66-16 electrical problem
12-08-2013, 09:08 AM
#11
Super Member
Join Date: Feb 2012
Posts: 8,091
GreyQ,
There are three thumb nuts holding the wires on the back of the cord block. Once you unscrew the cord block mounting screw you can gently pull the block away from the machine and unscrew only the two thumb nuts holding the controller cord on. The factory made controller cords are color coded so they are easy to put back. Those motor / light wires don't look bad in your pic. If you're careful and don't kink them they should be OK.
Joe
There are three thumb nuts holding the wires on the back of the cord block. Once you unscrew the cord block mounting screw you can gently pull the block away from the machine and unscrew only the two thumb nuts holding the controller cord on. The factory made controller cords are color coded so they are easy to put back. Those motor / light wires don't look bad in your pic. If you're careful and don't kink them they should be OK.
Joe
Thread
Thread Starter
Forum
Replies
Last Post
cabbagepatchkid
For Vintage & Antique Machine Enthusiasts
23
10-19-2017 06:42 PM
Patty55
For Vintage & Antique Machine Enthusiasts
14
08-27-2014 11:05 AM
Dawn227
General Chit-Chat (non-quilting talk)
1
09-20-2011 04:26 AM
