GE Model A "Pre-Featherweight"
#1
Banned
Thread Starter
Join Date: Oct 2012
Location: San Lorenzo, CA
Posts: 5,361
GE Model A "Pre-Featherweight"
Hey folks, here is the GE Model A that we just picked up for $40.
Research shows that a run of 5000 of these machines were made between 1931-1936
There are three "versions" early made by Standard/Osann, late made by Standard//Osann, and after mid 34 (made by Singer)
Mine seems to be in the middle group, after the bed was made of aluminum, but before Singer bought the company and made the Featherweight based on it.
[ATTACH=CONFIG]390359[/ATTACH]
[ATTACH=CONFIG]390360[/ATTACH]
[ATTACH=CONFIG]390361[/ATTACH]
[ATTACH=CONFIG]390362[/ATTACH]
[ATTACH=CONFIG]390363[/ATTACH]
[ATTACH=CONFIG]390364[/ATTACH]
[ATTACH=CONFIG]390365[/ATTACH]
[ATTACH=CONFIG]390366[/ATTACH]
[ATTACH=CONFIG]390367[/ATTACH]
[ATTACH=CONFIG]390368[/ATTACH]
Research shows that a run of 5000 of these machines were made between 1931-1936
There are three "versions" early made by Standard/Osann, late made by Standard//Osann, and after mid 34 (made by Singer)
Mine seems to be in the middle group, after the bed was made of aluminum, but before Singer bought the company and made the Featherweight based on it.
[ATTACH=CONFIG]390359[/ATTACH]
[ATTACH=CONFIG]390360[/ATTACH]
[ATTACH=CONFIG]390361[/ATTACH]
[ATTACH=CONFIG]390362[/ATTACH]
[ATTACH=CONFIG]390363[/ATTACH]
[ATTACH=CONFIG]390364[/ATTACH]
[ATTACH=CONFIG]390365[/ATTACH]
[ATTACH=CONFIG]390366[/ATTACH]
[ATTACH=CONFIG]390367[/ATTACH]
[ATTACH=CONFIG]390368[/ATTACH]
#6
Banned
Thread Starter
Join Date: Oct 2012
Location: San Lorenzo, CA
Posts: 5,361
We are missing the foot pedal at this point. I may wire something up tonight be be able to test it.
Needs a good cleaning first though.
here are a couple more shots.
The place where the foot pedal should go
[ATTACH=CONFIG]390372[/ATTACH]
The place where the power goes
[ATTACH=CONFIG]390373[/ATTACH]
The underside
[ATTACH=CONFIG]390374[/ATTACH]
History of these machines.
http://books.google.com/books?id=0Uq...ed=0CDAQ6AEwAA
Needs a good cleaning first though.
here are a couple more shots.
The place where the foot pedal should go
[ATTACH=CONFIG]390372[/ATTACH]
The place where the power goes
[ATTACH=CONFIG]390373[/ATTACH]
The underside
[ATTACH=CONFIG]390374[/ATTACH]
History of these machines.
http://books.google.com/books?id=0Uq...ed=0CDAQ6AEwAA
Last edited by QuiltnNan; 01-27-2013 at 08:24 AM. Reason: replace copyright material with link
Thread
Thread Starter
Forum
Replies
Last Post
bearisgray
General Chit-Chat (non-quilting talk)
65
02-01-2024 09:04 AM
SusanSusan33
Main
7
05-07-2014 11:25 AM