Respond if you have a Singer 15-91
01-23-2019, 05:50 PM
#121
Junior Member
Join Date: Dec 2018
Location: Havelock NC
Posts: 187
I really think the fabric choice was too much to actually sew that many stitches. The owners manual said it could. I said holly beer watch this. I don’t think the feed was fast enough for the fabric. I’m not practical at free quilting. I have been pretty practiced at free sewing because I thought those silly 3116 machines were not capable
01-23-2019, 08:50 PM
#122
Banned
Join Date: Aug 2014
Location: Victorian Sweatshop Forum
Posts: 4,096
Originally Posted by Dougstermd
Grabbed my 1941/42 15-91 and my wife had a fit I was buying another sewing machine. I told her I was going to flip it and make some cash. I finally got it sewing with an aftermarket bobbin case and reposition/ slash installing the bobbin race corectly. I told her it was a $600 dollar machine. She put it on the classifieds for $400 I really hope she won’t find a buyer.
The owners manual says it’s capable of 30 stitches per inch. I can’t get it to do that with out a tangle. It’s golden at 8
The owners manual says it’s capable of 30 stitches per inch. I can’t get it to do that with out a tangle. It’s golden at 8
Cari
01-24-2019, 02:03 PM
#123
Junior Member
Join Date: Dec 2018
Location: Havelock NC
Posts: 187
Originally Posted by Cari-in-Oly
Sorry to say she probably won't. $400 is a pretty lofty goal for such a common machine.
Cari
Cari
01-24-2019, 02:39 PM
#124
Junior Member
Join Date: Dec 2018
Location: Havelock NC
Posts: 187
Originally Posted by Mickey2
Tangle? Something needs sorting out. It should stitch trouble free in all stitch length settings, the only thing you need to be careful of is limiting amount of stitches at zero. I would take a second look at each link from the stitch length lever to the feed dog mechanism. If one is sluggish or frozen the machine will run and stitch but it can interfere with stitch length and feed. The next thing to check would be threading and make sure there's a good match of needle size and thread weight to the fabric. Don't forget to work on getting the tension right on both bobbin case and upper tension mechanism. Double check the bobbin case too, new repacement parts are known to be of varying quality. A good 15 case should be relatively easy too find. A 15-91 tends to be a keeper for many because of the potted motor and CB hook and race, there are a few old straight stitchers well worth a second look though.
I've been accused of doing the opposite. "Why did you sell that so cheap?" To get it out of here of course.
01-26-2019, 03:52 PM
#126
Junior Member
Join Date: Dec 2018
Location: Havelock NC
Posts: 187
Winner winner chicken dinner. I don’t have to sell it if I don’t have a buyer.
I need to quit tinkering with machines a do more sewing. I have a friend retiring from the US Navy in April he saw my Facebook post about the machines I acquired and he said... make me a quilt. I never made a quilt. I want to make one for his retirement present. I want to make something for actually covering up and getting warm. Those quilting people are really adamant that a large quilt is very difficult to make.
I need to quit tinkering with machines a do more sewing. I have a friend retiring from the US Navy in April he saw my Facebook post about the machines I acquired and he said... make me a quilt. I never made a quilt. I want to make one for his retirement present. I want to make something for actually covering up and getting warm. Those quilting people are really adamant that a large quilt is very difficult to make.
01-26-2019, 06:51 PM
#127
Banned
Join Date: Aug 2014
Location: Victorian Sweatshop Forum
Posts: 4,096
Depending on the pattern you choose a large quilt may not be especially hard per se, but a large quilt can be daunting for a beginner. I've been quilting for 10 years, sewing for over 40 years, and I've just finished my largest quilt to date. A slightly over size double.
.[ATTACH=CONFIG]607426[/ATTACH]
Cari
.[ATTACH=CONFIG]607426[/ATTACH]
Cari
01-27-2019, 07:12 AM
#128
Super Member
Join Date: Mar 2016
Posts: 2,821
Originally Posted by Dougstermd
Those quilting people are really adamant that a large quilt is very difficult to make.
They are:
Simple design - Using large pieces with straight edges is easier to do well. Complicated, small or bias cut pieces are harder to do and take longer.
Not too big - If it's a really large quilt, you are less likely to finish it, and it's harder to manage at the machine. Also, it's very difficult to quilt on a domestic machine and might require sending out to a longarmer.
Use a pattern - You know how much fabric to buy, how many colors you'll need and have instructions on putting it together, so you don't have as many errors.
That's basically what people are trying to tell you.
01-28-2019, 11:56 AM
#129
Power Poster
Join Date: Jan 2009
Location: Reno, Nv
Posts: 16,518
I have my mother's that I remember seeing under the Christmas tree in the early fifties. It is in a wooden rounded top caring case and has every foot imaginable. When mom passed it came to live with me and has always been stored since then. I tried to pass it on to one of my siblings, but, no takers. I will always keep it in the family. These machines are a wonderful workhorse. I went on line to download a manual since it was missing and I found a site that ages the machine by the serial number of where and when it was made. This one is from 1954 and was made in portsmith, ms.
01-28-2019, 06:53 PM
#130
Banned
Join Date: Aug 2014
Location: Victorian Sweatshop Forum
Posts: 4,096
Originally Posted by RedGarnet222
I went on line to download a manual since it was missing and I found a site that ages the machine by the serial number of where and when it was made. This one is from 1954 and was made in portsmith, ms.
Cari
Thread
Thread Starter
Forum
Replies
Last Post
