Singer treadle saved from the dumpster
#1
Member
Thread Starter
Join Date: Jan 2018
Location: America's Roller Coast, Vacationland, USA
Posts: 16
Singer treadle saved from the dumpster
Can you believe someone would put this in a dumpster??? Looks and sews great!!!
[ATTACH=CONFIG]592509[/ATTACH]
[ATTACH=CONFIG]592510[/ATTACH]
[ATTACH=CONFIG]592509[/ATTACH]
[ATTACH=CONFIG]592510[/ATTACH]
#2
Super Member
Join Date: Sep 2015
Posts: 1,963
I know people have picked up all kinds of very expensive and valuable items from the dumpster, so I should't be too surpised. A nice 66 like that should in theory be easy to sell, it's a very early production (just after 1900) because of the back clamp foot. The red eye decals are very sought after by some and on yours they are in good condition. Be careful with them when you clean. There is a lady who sells a converter for the back clamp presser bar, and it will take the basic side clamp feet too. The machine might shine up further, and if there's sign of flaking it's often best not use sewing machine oil, but something else when you clean and polish it up. Oil can seep under there and give a sort of brownish opaque staining.
I don't know how used you are to get and old sewing machine back into shape, but very often you have to detect all the oil points, take off all plates and cover, clean under the bobbin case and around the feed dogs. Oil daily and do a bit of test sewing, even when you think it runs fine, it takes time to flush out sticky grime from the inners of joints and hinges. The stitch length knob should be oiled too, a drop on the threading and turn it in and out a few times. When oiling and test stitching you might as well keep it on maximum stitch length.
Best of luck :- )
I don't know how used you are to get and old sewing machine back into shape, but very often you have to detect all the oil points, take off all plates and cover, clean under the bobbin case and around the feed dogs. Oil daily and do a bit of test sewing, even when you think it runs fine, it takes time to flush out sticky grime from the inners of joints and hinges. The stitch length knob should be oiled too, a drop on the threading and turn it in and out a few times. When oiling and test stitching you might as well keep it on maximum stitch length.
Best of luck :- )
#10
Member
Thread Starter
Join Date: Jan 2018
Location: America's Roller Coast, Vacationland, USA
Posts: 16
My brother called me one day and told me some friends of his were going to put an old treadle sewing machine in the dumpster and did I want it. He knows I collect vintage sewing machines. He loaded it up and put it in his garage. I went, expecting to see a piece of junk but instead it was in extremely good condition. The decals are in great condition. I think the cabinet may been refinished at some point because the finish on the wood is so nice. It even still had the leather belt on it. Brought it home, oiled it and wiped it down and it sews a beautiful straight stitch. According to the serial number it was made in 1919-1920. As they say, one man's junk is another man's treasure.
Thread
Thread Starter
Forum
Replies
Last Post
debbieoh
For Vintage & Antique Machine Enthusiasts
46
06-06-2013 03:29 PM
grammatjr
For Vintage & Antique Machine Enthusiasts
50
02-20-2012 04:43 PM