS
    Banned
     
    Join Date: Nov 2010
    Posts: 4,134
    Default

    Originally Posted by 1000projects
    http://blog.sew-classic.com/2009/01/...g-machine.aspx

    This site also sells replacement wiring :-)
    Perhaps they should rename that post

    inspecting-electrical-wires-on-a-classic-vintage-sewing-machine-before-plugging-it-in. :mrgreen:

    But it's really no joke. I still shudder (no pun intended) when I think of the one time I got a jolt plugging in a lamp. Not fun.

    Thanks for posting that site.
    MTS is offline  
    Old 09-12-2011, 07:00 AM
      #4  
    Super Member
     
    thepolyparrot's Avatar
     
    Join Date: Nov 2010
    Location: Mars
    Posts: 2,549
    Default

    We take the safety of electricity for granted, but that little shock is actually one of the better possible endings to that story. It alerted her to the fact that there's a short in the wiring - without killing her or burning her house down.

    People laugh at me for being paranoid but I buy all new electrical components for my "new" machines and I either have the potted motors re-wired or I buy new repro motors for them. Jenny at sew-classic.com has everything I need and it only takes a few minutes to replace it all.

    To me, this is a very small expense to avoid a fire or life-threatening shock.

    When I was a little girl, I was ironing something and I went outside for just a minute to check on the little kids. When I came back in, the iron had melted onto the ironing board, burned through the cover and set the ironing board on fire. That fast!

    Electricity isn't something to mess around with.
    thepolyparrot is offline  
    Old 09-12-2011, 08:44 AM
      #5  
    Power Poster
     
    Join Date: Feb 2009
    Location: Northern Michigan
    Posts: 12,861
    Default

    when ever you purchase a used machine- regardless of age you should before plugging it in check the condition of the cord...machines which have been stored (sometimes in barns & garages- but even in the house) can have weather checking- can be gnawed on by rodents---any number of things.
    any used electrical item can have the same issues-
    before plugging anything in check the cord-
    if it is in good condition the chance of getting a shock is pretty slim.
    ckcowl is offline  
    Old 09-12-2011, 12:00 PM
      #6  
    Super Member
     
    Join Date: Jul 2010
    Location: Central Willamette Valley, Oregon, USA
    Posts: 7,695
    Default

    Originally Posted by gigi4419
    A friend mentioned she purchased a 1940s machine . When she plugged it in to check working order she got a shock. Has anyone experienced this with a machine? I purchased a old machine last week but am concerned about using it. No one in our area checks out machines. Is there an online source anyone can recommend?
    Thank you!
    If it has been stored for any length of time, I would get a new cord just for GPs. I learned about deterioration of the cords from my job at Kirby. The older cords are made with rubber coating. Rubber breaks down if it is dried out, or old. You can not always see the damage with the naked eye, and never use a cloth covered cord! New wiring harnesses are available. Worth every dime. Please be safe. With a machine that old, I would just assume it might need repairs, and plan for it, AFTER you get new wiring.
    madamekelly is offline  
    Related Topics
    Thread
    Thread Starter
    Forum
    Replies
    Last Post
    Sassylass
    Main
    10
    05-09-2011 06:16 AM
    Rainybug
    Main
    38
    05-08-2011 04:07 AM
    moreland
    Main
    34
    12-29-2009 07:28 PM
    cathy1953
    Main
    11
    07-15-2008 05:21 AM

    Posting Rules
    You may not post new threads
    You may not post replies
    You may not post attachments
    You may not edit your posts

    BB code is On
    Smilies are On
    [IMG] code is On
    HTML code is On
    Trackbacks are Off
    Pingbacks are Off
    Refbacks are Off



    FREE Quilting Newsletter