What iron do you use when sewing?
#21
Super Member
Join Date: Jul 2010
Location: Central Willamette Valley, Oregon, USA
Posts: 7,695
I use the same ones, but I found a silicone iron shaped pad that I just put the cooling iron on face down, and now it doesn't get knocked over any more.
#25
I also use a cheap one from Walmart..and it does the trick and as the others mentioned , "no quilt tossing it and getting a new one when it dies"
Also use the little Clover teeny-tiny one for paper piecing and what a charmer!
Also use the little Clover teeny-tiny one for paper piecing and what a charmer!
#26
Senior Member
Thread Starter
Join Date: Jan 2011
Location: Pine Grove, PA
Posts: 466
THANKS everyone for your insights on ironing!! I believe I'm off to find a cheapie! & use the rest of my savings
FOR FABRIC!
FOR FABRIC!
#27
Junior Member
Join Date: Jan 2011
Location: Cadiz, KY
Posts: 196
I bought a T-Fal with a ceramic plate. It does not overheat my piecing. Am now looking to perfect this idea by buying a wooden ironing board. Was told that you don't know the difference that no steam and a wooden board can make til you try it. So thinking I'll try it. I love my iron!! Got it at KMart. Only place I've ever seen one. It cost about $50.
#28
Super Member
Join Date: Jun 2010
Location: The Deep South near Cajun Country, USA
Posts: 5,434
I love that little Rowenta iron. It's perfect to sit on my small ironing surface when I am doing paper piecing. I don't like the fact that it doesn't have an on/off switch. I've solve that by plugging it into a multi-plug with an on/off switch. It gets hot super fast and is small enough to use on an 12 x 18 surface. If I am ironing big things I go back to one of my big irons. For those, the cheaper the better, as long as it gets hot. The one I'm using now cost less than $10 at WM about 10 years ago.
Edited to add: If I am piecing or ironing 100% cotton, I always use the hottest setting. I am careful not to leave the iron on the fabric and to only use 100% cotton thread. I gave up putting water in any of my irons a long time ago due to several over the years spitting out blackish, rusty looking stuff that couldn't be removed from the fabric it spit on.
Happy Quilting!
Edited to add: If I am piecing or ironing 100% cotton, I always use the hottest setting. I am careful not to leave the iron on the fabric and to only use 100% cotton thread. I gave up putting water in any of my irons a long time ago due to several over the years spitting out blackish, rusty looking stuff that couldn't be removed from the fabric it spit on.
Happy Quilting!
Last edited by Barb in Louisiana; 10-01-2014 at 06:11 AM.
#29
Senior Member
Join Date: Oct 2011
Location: Jacksonville, FL
Posts: 374
I too use the cheapies. If they start to give me trouble they go into the recycle bin. A good place to look for cheapies is in thrift and consignment shops. Asking to check if they leak/sputter/don't heat is not atrocious and the really good thrift/consignments will help you do it.
Oh, and the Rowenta I bought, it wound up in the trash. The customer service rep told me about the "made in China" issue and then confided that the "real" Rowentas were made in Germany. Problem of leaking irons was known but Rowenta made no effort to fix it. And we should buy what from a company with that attitude? Yikes.
Anyway, enjoy today.
Pat
Oh, and the Rowenta I bought, it wound up in the trash. The customer service rep told me about the "made in China" issue and then confided that the "real" Rowentas were made in Germany. Problem of leaking irons was known but Rowenta made no effort to fix it. And we should buy what from a company with that attitude? Yikes.
Anyway, enjoy today.
Pat
Thread
Thread Starter
Forum
Replies
Last Post
yelto
Main
8
05-28-2010 05:03 PM