Vintage Sewing Machine Shop.....Come on in and sit a spell
Super Member
Join Date: Mar 2010
Location: Huntsville, AL
Posts: 2,609
We are back home from a wonderful trip to see Phil and Miriam. We had a great time and looking forward to the next visit. Will post more later.
Skip
Skip
Miriam and Skip, I envy you guys! It is so much fun to work on a hobby with a fellow enthusiast!
Nancy
Nancy
Power Poster
Join Date: Mar 2011
Location: Somewhere
Posts: 15,506
We did have a good time with Glenn and Pat. I have the redeye we started done except for the bobbin area and I need to get another couple dremmel tool bits and finish off the plates. I screwed up the French polishing a bit today after I painted with the wrong color black touch up paint but I worked it out eventually - Glenn you should be proud of me. We had DGKs hanging around. They now would prefer to clean and oil old sewing machines to eating and making mudpies. Mercy sewed a couple dresses for her doll today. I'm very excited. The machine with the spinner knob gave her the confidence she needed! Wilbur loves to work the Chinese hand crank - he thinks it is too noisy - it is - we had to oil it - it still squeaks - cheap Chinese junk....
Power Poster
Join Date: Mar 2011
Location: Somewhere
Posts: 15,506
Super Member
Join Date: Mar 2010
Location: Huntsville, AL
Posts: 2,609
Miriam you mean you did not use the Testors gloss black paint pin??? I know you did a good job and want to see a pic of your touch ups. Yes we did have fun. Oh that Wilbur LOL
Power Poster
Join Date: Mar 2011
Location: Somewhere
Posts: 15,506
I think I got flat black somehow. It does help though.
That Wilbur thought that VS machine with the missing slide plate was REALLY KOOL . He even ate most of his peas so he could oil it.
That Wilbur thought that VS machine with the missing slide plate was REALLY KOOL . He even ate most of his peas so he could oil it.
Super Member
Join Date: Dec 2010
Location: Michigan
Posts: 3,334
It's good to know that bribery still works.
Power Poster
Join Date: Mar 2011
Location: Somewhere
Posts: 15,506
happy birthday glenn
Last edited by miriam; 09-26-2013 at 05:09 AM.
Super Member
Join Date: Feb 2012
Posts: 8,091
Miriam,
Take the gear cover plate off the Chinese HC. Clean it good then grease it with Tri-Flow grease. Oil the shafts with T-F too then USE it. Mine was like you describe, noisy and coarse feeling. But after the grease and oil it is smoothing out and quieting down.
Joe
Take the gear cover plate off the Chinese HC. Clean it good then grease it with Tri-Flow grease. Oil the shafts with T-F too then USE it. Mine was like you describe, noisy and coarse feeling. But after the grease and oil it is smoothing out and quieting down.
Joe
Thread
Thread Starter
Forum
Replies
Last Post
Stitchnripper
Main
5
10-17-2018 09:01 AM
AngieS
Main
38
10-06-2011 10:06 PM
craftybear
Offline Events, Announcements, Discussions
34
09-09-2011 12:36 PM