|
Originally Posted by redmadder
Ya'll think this was as weird and uncomfortable as I did?
|
Originally Posted by Quilt Mom
Originally Posted by redmadder
Ya'll think this was as weird and uncomfortable as I did?
|
Originally Posted by quiltdoctor
I've been busy this past weekend. Our 100 member quilt guild had its quilt show. Last Friday I worked 8 hours helping set up, then volunteered at the show Saturday and Sunday, and helped with take down. It is a tremendous amount of work to put on a show. My hat is off to anyone who has ever been the Chairperson for an event like that. I was just one little committee person. Lots of beautiful quilts. I'm hoping for the next show, that I can have a roped off area and display some of my antique Iron Ladies. It won't be for 2 years. I did get a Blue Ribbon in my division, so I was a happy quilter.
Texas Jan OK, I confess (raising hand!!) I'm the chair for our guild's quilt show in January 2012. But I have tons of help, and I was very involved the last 2 shows, so I am pretty confident we'll do OK. :shock: |
Question???
Will the bobbin winder from my dead Singer 99 fit a FW? If so Hershey, don't tell mom I want to surprise her. |
Originally Posted by Glenn
Congrats on your blue ribbon. We are proud of you.
Glenn |
Originally Posted by miriam
Moving on to my next problem child machine. I have a 15 clone. Some times it goes 1 or 2 stitches and snaps the thread then if I'm lucky it will go 3 inches and snap. SO I re-threaded left to right and right to left... which ever - one of them doesn't work. Then I played with the upper threading - I think I've had everything right from the start. I put in a new needle - experimented with which way it goes. I had it right. I played with the tension. Then I swapped a face plate off another machine. It is not tension. It is not threading. It is not the needle. Then I took out the bobbin hook. I polished it with a crumpled up piece of aluminum foil just to make sure there aren't any burrs. Still snaps thread. I took off the presser foot. The needle does not hit the plate but it comes close. That needle hole looks like a star from all the needle hitting going on. I'm wondering if it is tearing up the thread at that spot. I can't seem to see it happen. I left my long screw driver at the shop and the screw is in too tight to get with a skinny little Susy Homemaker screw driver. I was thinking maybe pull the plate and swap it out with the other clone or maybe polish it up a bit - stuck until I come up with some other brilliant idea. The Singer manual I found on line does not match my machine. I wonder if I need a service manual to figure out how to center the needle a bit better in the hole. That needle all but hits the hole.
|
Originally Posted by miriam
Originally Posted by quiltdoctor
Originally Posted by Charlee
That's terrific Jan! Congrats on the ribbon, are you going to post pics? :)
Texas Jan |
Originally Posted by jljack
Originally Posted by miriam
Moving on to my next problem child machine. I have a 15 clone. Some times it goes 1 or 2 stitches and snaps the thread then if I'm lucky it will go 3 inches and snap. SO I re-threaded left to right and right to left... which ever - one of them doesn't work. Then I played with the upper threading - I think I've had everything right from the start. I put in a new needle - experimented with which way it goes. I had it right. I played with the tension. Then I swapped a face plate off another machine. It is not tension. It is not threading. It is not the needle. Then I took out the bobbin hook. I polished it with a crumpled up piece of aluminum foil just to make sure there aren't any burrs. Still snaps thread. I took off the presser foot. The needle does not hit the plate but it comes close. That needle hole looks like a star from all the needle hitting going on. I'm wondering if it is tearing up the thread at that spot. I can't seem to see it happen. I left my long screw driver at the shop and the screw is in too tight to get with a skinny little Susy Homemaker screw driver. I was thinking maybe pull the plate and swap it out with the other clone or maybe polish it up a bit - stuck until I come up with some other brilliant idea. The Singer manual I found on line does not match my machine. I wonder if I need a service manual to figure out how to center the needle a bit better in the hole. That needle all but hits the hole.
It even has motor info. I found the adjustment hole and am waiting for DH to come home. I found a screw driver to fit the space. I cut my finger tip pretty bad - it sure did bleed. Bummed out for working on anything for a few days though. |
Originally Posted by tropit
Originally Posted by miriam
Originally Posted by tropit
Originally Posted by miriam
Originally Posted by Charlee
Originally Posted by miriam
Originally Posted by tropit
Sorry...I realize that Blilly would like us to post about earlier machines, but this one is on the cusp and has piqued my curiosity. I hope that you don't mind.
~ Cindy I love the color of that machine! Don't know a thing about it, but I like it! :) ~ Cindy |
Miriam!! YUCK!! Cuts hurt so bad!! Thanks for that link. Besides my 15 clone, someone gave me a DOA 15 that my DH wants to practice working on. He wants to see if he can get it to move...it's frozen stiff right now. I call it bait to reel him into loving the machines as much as I do!! :thumbup: :lol:
Still patiently waiting for my Davis VF to arrive....I am counting the days!! :-) |
| All times are GMT -8. The time now is 01:28 PM. |