Go Back  Quiltingboard Forums > Main > For Vintage & Antique Machine Enthusiasts
Cleaning and repairing the Shellac clear coat on Vintage sewing machine heads >

Cleaning and repairing the Shellac clear coat on Vintage sewing machine heads

Cleaning and repairing the Shellac clear coat on Vintage sewing machine heads

Old 10-02-2020, 06:15 AM
  #701  
Super Member
Thread Starter
 
Join Date: Mar 2010
Location: Huntsville, AL
Posts: 2,609
Default

Just wipe down the machine with a rag. The sewing machine oil does not have to be removed. Linseed oil is better than sewing machine oil. I use several layers for the pad but i just dip my rag in the shellac with a drop of linseed oil on top. I have been known to cover my finger with a couple of layers of rag(t-shirt) and dip into the shellac and oil. You can do as yutube said, what ever is comfortable for you to polish.
Glenn
Glenn is offline  
Old 10-03-2020, 04:22 AM
  #702  
Member
 
Join Date: Jul 2020
Location: Qld, Australia
Posts: 16
Default

Hi Glenn thanks very much for your advice. I'll have a go and post if the finished results are decent ☺️
Lizz1 is offline  
Old 02-02-2021, 10:45 PM
  #703  
Member
 
Join Date: Feb 2021
Posts: 1
Default Sewing mashine?

i want sewing machine but i don't know which is the best please guide me
sarahkhan is offline  
Old 05-29-2021, 02:28 PM
  #704  
Member
 
Join Date: May 2021
Location: Virginia
Posts: 1
Default

Hello, I'm a VSM newbie here! I have a few questions before embarking on my first sewing machine refinishing. Pictures in a link below. Appreciate any comments/feedback/help you're willing to offer. Thanks, everyone!

I recently acquired a Singer 66 in a treadle cabinet, and hope to restore and sew with it. I'm so glad I stumbled upon Glenn's posts about how to clean and refinish the sewing machine head because I accidentally took some gold off the decals and have been freaking out ever since. Here are some pictures of my new baby:
https://www.quiltingboard.com/member...bums20452.html (Hope the link works, haven't figured out how to upload photos in a post yet...)

I've read and re-read the posts to make sure I've got all the details. I'm collecting supplies right now, and will practice in an inconspicuous part of the machine before doing the whole thing. I have a few more questions, hope they're not too silly to ask.

1. There are a few chips along the edge of the bed that I hope to touch up. Do you think it would be odd to just touch it up with some black paint (the anilene dye alcohol-soluable powder mixture)? Or should I consider filling in the bumpy edge with an auto body filler putty, then paint and finish?

2. Will the step to wipe over the decals with alcohol + linseed oil remove the gold in the decals as it seems alcohol tends to remove the gold layer? Is there an alternative way to wipe over it prior to sealing with shellac?

3. The decals are in relatively good condition, but I would like to touch up the portions where it turned silver due to my mistake. I saw Testor's gold paint pen being recommended. After some googling, I have found one that is enamel-based, and was wondering if it's okay to have enamel being sandwiched between the japanning and shellac layers?
esther.makes is offline  
Old 05-29-2021, 07:24 PM
  #705  
Senior Member
 
redbugsullivan's Avatar
 
Join Date: Jan 2011
Location: Western Washington State
Posts: 548
Default

You ask excellent, educated questions! Yes, be careful with anything that may touch decals. I have found high end nail polish enamel to be an acceptable paint chip fill and color match. Be sure to just fill the loss and let dry. Several layers may be needed.
redbugsullivan is offline  
Old 05-30-2021, 06:03 AM
  #706  
Super Member
 
OurWorkbench's Avatar
 
Join Date: Mar 2015
Location: Denver, CO
Posts: 3,388
Default

I used some Testor's model paint to fill in a scratch and some chips for my sister's machine. Another recommendation is Dupli-Color DE1635 Semi-Gloss. It can be sprayed into the lid or plastic cup and applied with a brush.

Janey - Neat people never make the exciting discoveries I do.
Not affiliated with off-site link(s)
OurWorkbench is offline  
Old 03-06-2022, 04:06 PM
  #707  
Member
 
Join Date: Jan 2016
Location: NW Washington
Posts: 18
Default

Glenn- Skipper-
I read all 71 pages and have some questions. My 1947 Singer 15-91-- has what I'd say are some pretty fine decals and a bit of life's nicks but the black areas on the bed have some serious pitting. It also has what looks like peeling skin after a bad sunburn on the inside area of the pillar. It was like this when I got it years ago. This machine is clean and rewired and well maintained- I really love this machine as we've been partners a long time! Attached are a few photos of the worst areas.

Questions: 1. will your method work to fill these holes- assume I would concentrate there initially and then move on to the entire bed and pillar
2. is this technique temperature sensitive. I'm in NW Washington where now the temperature is in the 40s and our farm shop isn't much over 60 this time of year even with the waste oil heater going! And it rains a lot.

The next thing. I have a 1954 Singer 1200 which some doofas painted the bed with unknown black paint after spraying with a gray primer- only bed was painted. Appears to be a very thin coat of paint. This paint scratches easily with the fingernail and mars very easily as it has a slight tack feeling even after more than a year since acquiring it. I'd like to take the paint/primer all the way off on the bed only . It is obvious they masked the machine off at the base of the pillar as you can see the color is slightly different and there is the telltale edge of the masking tape line. Tiny bit of over-spray on oil caps on the gears underneath. Would the aniline dye method work on a complete bed redo? Or what to paint it with initially? Then proceed with the French polish after paint has cured? The convenient thing is there are no decals on the 1200 bed area!
Attached Thumbnails img_0793.jpg   img_0794.jpg  

Last edited by Annie from Edison; 03-06-2022 at 04:14 PM. Reason: no photos
Annie from Edison is offline  
Old 03-08-2022, 07:53 AM
  #708  
Member
 
Join Date: Feb 2022
Posts: 2
Default detail paint touch ups

Originally Posted by Glenn View Post
After the black finish was to my likeing I took gold paint and repaired the lettering using tape and and an artist fine brush. I am not an artist so bear with me here. After the paint was dry I applied a thin coat of shellac over the decal to protect it using the french polish method. At this point let cure for about a week and wax if desired but it is not needed at this point if you applied a clear coat of shellac over the entire machine. Ok now lets show you the end results of this cleaning of the very nasty machine. To shine the metal parts I used Brasso and a dremel with a cloth buffing pad. Then put it all back together ecept the motor that I will not use. Thanks to Charlee I have a bobbin slide plate to this badged White. Thank you Fiesty. Now ask all the questions you want.


Skipper
Hi Glenn what kind of gold paint do you use and where do you get it from?
Thanks
inchhirn is offline  
Old 03-08-2022, 08:15 AM
  #709  
Super Member
 
OurWorkbench's Avatar
 
Join Date: Mar 2015
Location: Denver, CO
Posts: 3,388
Default

Originally Posted by inchhirn View Post
Hi Glenn what kind of gold paint do you use and where do you get it from?
Thanks
According to Cleaning and repairing the Shellac clear coat on Vintage sewing machine heads he used https://www.testors.com/pages/help-a...store-locator/ which can be found at https://www.testors.com/en/product-c...mel-paint-pens

Janey - Neat people never make the exciting discoveries I do.
Not affiliated with off-site link(s)
OurWorkbench is offline  
Old 03-08-2022, 08:41 AM
  #710  
Super Member
Thread Starter
 
Join Date: Mar 2010
Location: Huntsville, AL
Posts: 2,609
Default

I use Testor gloss gold. You can get it at any hobby shop.
Glenn is offline  
Related Topics
Thread
Thread Starter
Forum
Replies
Last Post
Glenn
For Vintage & Antique Machine Enthusiasts
101
05-03-2020 10:43 PM
smokeythecat
For Vintage & Antique Machine Enthusiasts
3
03-22-2018 11:58 AM
Debbie C
General Chit-Chat (non-quilting talk)
9
04-28-2015 05:58 PM
Redsquirrel
For Vintage & Antique Machine Enthusiasts
3
10-12-2014 09:00 AM
Glenn
For Vintage & Antique Machine Enthusiasts
35
07-03-2014 08:44 PM

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off
Trackbacks are Off
Pingbacks are Off
Refbacks are Off


FREE Quilting Newsletter