Vintage Sewing Machine Shop.....Come on in and sit a spell
Super Member
Join Date: Dec 2011
Location: Northern CA near Sacramento
Posts: 1,107
Nancy,
Several models of the Free-Westinghouse VS machines use the 15x1 needles. The rotary machines use the shorter CC needle. Then to completely confuse you i have a 3/4 sized Free-Westinghouse VS from 1920 that uses the longer 20x1 needle.
Cathy
Several models of the Free-Westinghouse VS machines use the 15x1 needles. The rotary machines use the shorter CC needle. Then to completely confuse you i have a 3/4 sized Free-Westinghouse VS from 1920 that uses the longer 20x1 needle.
Cathy
Nancy,
In answer to your question treadles can differ in how they feel, some easy to treadle some harder. Tweaking the pivots in the treadle mechanism can sometimes help . Also the treadle wheel size and placement on the frame will affect the angle the belt comes into the machine, therefore making a difference in whether it rubs the machine casting or not. Clear as mud?
Cathy
In answer to your question treadles can differ in how they feel, some easy to treadle some harder. Tweaking the pivots in the treadle mechanism can sometimes help . Also the treadle wheel size and placement on the frame will affect the angle the belt comes into the machine, therefore making a difference in whether it rubs the machine casting or not. Clear as mud?
Cathy
That also explains why the leather belt started to fray faster when I changed the machine into the regular treadle.
So Nancy, Cathy came to the rescue. Thanks!
Super Member
Join Date: Nov 2010
Location: MS
Posts: 2,624
Save her go now omg...white featherweight!! $40.00
please http://newyork.craigslist.org/lgi/hsh/2853113763.html
I wish I knew someone in that area
please http://newyork.craigslist.org/lgi/hsh/2853113763.html
I wish I knew someone in that area
Member
Join Date: Jan 2012
Posts: 8
A-ha! Thank you, Joe and Cathy! A new bobbin case will be my next purchase then.
I will also try flipping that washer.
Regards,
Carrie
I will also try flipping that washer.
Regards,
Carrie
Nancy
Last edited by BoJangles; 02-17-2012 at 06:30 AM.
Makes sense to me! I doubt I will be tweaking the pivots on the treadles. My husband likes to make the adjustments on the treadles, but he leaves the machines for me to play with.
That also explains why the leather belt started to fray faster when I changed the machine into the regular treadle.
So Nancy, Cathy came to the rescue. Thanks!
That also explains why the leather belt started to fray faster when I changed the machine into the regular treadle.
So Nancy, Cathy came to the rescue. Thanks!
Nancy
Here's an article on on furniture oils:
http://www.worthpoint.com/blog-entry...eid=156b1afb28
Does this mean I have to quit using Howard's Feed n Wax?
http://www.worthpoint.com/blog-entry...eid=156b1afb28
Does this mean I have to quit using Howard's Feed n Wax?
Nancy
Nancy
Have any of you tried using metallic thread on your 401a's or a similar machine? Yesterday, I changed needles (to a metallic needle), re-threaded several times, put the metallic thread on a spool behind the machine so the thread could relax before it hit the thread guides, played with the tension, did everything I could think of to get my new 401a to accept the metallic thread! No go - I spent an hour going 5 inches, cutting the bobbin thread off every 1/2" or so when it jammed, removing the slide plate, cleaning the bobbin area, re-threading the bobbin - everything I could think of! I would sew a 1/2 inch or so then it jammed up - had to cut the bobbin thread off underneath due to a huge mess. I switched to a 50 weight DMC thread and didn't have any issues at all? I really wanted to use metallic thread on a little Patchability I was doing!
Nancy
Nancy
Geeze, Charlee that is an interesting article. Reminds me of what Glenn says about the fact that the wood is dead and doesn't need feeding or something like that. Glenn, I'd like to see your observations on that article. Does that mean I have to quit using Liquid Gold on my cabinets - I love the way they shine when I use it?
Nancy
Nancy
Thread
Thread Starter
Forum
Replies
Last Post
Stitchnripper
Main
5
10-17-2018 09:01 AM
AngieS
Main
38
10-06-2011 10:06 PM
craftybear
Offline Events, Announcements, Discussions
34
09-09-2011 12:36 PM