Need help with wiring
#1
Junior Member
Thread Starter
Join Date: Apr 2011
Location: Kansas
Posts: 102
Need help with wiring
I am adopting a blue Precision deluxe (15 clone) machine. It is in great condition but the wires to the machine and controller have been cut and not present. I need information on how to redo the wiring. Also, it doesn't have a light so I will need to get one and wire it also. It doesn't have it's case so I will either find one of put it into one of my Singer cabinets if it will fit. Any help will be greatly appreciated.
Thanks,
Barb
Thanks,
Barb
#2
Super Member
Join Date: Feb 2012
Posts: 8,091
Barb,
Go to Sew-Classic and look at the lighting section: { http://www.shop.sew-classic.com/Lights-Bulbs_c11.htm }
You can use either the third or fourth light down in the center row depending on weather or not your machine has the cut out for the light behind the inspection plate.
Also for a new wiring block look here; { http://www.shop.sew-classic.com/Univ...d-Wire_c50.htm }
You'll need the center cord block assembly in the first row.
As for the case I can't help there, but it will fit in a standard Singer cabinet.
Joe
Go to Sew-Classic and look at the lighting section: { http://www.shop.sew-classic.com/Lights-Bulbs_c11.htm }
You can use either the third or fourth light down in the center row depending on weather or not your machine has the cut out for the light behind the inspection plate.
Also for a new wiring block look here; { http://www.shop.sew-classic.com/Univ...d-Wire_c50.htm }
You'll need the center cord block assembly in the first row.
As for the case I can't help there, but it will fit in a standard Singer cabinet.
Joe
Thread
Thread Starter
Forum
Replies
Last Post
NopahDesertRat
For Vintage & Antique Machine Enthusiasts
10
08-13-2013 12:15 AM
Stitch124
For Vintage & Antique Machine Enthusiasts
22
10-16-2012 04:56 AM
quilt addict
For Vintage & Antique Machine Enthusiasts
4
08-24-2010 07:42 PM