Binding width
#12
Originally Posted by ShellyQ
Straight cut binding is cut on the straight grain instead of the bias, has less give than bias :)
#13
Probably, just look for grain in fabric, I've not worked with denim before but you might want to allow yourself alittle more than 2 1/8 width Because of the thickness of it. Also 5/16 is more than 1/4. Did you mean 3/16? I think that what the other ladies suggested, 2 1/2 would prob be about right. All the best with it and keep us posted :)
#15
Originally Posted by ShellyQ
Probably, just look for grain in fabric, I've not worked with denim before but you might want to allow yourself alittle more than 2 1/8 width Because of the thickness of it. Also 5/16 is more than 1/4. Did you mean 3/16? I think that what the other ladies suggested, 2 1/2 would prob be about right. All the best with it and keep us posted :)
Does anyone have any suggestions on measuring and cutting strips (without a rotary cutter) that aren't wider or shorter on one end? The first time around, when I made the strips for the binding I just took my yard stick (it was wide as the strips I needed to make) and traced that onto the fabric. But I don't have anything that's 2-3 inches wide to trace onto the fabric and I can't draw two paralell lines "freehand" on fabric to save my life (this is coming from someone who always got A's in art classes. lol)
#16
I just took my yard stick (it was wide as the strips I needed to make) and traced that onto the fabric. But I don't have anything that's 2-3 inches wide to trace onto the fabric
Hope that makes sense!
sue
#19
...I could try that and see if that works.
Just curious, but is there some special way to sew the binding to the edges? I was reading a post a while back (I forget who posted it) where she first sewed it to the back and then flipped it to the front and sewed it again...eh, something like that. I thought you just pin the binding to the edge, stitch it on, and you're done...or can you do that?
Just curious, but is there some special way to sew the binding to the edges? I was reading a post a while back (I forget who posted it) where she first sewed it to the back and then flipped it to the front and sewed it again...eh, something like that. I thought you just pin the binding to the edge, stitch it on, and you're done...or can you do that?
#20
Usually I fold my binding in half,right sides out, then line up the raw edges, binding on the front & stitch it on. Then I flip it over to the back & hand stitch it down.
BUT, I saw this on the board this morning:
That sounds like it might work well for your denim!
sue
BUT, I saw this on the board this morning:
Ordinarily, I attach my binding to the right side of the project, turn the edge to the back side, pin under the seam allowance, and then hand stitch. But on this project, I wanted to machine stitch from the top (using my new red/white/blue varigated thread) and catch the seam allowance with a decorative stitch. In doing this in the past, there always seemed to be places where the seam allowance poked out and didn't stay where I had pinned regardless of how many pins I used. Then I had to rip and restitch.
Somehow, recently, I stitched my binding to the back side by mistake. I scolded myself for my dumb error. Rather than rip, I decided to reverse my practice, pin on the right side and continue with my decorative stitch from the right side. It turned out great!!! No more poking, ripping, restitching.
Needless to say, I will continue to do my machine-stitched binding in my newly found manner.
Suzanne
Somehow, recently, I stitched my binding to the back side by mistake. I scolded myself for my dumb error. Rather than rip, I decided to reverse my practice, pin on the right side and continue with my decorative stitch from the right side. It turned out great!!! No more poking, ripping, restitching.
Needless to say, I will continue to do my machine-stitched binding in my newly found manner.
Suzanne
sue
Thread
Thread Starter
Forum
Replies
Last Post
craftybear
Links and Resources
3
12-25-2010 09:49 PM
craftybear
Links and Resources
0
06-08-2010 08:55 PM
Rachelcb80
Main
48
05-26-2010 12:51 PM