big board
#12
I made my own as I got tired of waiting for DH to do it. It measures 2' by 4' and I just set it on my ironing board. Ideally I'd rather have it on top of storage so I don't leave my board up all the time. I love it.
#13
DH made me one. It is 24x48 and sits on the end of my cutting table. My cutting table is 2 of the plastic tables put together on risers. I still have plenty of room for cutting and I love the big board. He made it out of a scrap piece of plywood he had, we covered it with batting and the silver ironing board fabric.
#15
I have one and love it. Mine is 22 x 60 Perfect for ironing a width of fabric and the length is great for working on borders. When a group of us get together we put bed risers under the legs of one table, put a big board on top and share.
#16
Super Member
Join Date: Jul 2012
Location: Morris Plains, NJ
Posts: 1,803
The secret is to start with a sturdy, solid ironing table. I have two boards, one of which has those annoying T legs and is definitely not sturdy enough. My other board is built better and can handle the weight. Also - don't use super dense, heavy wood, like 1" thick chipboard and 2x4s for the lip. Have him build it out of lighter weight materials.
#17
Senior Member
Join Date: May 2012
Location: Traverse City, MI
Posts: 405
My husband made me one to fit on a ironing board. I love it but is heavy and bent the ironing board so bought a used one at the thrift store but it is starting to bend. Since I've had it several years, I'll look for another used one. I took it off for awhile but missed it. I do have a 2nd one for ironing clothes (which I rarely do).
#18
I made a big ironing board from a leftover piece of plywood (22" x 65") and put it on top of a 30" high Home Depot 3 shelf wire 'storage unit' (about 20 bucks). I secured the wood underneath with some screws that had wide plastic washers on them (that I saved from some other purchase but you could always get a pack of screws and wide washers). The washers fit over 2 of the wires underneath the top shelf and screw into the bottom-side of the wood. Now I have 2 shelves of space under the board to hold containers with buttons, scissors, tape measure, all that stuff plus a large surface to iron on. I used batting and felt for padding under fabric with elastic around the edges, works really well.
#19
Junior Member
Join Date: Feb 2011
Location: Lititz, PA
Posts: 186
I bought a used big board from a friend. You use it on top of your existing ironing board. The BB ha rubber stops on the under side that you snug up against the top of your existing board. I don't find it the least bit unstable or wobbly.
#20
Super Member
Join Date: Jan 2008
Location: Barnesville GA
Posts: 3,181
I made my own big board with a precut piece of plywood from Home Depot and a few pieces of 1x2 and some screws. Nothing fancy and my ironing board is from a thrift store. Its a little wider than a normal one but I haven't had any problems.
Thread
Thread Starter
Forum
Replies
Last Post
craftybear
Links and Resources
15
04-07-2013 02:59 AM
CorgiNole
Main
13
03-08-2011 06:42 PM