Plastic vs. metal bobbins for old machines
#21
Super Member
Join Date: Feb 2010
Location: Maryland
Posts: 3,586
Originally Posted by katyquilter
I'm about to try a plastic bobbin in my 99K which I recently purchased at a thrift store. It came with one metal bobbin and I bought the metal 66 bobbins which should work. they fit but do not work - the machine refuses to sew, it's as if the bobbin is just a hair too tight. So someone suggested plastic. I'm going to have to get some to try soon unless someone has a better suggestion.
#22
http://www.singermachines.co.uk/sing...-metal-66k.htm These are the ones I always use with no problems.
#24
Junior Member
Join Date: Dec 2010
Location: Georgia
Posts: 253
This is very interesting. I have an old Brother 8200 sewing/embroidery machine that I bought from a great dealer in Kentucky. We now live in Ga. Wanting new bobbins I went to the local dealer, of course wanting metal bobbins. I was promptly told I shouldn't be using metal bobbins, I should be using plastic! If that's the case, then why did the machine come right out of the box, unopened box, with metal bobbins?
So, I called the dealer I bought it from, they had never heard anything about not using metal bobbins in that machine. Now this is just my opinion since I'm still confussed over this issue, I prefer the metal bobbins. They don't seem to jump as much as plastic. I've also had some platic bobbins end up with little sharp edges that tear the thread.
Maybe it's just a personal prefernce. I'll certainly be reading to see what answers are posted.
So, I called the dealer I bought it from, they had never heard anything about not using metal bobbins in that machine. Now this is just my opinion since I'm still confussed over this issue, I prefer the metal bobbins. They don't seem to jump as much as plastic. I've also had some platic bobbins end up with little sharp edges that tear the thread.
Maybe it's just a personal prefernce. I'll certainly be reading to see what answers are posted.
#25
Originally Posted by virtualbernie
Originally Posted by katyquilter
I'm about to try a plastic bobbin in my 99K which I recently purchased at a thrift store. It came with one metal bobbin and I bought the metal 66 bobbins which should work. they fit but do not work - the machine refuses to sew, it's as if the bobbin is just a hair too tight. So someone suggested plastic. I'm going to have to get some to try soon unless someone has a better suggestion.
#26
Super Member
Join Date: Jun 2011
Location: near Peoria Illinois
Posts: 1,638
I used what I could to find out what bobbin one of my machines needed.
I had to go buy different plastic ones for the Singer Fashion Mate of the 1980's. It didn't like the metal ones from my Kenmore (1972), or the plastic ones of my Viking Rose, or Pfaff Expressions 3.0.
I have a new (to me) Singer 15-91 that I'm still trying to please completely. so far it likes the metal for my Kenmore's the best.
I had to go buy different plastic ones for the Singer Fashion Mate of the 1980's. It didn't like the metal ones from my Kenmore (1972), or the plastic ones of my Viking Rose, or Pfaff Expressions 3.0.
I have a new (to me) Singer 15-91 that I'm still trying to please completely. so far it likes the metal for my Kenmore's the best.
#28
My vintage machines all use metal bobbins except for the Singer 338. It uses a plastic one that I thought was a class 66....wrong. There is just a slight difference but enough for it not to sew properly. I have Janomes, Berninas, Singers, etc. that all use different bobbins so I have a clear bobbin box for each, clearly labeled and make sure they don't get mixed up.
#30
I tried putting a plastic one in my 1914 year Red Eye with a back clamp. It jiggled around in there too much.
uote=Candace]I've been told to use metal bobbins in my vintage machines that have metal bobbin cases and the plastic in newer machines with plastic cases. Basically use what was supposed to go in there when they were made.
I do only use the metal bobbins in my vintage machines, but am seeing more and more vintage machines sold with plastic bobbins in them. I'm just wondering why? I've been told using the plastic in metal cases can affect tension and cause problems. With both plastic and metal still so readily available, why would someone put plastic bobbins in these old machines?[/quote]
uote=Candace]I've been told to use metal bobbins in my vintage machines that have metal bobbin cases and the plastic in newer machines with plastic cases. Basically use what was supposed to go in there when they were made.
I do only use the metal bobbins in my vintage machines, but am seeing more and more vintage machines sold with plastic bobbins in them. I'm just wondering why? I've been told using the plastic in metal cases can affect tension and cause problems. With both plastic and metal still so readily available, why would someone put plastic bobbins in these old machines?[/quote]
Thread
Thread Starter
Forum
Replies
Last Post