Plastic lined adult shirt savers/bibs
#11
Super Member
Join Date: Sep 2011
Posts: 2,720
I have seen where some ask that they not look like bibs but rather a fun shirt.
You can take a real shirt, sew the front button area closed. Then cut off the shirt from the shoulders down around the sleeves. The collar is split in the back and that is where the fastener goes. Line them from the neck down with terry cloth, etc.
You can take a real shirt, sew the front button area closed. Then cut off the shirt from the shoulders down around the sleeves. The collar is split in the back and that is where the fastener goes. Line them from the neck down with terry cloth, etc.
This pdf says to use PUL or rip stop nylon for your waterproof backing, http://fishsticksdesigns.com/blog/wp...BibPattern.pdf
Last edited by ibex94; 08-17-2016 at 06:06 PM.
#12
Super Member
Join Date: Aug 2011
Location: kansas
Posts: 6,407
A friend showed a version that looked like a wide scarf that draped over the neck and then Velcro together in the front so that it protected the front of the shirt. Looked really nice and would be easy to put on/off and not really look like a bib!
#13
Super Member
Join Date: Jul 2012
Location: Vancouver Island, Beautiful BC
Posts: 2,090
My daughter used to be a Candy Striper at a local Long Term Care facility. There they called the adult bibs, Dinner Jackets and they were nicely designed, some for women, some for men and some basic ones.
I never handled them, but they were not bulky and did have a nice faux front with buttons.
How many are you making and will they be washed in an industrial or home laundry? My first thought was PUL or Babyville tm diaper cover fabric. If you have a medical supply house nearby, you could check into waterproof mattress pads. They are designed to go through high heat laundry and should hold up.
I never handled them, but they were not bulky and did have a nice faux front with buttons.
How many are you making and will they be washed in an industrial or home laundry? My first thought was PUL or Babyville tm diaper cover fabric. If you have a medical supply house nearby, you could check into waterproof mattress pads. They are designed to go through high heat laundry and should hold up.
#14
Super Member
Join Date: Aug 2014
Location: Idaho
Posts: 1,290
I have seen where some ask that they not look like bibs but rather a fun shirt.
You can take a real shirt, sew the front button area closed. Then cut off the shirt from the shoulders down around the sleeves. The collar is split in the back and that is where the fastener goes. Line them from the neck down with terry cloth, etc.
Just something to try and maintain some dignity . You can google the images and get some other ideas and directions.
You can take a real shirt, sew the front button area closed. Then cut off the shirt from the shoulders down around the sleeves. The collar is split in the back and that is where the fastener goes. Line them from the neck down with terry cloth, etc.
Just something to try and maintain some dignity . You can google the images and get some other ideas and directions.
#16
Junior Member
Thread Starter
Join Date: Jan 2010
Location: NW Washington
Posts: 257
I was looking at Pinterest and saw some real nice ideas that look like vests for the guys and collars and lace for gals...lots of cute ideas out there. In my area anything with Seahawks is a winner!
Thanks so much for all the ideas . I personally think the towel or quilted ones work best
Thanks so much for all the ideas . I personally think the towel or quilted ones work best
#18
Power Poster
Join Date: May 2008
Location: MN
Posts: 24,646
I think I would use terry cloth or heavyweight flannel instead of plastic. Or maybe microfiber fabric? That is very absorbent.
I think plastic/vinyl wipes off - but not so sure about going through a washer and dryer.
I think plastic/vinyl wipes off - but not so sure about going through a washer and dryer.
#19
Super Member
Join Date: Dec 2012
Posts: 1,857
You can use a very thin vinyl. I use it in baby bibs and beach totes, But, I made bibs for my mother and didn't use a plastic. I used a cotton on the front and a flannel for the backing. I used flannel because she wore polyester shirts and the flannel would stay and not slide down. I also did not use any sort of closure. I made 2 long 'flaps' that went over the shoulders and down about 7". This proved fine for holding on and didn't require someone to hook or snap anything. I found that her spills did not soak thru the bib and it was easier to launder and to roll up to carry in her purse. I used some dark blue prints and some dark brown prints and cut the bottom of the front in a v shape so that it didn't really look like a bib when she was out at a restaurant. She lived in a senior complex and it was amazing how many ladies asked for one!
#20
Super Member
Join Date: Nov 2009
Posts: 2,061
There is a pattern on the internet for a no-sew apron made from a t-shirt. It uses some artful cutting and makes a cover up that looks and functions like an apron. It gives the impression that the person is "working" rather than that they need a bib. They are absorbent, easily washable, have no buttons or closures to worry about and look nice. Used t-shirts from the thrift store work wonderfully and if you buy them on "bag day" they are cheap to make. I think men would like the dark colored ones or maybe with "manly" designs such as motorcycles or cars on the front.
Thread
Thread Starter
Forum
Replies
Last Post
Julie in NM
General Chit-Chat (non-quilting talk)
10
09-24-2011 09:42 AM
Selena
General Chit-Chat (non-quilting talk)
59
09-17-2011 04:47 PM