Help...sewing but not quilting related
#1
I have until Saturday to make slip covers for 2 of these chairs. I have no idea how to start! Can someone point me in the right direction. I'm not sure how I should take the measurements and put it together. I'm hoping someone has made slip covers for things! I don't want them to be too baggy, but I don't want them tight either, kwim? Thank you to whoever can offer some guidance!
#4
#5
Originally Posted by blzzrdqueen
I have until Saturday to make slip covers for 2 of these chairs. I have no idea how to start! Can someone point me in the right direction. I'm not sure how I should take the measurements and put it together. I'm hoping someone has made slip covers for things! I don't want them to be too baggy, but I don't want them tight either, kwim? Thank you to whoever can offer some guidance!
:lol: :lol:
#6
Ok what you do is to lay the fabric wrong sides up onto the chairs. You pin the "seams" Once you have the parts pinned and all on you can mark the seam that will be open and I usually mark all of them. then you unpin the opening seam and take the thing to the machine and sew your seams. once you have your seams sewn you can turn it inside out and you have perfectly fitting slip covers. Watch this video. It will explain it better then I can.
http://www.youtube.com/watch?v=bSG0bEnMgrY
http://www.youtube.com/watch?v=bSG0bEnMgrY
#7
does it need to be 'good enough for family', or ' company'? For family, I'd start with apiece of fabric large enough to cover the area; wrong side out, pin to shape, tucking /folding where needed. take it off your mannequin, sew, turn right side out... for company, I'd go rent something for the time you need them, & store those . Good luck.
#8
Originally Posted by vjengels
does it need to be 'good enough for family', or ' company'? For family, I'd start with apiece of fabric large enough to cover the area; wrong side out, pin to shape, tucking /folding where needed. take it off your mannequin, sew, turn right side out... for company, I'd go rent something for the time you need them, & store those . Good luck.
Thank you l so much for the suggestions! I wasn't expecting such a quick responce!
#9
Power Poster
Join Date: Dec 2008
Location: Western Wisconsin
Posts: 12,930
I would remove as much of the plastic as possible first, so it doesn't create bumps unde the fabric. If you can't remove enough of it, I would probably cover the plastic with batting before starting to cover the chairs.
#10
I have made slipcovers and reupholstered furniture. Those chairs would be easier to reupholster then make covers for them. They are in bad enough shape that it would show through the covers. The covers that are on them are probably stapled in place. Take the staples out, remove the old covering and use them for a guide to make the new covering. It really isn't that hard to do if you take your time and pay attention as you are removing the old covers...Wish I could be there to show you.....
Ditter
Ditter
Thread
Thread Starter
Forum
Replies
Last Post
PghPat
General Chit-Chat (non-quilting talk)
14
04-10-2016 06:00 PM
Roberta
General Chit-Chat (non-quilting talk)
9
06-08-2015 08:19 PM
joysewer
General Chit-Chat (non-quilting talk)
11
10-27-2012 06:18 PM