the New Home is home!
#1
the New Home is home!
Got worried as the packing wasn't as good as it could have been - machine was able to roll side to side inside the box, but at least that was the only problem so it did survive. I wish sellers would realize - if the machine can move inside the box - it WILL move inside the box.
The needle clamp did work itself free, but I found it in the packing after checking the listing and making sure it was suppose to be there.
It's a small machine - at least compared to the Singers, very nice lines. And the best part, my goofy feet will fit! When I pulled off the top clamp, the bar is machined done to a quite narrow end. I have several feet with a small hole like that -
I'll take pictures later - need to get back to work, but I'm so excited I had to share.
The needle clamp did work itself free, but I found it in the packing after checking the listing and making sure it was suppose to be there.
It's a small machine - at least compared to the Singers, very nice lines. And the best part, my goofy feet will fit! When I pulled off the top clamp, the bar is machined done to a quite narrow end. I have several feet with a small hole like that -
I'll take pictures later - need to get back to work, but I'm so excited I had to share.
Last edited by Macybaby; 01-13-2014 at 12:09 PM.
#6
Here she is!
Very slim - makes the Red Eye seem overweight.
This is a full size machine, only seems small compared to the others.
Here she is with a 3/4 size Standard machine - it has an extension on the end so makes the bed seem longer
Very slim - makes the Red Eye seem overweight.
This is a full size machine, only seems small compared to the others.
Here she is with a 3/4 size Standard machine - it has an extension on the end so makes the bed seem longer
#8
And with her attachments.
I have two more boxes, but they are partial sets that are the same as what I've got here - these are five different types, though not all the sets are complete. And some of them have a mixture of pieces that I've got to correct.
One of the things unique about the New Home is this cut down presser bar - if you know of a machine other than a New Home with this - please let me know.
I have two more boxes, but they are partial sets that are the same as what I've got here - these are five different types, though not all the sets are complete. And some of them have a mixture of pieces that I've got to correct.
One of the things unique about the New Home is this cut down presser bar - if you know of a machine other than a New Home with this - please let me know.
#10
Senior Member
Join Date: Sep 2012
Location: Delavan
Posts: 468
great looking machines. I have another for you. if you are interested... I can pick up. just less than an hour south. the SM is a 306K. they sent me a pic with that number.
http://rockford.craigslist.org/hsh/4265036388.html
they keep popping up down or should I say over here.
http://rockford.craigslist.org/hsh/4265036388.html
they keep popping up down or should I say over here.
Thread
Thread Starter
Forum
Replies
Last Post
lpsewing
Main
10
03-06-2012 09:52 AM