What am I doing wrong?
#51
Super Member
Join Date: Jul 2010
Location: Lebanon Missouri
Posts: 2,668
this was happening to my brother while using my machine and the thread was working loose from the take-up arm then it was working loose from the bobbin catch It was exasperating was actually seeing RED After changing thread in top and bottom the problem was solved when I went to throw the offending spool away I noticed he had put a spool of Hand Quilting thread in the bobbin and top So now he knows which thread drawer to stay out of
#52
Super Member
Join Date: Oct 2010
Location: Prescott Valley, AZ
Posts: 1,329
Rethread your machine. Cut your top thread at the very top of your machine and pull the cut thread from the bottom so that it will drag any lint out of the machine with it. Make sure your pressure foot is UP. Now thread your machine. You can lower the presser foot to thread the needle. When you start quilting be sure to hold the end of the top thread between your fingers tightly. Hope this works; it usually works for me.
#53
Power Poster
Join Date: Dec 2008
Location: Western Wisconsin
Posts: 12,930
I was assuming you were pulling the bobbin thread to the top before starting to quilt. That is standard operating procedure for most quilters. Typically you then hold both threads for the first few stitches so they don't get tangled and create a thread nest. (Some machines are supposed to be non-jamming, so maybe this doesn't apply to them. I'm too old to change my ways, though, I think.)
I do think it's a good idea to fill bobbins at half speed, at least for most machines.
I do think it's a good idea to fill bobbins at half speed, at least for most machines.
#54
Super Member
Join Date: Aug 2010
Location: My Sewing Room
Posts: 1,180
Check to make sure your bobbin is threaded and inserted correctly. Check your top tension, is it too loose? Also, (this happened to me just yesterday) make sure the presser foot is down before you start sewing. All of these things will cause the thread mess underneath.
#56
Super Member
Join Date: Aug 2010
Location: Jacksonville, FL
Posts: 1,389
Originally Posted by Mo_Chride
I get so frustrated with machine quilting.
At the moment I am "trying" to machine quilt a twin sized quilt for my son. I have three more UFOs that are all stalled because of the machine quilting.
The one I am working on at the moment is a blue and white eight point star alternating with a red and white nine patch for a nautical themed room. The backing is a dark to medium blue bumpy minke. I sew with a Husquevarna 425 Fresia so there is no bobbin tension for me to adjust. It was very recently sent to get cleaned and adjusted and hasn't really been sewn with since I have been doing hand applique latey.
The biggest problem (if you have gotten through all that) that I am currently having is getting "nests" of the top thread on the back. I am quilting staight lines currently so am using the walking foot. I get a similar problem when free motion quilting but suspect that in that case I am just moving the quilt too fast. Also, I seem to get the problem almost exclusively in the last third of the bobbin.
Any thoughts on what I am doing wrong? I don't like to waste a third of a bobbin every time.
TIA
Tara
At the moment I am "trying" to machine quilt a twin sized quilt for my son. I have three more UFOs that are all stalled because of the machine quilting.
The one I am working on at the moment is a blue and white eight point star alternating with a red and white nine patch for a nautical themed room. The backing is a dark to medium blue bumpy minke. I sew with a Husquevarna 425 Fresia so there is no bobbin tension for me to adjust. It was very recently sent to get cleaned and adjusted and hasn't really been sewn with since I have been doing hand applique latey.
The biggest problem (if you have gotten through all that) that I am currently having is getting "nests" of the top thread on the back. I am quilting staight lines currently so am using the walking foot. I get a similar problem when free motion quilting but suspect that in that case I am just moving the quilt too fast. Also, I seem to get the problem almost exclusively in the last third of the bobbin.
Any thoughts on what I am doing wrong? I don't like to waste a third of a bobbin every time.
TIA
Tara
#57
Member
Join Date: Jan 2011
Location: Tequesta, Fl.
Posts: 36
If you already are using a quilting size needle, the problem could be the size of the bobbin. A friend had given me bobbins to use in my Pfaff machine which looked the same as what I had. However,they didn't work properly..you should be able to freely pull out the bobbin thread whenever it is in the machine. The "offsize" bobbins would catch and cause nests. Hope this helps.
#59
I have a Husquavarna Sapphire 870 and had problems when using fleece for a backing. I found that I had to switch my fabric selection from woven to stretch and used a sz 14 strretch needle and all worked great. Try those changes. Hope you have better luck!!
KathyKat
KathyKat
Originally Posted by Mo_Chride
I get so frustrated with machine quilting.
At the moment I am "trying" to machine quilt a twin sized quilt for my son. I have three more UFOs that are all stalled because of the machine quilting.
The one I am working on at the moment is a blue and white eight point star alternating with a red and white nine patch for a nautical themed room. The backing is a dark to medium blue bumpy minke. I sew with a Husquevarna 425 Fresia so there is no bobbin tension for me to adjust. It was very recently sent to get cleaned and adjusted and hasn't really been sewn with since I have been doing hand applique latey.
The biggest problem (if you have gotten through all that) that I am currently having is getting "nests" of the top thread on the back. I am quilting staight lines currently so am using the walking foot. I get a similar problem when free motion quilting but suspect that in that case I am just moving the quilt too fast. Also, I seem to get the problem almost exclusively in the last third of the bobbin.
Any thoughts on what I am doing wrong? I don't like to waste a third of a bobbin every time.
TIA
Tara
At the moment I am "trying" to machine quilt a twin sized quilt for my son. I have three more UFOs that are all stalled because of the machine quilting.
The one I am working on at the moment is a blue and white eight point star alternating with a red and white nine patch for a nautical themed room. The backing is a dark to medium blue bumpy minke. I sew with a Husquevarna 425 Fresia so there is no bobbin tension for me to adjust. It was very recently sent to get cleaned and adjusted and hasn't really been sewn with since I have been doing hand applique latey.
The biggest problem (if you have gotten through all that) that I am currently having is getting "nests" of the top thread on the back. I am quilting staight lines currently so am using the walking foot. I get a similar problem when free motion quilting but suspect that in that case I am just moving the quilt too fast. Also, I seem to get the problem almost exclusively in the last third of the bobbin.
Any thoughts on what I am doing wrong? I don't like to waste a third of a bobbin every time.
TIA
Tara
#60
,,,,,, the bobbin from "whipping" the thread around, something that can cause a bird's nest.......
Sometimes the thread whips around when the bobbin is inserted backwards. The thread either goes off to the right or to the left when inserted into the bobbin case. It makes a difference.
Sometimes the thread whips around when the bobbin is inserted backwards. The thread either goes off to the right or to the left when inserted into the bobbin case. It makes a difference.
Thread
Thread Starter
Forum
Replies
Last Post