Frister-Rossmann Hand crank
#11
#12
Super Member
Join Date: Sep 2015
Posts: 1,963
![Default](/images/icons/icon1.gif)
The closest I could find was this manual. I'm gessing your machien was made around 1900 to 1910, but I'm not an expert at all. I found something on this page too. The winder is a bit different, but the slide plate and transverse shutle is very similar. It's not often the decals and lacquer is in this good condition on the old machines. It's a find and this good condition hardly ever turns up unless you start collecting and keep your eyes out for years and years. These type of decals could be found up until the 1920s and even into the 30s, but gradually simpler and simpler. I could not make sense of the serial number. WWII sat a complete stopper for these type of machines, but by then other models with improvements and different design had long taken over.
It looks like the accessories is for a different machine, I can spot a side clamping screw on your machine and the accessories have a different fitting. The larger attachments looks very intersting, is at a zigagger?
It looks like the accessories is for a different machine, I can spot a side clamping screw on your machine and the accessories have a different fitting. The larger attachments looks very intersting, is at a zigagger?
Last edited by Mickey2; 12-02-2017 at 04:25 PM.
#14
Super Member
Thread Starter
Join Date: May 2010
Location: Southeast Idaho
Posts: 3,207
![Default](/images/icons/icon1.gif)
The closest I could find was this manual. I'm gessing your machien was made around 1900 to 1910, but I'm not an expert at all. I found something on this page too. The winder is a bit different, but the slide plate and transverse shutle is very similar. It's not often the decals and lacquer is in this good condition on the old machines. It's a find and this good condition hardly ever turns up unless you start collecting and keep your eyes out for years and years. These type of decals could be found up until the 1920s and even into the 30s, but gradually simpler and simpler. I could not make sense of the serial number. WWII sat a complete stopper for these type of machines, but by then other models with improvements and different design had long taken over.
It looks like the accessories is for a different machine, I can spot a side clamping screw on your machine and the accessories have a different fitting. The larger attachments looks very interesting, is at a zigagger?
It looks like the accessories is for a different machine, I can spot a side clamping screw on your machine and the accessories have a different fitting. The larger attachments looks very interesting, is at a zigagger?
#15
Super Member
Thread Starter
Join Date: May 2010
Location: Southeast Idaho
Posts: 3,207
![Default](/images/icons/icon1.gif)
Leonf.. I have not discovered a far left slide to see if there is a shuttle and bobbin. :-( There is a large 'K' that you can see in my second picture that is on the inside of the larger side on the right. Is that called the pillar? I feel like I am in uncharted territory with this machine.
#20
Super Member
Join Date: Sep 2015
Posts: 1,963
![Default](/images/icons/icon1.gif)
Yours are in exceptional shape too Glenn. The ones I come across have a two millimeter layer of so called patina (grime and dirt), decals are sort of a guess of what they might have been. Yellow lillies with art nouveau swirly lines. I was once in an Austrian appartment building, and they stain glass windows and hall way were elegantly decorated with similar style ornaments, but still on the simple side, nothing excessivly.
Thread
Thread Starter
Forum
Replies
Last Post
kch1983
For Vintage & Antique Machine Enthusiasts
4
06-14-2017 07:16 AM
Glenn
For Vintage & Antique Machine Enthusiasts
13
05-02-2014 02:07 PM
Dollyo
For Vintage & Antique Machine Enthusiasts
13
04-02-2014 07:32 AM
Cecilia S.
For Vintage & Antique Machine Enthusiasts
16
10-16-2013 05:37 AM