Go Back  Quiltingboard Forums >
  • Main
  • For Vintage & Antique Machine Enthusiasts
  • Information on Hallmark Deluxe sewing machine >
  • Information on Hallmark Deluxe sewing machine

  • Information on Hallmark Deluxe sewing machine

    Thread Tools
     
    Old 04-22-2020, 06:37 PM
      #1  
    Member
    Thread Starter
     
    Join Date: Apr 2020
    Posts: 8
    Default Information on Hallmark Deluxe sewing machine

    Is anyone familiar with a Hallmark Deluxe sewing machine? Probably produced in the 50's to 60's. I cannot find much information on this model. I believe it was produced in Japan but not really sure. Any information would be greatly appreciated.

    Ryan
    Brazcaster is offline  
    Old 04-22-2020, 07:25 PM
      #2  
    Super Member
     
    OurWorkbench's Avatar
     
    Join Date: Mar 2015
    Location: Denver, CO
    Posts: 4,285
    Default

    Welcome, Ryan. You are probably right about it being a Japanese machine. There were lots of machines made in Japan and they came with lots of different "badges" on them, as evidenced by Vintage Japanese 'Badged' Zig Zag and Straight Sew Sewing Machines and Vintage Japanese 'Badged' sewing machine with fancy stitches

    A picture would probably help. You will probably need to reduce or compress the picture to a file size that is smaller than 2MB How to post images can be found at https://www.quiltingboard.com/attach...020-01-17-.pdf

    Janey - Neat people never make the exciting discoveries I do.
    OurWorkbench is offline  
    Old 04-22-2020, 08:02 PM
      #3  
    Member
    Thread Starter
     
    Join Date: Apr 2020
    Posts: 8
    Default

    Thanks for the information. Here are a few pictures of the Hallmark Deluxe.
    Attached Thumbnails fullsizeoutput_1bc3.jpeg   fullsizeoutput_1bc6.jpeg   fullsizeoutput_1bc5.jpeg   fullsizeoutput_1bc4.jpeg   fullsizeoutput_1bc7.jpeg  


    Last edited by Brazcaster; 04-22-2020 at 08:19 PM.
    Brazcaster is offline  
    Old 04-23-2020, 03:49 AM
      #4  
    Super Member
     
    Join Date: Apr 2007
    Location: Alturas, CA
    Posts: 9,393
    Default

    I can't help you with your request, but wanted to tell you that's a beautiful machine.
    pocoellie is offline  
    Old 04-23-2020, 05:33 AM
      #5  
    Super Member
     
    OurWorkbench's Avatar
     
    Join Date: Mar 2015
    Location: Denver, CO
    Posts: 4,285
    Default

    Nice looking machine. It appears that it is a straight stitch only machine. The knob on the bottom of the pillar is for adjusting the height of the feed dogs. It also looks like the pressure bar is released. To sew regular material you will probably need to press the center down.

    Something I forgot last night was to see if you can find a JA and/or JC number on the underside of the machine. It could be stamped, embossed or cast in the metal. Sometimes it can be found near the serial number. As you have probably discovered the serial number probably doesn't mean much. The list that I use to try to help identify who made the machine can be found at http://www.doubleveil.net/zssmp/resources.htm about 2/3rds the way down the page. I didn't see Hallmark listed. If you find either or both numbers, could you post a picture?

    Janey - Neat people never make the exciting discoveries I do.
    Not affiliated with off-site link(s)

    Last edited by OurWorkbench; 04-23-2020 at 05:41 AM. Reason: clarification
    OurWorkbench is offline  
    Old 04-23-2020, 06:24 AM
      #6  
    Super Member
     
    OurWorkbench's Avatar
     
    Join Date: Mar 2015
    Location: Denver, CO
    Posts: 4,285
    Default

    There used to be a Yahoo Group for Vintage Japanese Sewing Machines. I think that they went to https://www.facebook.com/groups/659877447448317/ when Yahoo stopped groups.

    Janey - Neat people never make the exciting discoveries I do.
    Not affiliated with off-site link(s)
    OurWorkbench is offline  
    Old 04-23-2020, 08:14 AM
      #7  
    Member
    Thread Starter
     
    Join Date: Apr 2020
    Posts: 8
    Default

    Thank you very much. I will try to get the numbers off of the machine today.

    Last edited by Brazcaster; 04-23-2020 at 08:18 AM.
    Brazcaster is offline  
    Old 04-23-2020, 08:39 AM
      #8  
    Super Member
     
    leonf's Avatar
     
    Join Date: May 2016
    Location: near Topeka kansas
    Posts: 4,524
    Default

    These are often called dashboard machines for their prominent knobs, etc. May give you another word to look for.
    leonf is offline  
    Old 04-23-2020, 01:22 PM
      #9  
    Member
    Thread Starter
     
    Join Date: Apr 2020
    Posts: 8
    Default

    Thanks leonf.
    Brazcaster is offline  
    Old 04-23-2020, 04:11 PM
      #10  
    Member
    Thread Starter
     
    Join Date: Apr 2020
    Posts: 8
    Default

    These are the photos of the model number. It looks like a J-C4, maybe J-G4. It also has a number 151 on it. The motor is a Twi Universal motor made in the USA.
    Attached Thumbnails fullsizeoutput_1c20.jpeg   fullsizeoutput_1c23.jpeg   fullsizeoutput_1c26.jpeg   fullsizeoutput_1c29.jpeg   fullsizeoutput_1c2c.jpeg  


    Last edited by Brazcaster; 04-23-2020 at 04:20 PM.
    Brazcaster is offline  

    Posting Rules
    You may not post new threads
    You may not post replies
    You may not post attachments
    You may not edit your posts

    BB code is On
    Smilies are On
    [IMG] code is On
    HTML code is Off
    Trackbacks are Off
    Pingbacks are Off
    Refbacks are Off



    FREE Quilting Newsletter