Mickey2

Model 15 is a favorite for FMQ, but you should not disregard the vertical bobbin machines. Over the years I have seen several individuals dedicating a 201 to FMQ, and doing fine work. My guess it's all about getting tension and handmovements right. On the web I have seen people set up model 66 for various quilting work, removing the feed dogs since they don't drop; fames, FMQ, with modern quilting feet. Someone I know swear her Pfaff 30 compares favorably to any machine, 130 too. Flatbed models in cabinets have their advantages, but I have seen some quilt on their freearm model and never even thought about getting a different machine for the job. Part of the job is to get to know a particular machine, and I'm sure the machines you already have a ideal for the purpose.

ebell

Perhaps you can help me with the difficulties that I'm having with my 15-125 when I try to FMQ? It seems to tangle at the needle. I test the tension before I drop the feed dogs, and it stitches beautifully. When I try to FMQ, it works fine for a little, then tangles at the needle. I have the stitch length set to zero. I am not sure what I am doing wrong. Any suggestions?

ebell

Thank you Mickey. I am trying out 3 machines at the moment, to see which I like the best for FMQuilting. I am currently liking the 201-2 as I am having difficulty with my 15-125. The thread tangles after a bit. I am not sure what I am doing wrong. I have threaded it correctly for a normal straight stitch, test it out, then drop the feed dogs, and move the stitch length to the zero mark. Is there something that I'm missing?

Mickey2

Im not sure really, basic things to check can be taking the tensioner appart to clean it, making sure there's nothing wrong with the needle, burr in the needle plate, cleaning the bobbin case, race and hook,... I have had issues with bargain thread a few times (bumps and unevenness in the thread and snapping). When you have lowered the feed dogs, the stitch length position should not matter. If the machines are newly required and they have been in storage for a while, it can be worth it to oil them tentatively the next few days, spending some time detecting all oil points, maybe checking and greasing the worm gear behind the hand wheel.

Irishrose2

I have the Westalee slant shank ruler foot for my 301 and I do not have to remove any thread guides.

ebell

Mickey: I've done all the basic things. I collect and restore machines as a hobby, so the machine is in good working order. It is a newish machine for me though, so wondering if I am not doing something right. I always find it is probably user error when something goes wrong, especially since it has a lovely stitch when in normal straight stitch mode.

ebell

I just bought the Westalee for my low shank machines. It fits perfectly. There is enough room underneath to move the quilt sandwich. I am thrilled. I can use it on my 201-2. I just need to figure out why my 15-125 is not doing FM quilting properly.

KalamaQuilts

welcome to the board ebell. Never let it be said we are not a bunch of enablers here Happy quilting!