Vintage Sewing Machine Shop.....Come on in and sit a spell
Oh, and this machine, the Alto, is controlled by the use of hands pushing down on the base, area by the foot and needle, for speed of sewing. I love her comment as to how so many folks just get lost by threading a machine, which is why she design this with a very simple threading path to the needle. I don't have difficultly following a path for threading, but I do understand this statement since many of my vintage machines thread so differently from each other.
I'm off to my other projects. Hope all is well for everyone. Enjoy!
I'm off to my other projects. Hope all is well for everyone. Enjoy!
Last edited by vintagemotif; 01-08-2013 at 08:04 AM.
Power Poster
Join Date: Mar 2011
Location: Somewhere
Posts: 15,506
Oh, and this machine, the Alto, is controlled by the use of hands pushing down on the base, area by the foot and needle, for speed of sewing. I love her comment as to how so many folks just get lost by threading a machine, which is why she design this with a very simple threading path to the needle. I don't have difficultly following a path for threading, but I do understand this statement since many of my vintage machines thread so differently from each other.
I'm off to my other projects. Hope all is well for everyone. Enjoy!
I'm off to my other projects. Hope all is well for everyone. Enjoy!
Super Member
Join Date: Feb 2012
Posts: 8,091
Miriam,
Here's a thread from the Artisans Square forum about it. Has a pic and some links too.
{ http://artisanssquare.com/sg/index.p...c,19406.0.html }
Joe
Here's a thread from the Artisans Square forum about it. Has a pic and some links too.
{ http://artisanssquare.com/sg/index.p...c,19406.0.html }
Joe
Banned
Join Date: Oct 2012
Location: San Lorenzo, CA
Posts: 5,361
THANKS Joe... now I have ANOTHER machine to look for(acquire)... a Freia.
http://www.ebay.de/itm/DDR-Kult-Reisenahmaschine-FREIA-Bakelit-selten-DDR-sewing-machine-rare-/300840132649?pt=DDR_Ostalgie&hash=item460b782029#h t_1062wt_132
http://www.ebay.de/itm/DDR-Kult-Reisenahmaschine-FREIA-Bakelit-selten-DDR-sewing-machine-rare-/300840132649?pt=DDR_Ostalgie&hash=item460b782029#h t_1062wt_132
Last edited by SteveH; 01-08-2013 at 01:31 PM.
Power Poster
Join Date: Mar 2011
Location: Somewhere
Posts: 15,506
Hi Nancy. You are right. I put it in the cabinet last night and I think it looks fantastic.
[ATTACH=CONFIG]386609[/ATTACH]
It fits in the opening, the hinges line up and it clears the drawer and sides but I think that the feet cast into the bottom of the machine prevent it from going all of the way down into the cabinet opening, thus preventing the top from closing. HOWEVER, if the motor was removed (not needed) and the block of wood that is screwed to the inside of the lid were to be removed, it WILL FIT and close properly.
As to the poor old 66, the old gal has seen better days and the cabinet is worthy of a nicer machine. The bed has been repainted, decals are mostly gone as is the Singer name. The chrome is bad on the entire machine. Including the faceplate, back plate, and footplate. The slide is missing too. I think she might be a parts machine or a repaint project.
[ATTACH=CONFIG]386611[/ATTACH]
I do have a question about the 66 head though. I read that the Singer machines made before 1901 did not have the motor lug cast into it. And all of them from 1903 and on, all have them cast into them. This machine was made in 1910 (serial # G340707) and does not have the motor lug cast into it. Can anyone help answer that?
Thanks.
~G~
[ATTACH=CONFIG]386609[/ATTACH]
It fits in the opening, the hinges line up and it clears the drawer and sides but I think that the feet cast into the bottom of the machine prevent it from going all of the way down into the cabinet opening, thus preventing the top from closing. HOWEVER, if the motor was removed (not needed) and the block of wood that is screwed to the inside of the lid were to be removed, it WILL FIT and close properly.
As to the poor old 66, the old gal has seen better days and the cabinet is worthy of a nicer machine. The bed has been repainted, decals are mostly gone as is the Singer name. The chrome is bad on the entire machine. Including the faceplate, back plate, and footplate. The slide is missing too. I think she might be a parts machine or a repaint project.
[ATTACH=CONFIG]386611[/ATTACH]
I do have a question about the 66 head though. I read that the Singer machines made before 1901 did not have the motor lug cast into it. And all of them from 1903 and on, all have them cast into them. This machine was made in 1910 (serial # G340707) and does not have the motor lug cast into it. Can anyone help answer that?
Thanks.
~G~
Nancy
Well here is my Jones "treadle!" I swear we had a long conversation before Christmas about this "treadle" cabinet with a pristine Jones sewing machine! Well, as you can see the[ATTACH=CONFIG]386858[/ATTACH] person who had this machine has no idea what a treadle is! Meet the twin to my first HC Jones machine![ATTACH=CONFIG]386859[/ATTACH] I am actually glad the Jones turned out to be another HC and not a treadle! I don't have room for another treadle! Oh and Muv, my bad! I still haven't fixed the tension on the first machine, which is pretty obvious with them side by side!
Nancy
Nancy
Last edited by BoJangles; 01-08-2013 at 05:09 PM.
Banned
Join Date: Oct 2012
Location: San Lorenzo, CA
Posts: 5,361
Wow.....just wow....... (turning green)
Nancy, I never heard of a Jones machine until I read about them on this board. Your machines are just BEAUTIFUL! Their decals are fancy dancy. I will certainly buy one if I run across one at a decent price. Thanks for sharing.
Thread
Thread Starter
Forum
Replies
Last Post
Stitchnripper
Main
5
10-17-2018 09:01 AM
AngieS
Main
38
10-06-2011 10:06 PM
craftybear
Offline Events, Announcements, Discussions
34
09-09-2011 12:36 PM