Vintage Sewing Machine Shop.....Come on in and sit a spell
Nancy
Nancy, I was reluctant to get some Tri-flow but now that I have tried it, I can say that it is better than regular oil on stuck or seized parts. I will continue to use Singer Oil for regular stuff but the Tri-Flow is much better for the things you are describing.
~G~
~G~
Power Poster
Join Date: Mar 2011
Location: Somewhere
Posts: 15,506
Nancy, I was reluctant to get some Tri-flow but now that I have tried it, I can say that it is better than regular oil on stuck or seized parts. I will continue to use Singer Oil for regular stuff but the Tri-Flow is much better for the things you are describing.
~G~
~G~
Super Member
Join Date: Jan 2011
Location: Sierra Vista, AZ
Posts: 3,992
Senior Member
Join Date: Mar 2010
Location: Arkansas
Posts: 420
Banned
Join Date: Oct 2012
Location: San Lorenzo, CA
Posts: 5,361
not sure this has been posted before....
http://www.etsy.com/listing/12006778...earch_type=all
http://www.etsy.com/listing/12006778...earch_type=all
so if nailing 2 things is good, nailing 15 is 'gooder'?
Nancy
[QUOTE=Mizkaki;5839156]Nancy,
I doubt that this machine takes the 12x1. I haven't seen this machine in person so I am using an educated guess about the needle . I believe that it should take a DBx1. The 16X1 needle is the same length as the DBx1, 16x231 and 15x1. BTW did you orient the needle so that the long groove is to the left and thread it left to right? The needles that I gave you are round shank and the orientation must be done with care. If you did orient it correctly and it still doesn't pick up the bobbin thread, try scooting the needle down a tiny bit.
If all else fails, I will be home on Friday and will be glad to find you the correct needle.
Cathy
Yipppppeeeeee! My Adler is sewing a perfect stitch! Cathy, I should never never question you! I found an old needle case in the drawers of the Adler cabinet. The needles are 287WH/1738 Nadeln. I googled that size and Schmetz came back that the 287WH/1738 is the same as a 16x231 or DBx1. So I put in one of your 16/231's and of course I had a perfect stitch - I could have gotten a perfect stitch all along, but I had to play with the orientation of the needle. This Adler has a full reverse just like a modern machine! I am still having trouble with the feed dog drop, but that will come.
Cathy, do you have a free motion needle spring you will sell me for this machine? I think, it would be fun to dabble a little in FM with the Adler.
Nancy
I doubt that this machine takes the 12x1. I haven't seen this machine in person so I am using an educated guess about the needle . I believe that it should take a DBx1. The 16X1 needle is the same length as the DBx1, 16x231 and 15x1. BTW did you orient the needle so that the long groove is to the left and thread it left to right? The needles that I gave you are round shank and the orientation must be done with care. If you did orient it correctly and it still doesn't pick up the bobbin thread, try scooting the needle down a tiny bit.
If all else fails, I will be home on Friday and will be glad to find you the correct needle.
Cathy
Yipppppeeeeee! My Adler is sewing a perfect stitch! Cathy, I should never never question you! I found an old needle case in the drawers of the Adler cabinet. The needles are 287WH/1738 Nadeln. I googled that size and Schmetz came back that the 287WH/1738 is the same as a 16x231 or DBx1. So I put in one of your 16/231's and of course I had a perfect stitch - I could have gotten a perfect stitch all along, but I had to play with the orientation of the needle. This Adler has a full reverse just like a modern machine! I am still having trouble with the feed dog drop, but that will come.
Cathy, do you have a free motion needle spring you will sell me for this machine? I think, it would be fun to dabble a little in FM with the Adler.
Nancy
Thread
Thread Starter
Forum
Replies
Last Post
Stitchnripper
Main
5
10-17-2018 09:01 AM
AngieS
Main
38
10-06-2011 10:06 PM
craftybear
Offline Events, Announcements, Discussions
34
09-09-2011 12:36 PM