Cleaning and repairing the Shellac clear coat on Vintage sewing machine heads
#691
Member
Join Date: Apr 2020
Posts: 5
Actually the Amazon link gives a "Not Found" page, however, I think this page will - https://www.amazon.com/s?k=aniline+d...lcohol+soluble
Janey - Neat people never make the exciting discoveries I do.
Not affiliated with off-site link(s)
#693
Super Member
Thread Starter
Join Date: Mar 2010
Location: Huntsville, AL
Posts: 2,609
It is a matter of experience as you said. I use only water and dish soap by making a stiff foam and wipe down the machine to remove dust and dust on the surface. Not enough water to hurt the decal but you can stay away from them if you are unsure. Then proceed with the tut. This system really works if you take your time.
Glenn
Glenn
#694
Super Member
Join Date: Nov 2011
Location: Southern Minnesota
Posts: 4,362
Just had to give a big thank you to Glenn and Miriam for all the patience they have shown in sharing these techniques with us! Never thought I would go down this road, but I saw Chaly's restoration on another site and was over the moon with her result. Have been reading and rereading these posts to glean as much info as I can get into my brain! Did one machine on my deck last month when the weather was perfect. Still in the final curing phase in the house now. Did a lot more clear coat than linseed oil proportions, but it worked out pretty well. My husband was impressed! Thank you again for sharing your expertise with the rest of us!
Last edited by QuiltnNan; 08-10-2020 at 03:23 AM. Reason: PM
#695
Member
Join Date: Jul 2020
Location: Qld, Australia
Posts: 16
Hi Glenn, newbie here and thanks very much for the instructions. I'm very keen to try this for my old singer handcrank that i've inherited, have cleaned it thoroughly with smo to the best that i can. I'm of course, terrified to ruin the machine, so forgive me asking silly questions. first, use denatured alchol and linseed (as per your earlier instructions above) and WORK ALL OVER THE MACHINE in circular motions, is that right? How many times and how long? is this process also known as french polishing? I tried to do research on youtube and there was no mention of linseed oil? I just want to be sure that i fully understand the whole process before embarking on it. Thanks very very much for your advice.
#696
Super Member
Thread Starter
Join Date: Mar 2010
Location: Huntsville, AL
Posts: 2,609
Yes you are right. Linseed oil and denatured alcohol and applied as directed will smooth out the finish and remove the brown color of aged shellac. Stay away from the decals for the alcohol will silver them. It will take several times to make a smooth surface and then to same using shellac and linseed oil as directed will build up the finish. This is called French polishing. I recommend you practice on an old machine first to get the hang of this. Go slow but have fun.
#697
Member
Join Date: Jul 2020
Location: Qld, Australia
Posts: 16
Thanks very much Glenn. Great advice, I'm on the prowl for a cheap machine to test the french polishing before touching my grand dame. Problem is that here in Australia, even a totally rusted piece of junk without the machinery has a min asking price from $50 upwards,Plus, I need to get all my stuffs ready just in case we go into lockdown again (which is looking very likely)
Cheers
Cheers
#698
Member
Join Date: Jul 2020
Location: Qld, Australia
Posts: 16
Hi Glenn, Following from my response, I got my hands on an old machine to try the french polishing. it is in a really sad state. Parts of the shellac surface is peeling (see image)and showing the cast iron body. Would french polishing 'cover' over these patches? BTW, do you have any idea what machine this is, the treadle has the word VALLEY and there is a very faint residual print of 'THE VALLEY R G' on the body which is where the chipped japaning is. There is a serial number K1833482 under the base. Thanks much
Last edited by Lizz1; 09-06-2020 at 05:10 AM. Reason: typo correction
#700
Member
Join Date: Jul 2020
Location: Qld, Australia
Posts: 16
Gday Glenn
So, I've finally managed to line all my ducks in a row (read...manage to get everything I need for this french polishing adventure)
It's really hard to get the Zinsser shellac so finally, after numerous trips to hardware stores where it is only available in spray can, have opted to mix my own with shellac flakes As per your first post, to ask all the questions before starting. So please forgive my newbie ignorant questions. BTW, I saw the same machine on sale on Facebook and its a Vesta "Valley" Thanks
1. Do i need to wipe away the sewing machine oil first before i start french polishing? I don't have naptha, but using JELL (Aussie equiv of Swarfega, can't get Goop or Gojo) Should I use that to wipe away all traces of SMO first>
2. Is the linseed oil a must? Or can i use SMO in its place?
3. I watched Youtube videos to get a better idea of how to do and they always make a "rubbing pad" with tshirt. Do you recommend that?
4. Also on Youtube, they replenish by opening up the pad to add shellac and alcohol...your thoughts please?
5. How many layers do you recommend?
Apologies for all the questions, but really want to understand the whole process in my head before i dive in.
Grateful thanks for your time and advice.
Cheers
So, I've finally managed to line all my ducks in a row (read...manage to get everything I need for this french polishing adventure)
It's really hard to get the Zinsser shellac so finally, after numerous trips to hardware stores where it is only available in spray can, have opted to mix my own with shellac flakes As per your first post, to ask all the questions before starting. So please forgive my newbie ignorant questions. BTW, I saw the same machine on sale on Facebook and its a Vesta "Valley" Thanks
1. Do i need to wipe away the sewing machine oil first before i start french polishing? I don't have naptha, but using JELL (Aussie equiv of Swarfega, can't get Goop or Gojo) Should I use that to wipe away all traces of SMO first>
2. Is the linseed oil a must? Or can i use SMO in its place?
3. I watched Youtube videos to get a better idea of how to do and they always make a "rubbing pad" with tshirt. Do you recommend that?
4. Also on Youtube, they replenish by opening up the pad to add shellac and alcohol...your thoughts please?
5. How many layers do you recommend?
Apologies for all the questions, but really want to understand the whole process in my head before i dive in.
Grateful thanks for your time and advice.
Cheers
Thread
Thread Starter
Forum
Replies
Last Post
Glenn
For Vintage & Antique Machine Enthusiasts
105
06-17-2023 07:05 AM
smokeythecat
For Vintage & Antique Machine Enthusiasts
3
03-22-2018 11:58 AM
Redsquirrel
For Vintage & Antique Machine Enthusiasts
3
10-12-2014 09:00 AM
Glenn
For Vintage & Antique Machine Enthusiasts
35
07-03-2014 08:44 PM