virtualbernie

Start using it! Great tool! They even have a bigger one now that cuts in 2 1/2 wide increments up to 20 inches wide!

Joyce

Now I have 2 things on my list for my next JoAnn coupons.
I need the larger Shape Cutter. Simplicity rulers have a hinged 2 1/2" bias ruler for binding. It's cool.

bearisgray

How does the shape cutter work for cutting/trimming itty-bitty pieces?

Like when there is only enough fabric left over to cut/make one square? (Making squares of small scraps)

Is it more practical/easier to use than a template?

nwm50

Rhonda rock on getting you templates! She sent me some small ones too....lifesaver!

nwm50

unless you have an acqququilt Go! ??? They have an die that cuts these sizes.

Jingle

To cut scraps into 2" or any other size, the only accurate way would be to cut each one. As far as I know, otherwise the strips across the width of fabric, then cut to the size square you need would be the way to do it. Cut the strips as wide as you need the squares to be. I'm going to be cutting some tomorrow, starting another quilt.

quilt crazee

june taylor's ruler-I have 2 sizes-smaller one says "fringe CUT"-you can cut strips on it --then cut your sqs. it has slots every 1/2" up to 12". I use this ruler alot!USE IT W/rotary cutter

nana2

It is also helpful to have one of those large blade rotary cutters which will cut thru several layers of fabric. Stack three different fabrics (45" folded in half makes 6 layers of fabric) cut the strips the width you need for the squares. Disturbing this stack as little as possible, now cut the same measurment as the strip width -- you now have 6 squares, one cut. Another thing which I have learned, is to be VERY consistent in the placement of the ruler. Watch to see if you are laying the measurment line exactly on top of the cut edge of the fabric or if you have just snugged that line up to the cut edge. This is only a thread difference, but does make just a tad difference. Also using the same ruler seems to make a difference. Also notice how the ruler is lining up on the long edge of the strip. Hope this helps.

bearisgray

What she said about lining up the rulers - IMPORTANT AND HELPUL!

Also - check your old(er) well-used rulers to make sure that they still have a straight edge. I was so puzzled when I moved the ruler and I had a bow/curve on the cut edge when I knew I hadn't moved the fabric.

I just tossed three Quilter's Rule rulers (they were big ones, too) in the trash because they are no longer accurate. (By the way, that really did cause me pain to do so. But the curved cuts hurts more)

MarySews

If you are fussy cutting and want a 'dog' in each square, there is an easier way.
Cut the fabric after a repeat which might mean you must cut 10 or 12 inch pieces. Pile them up so they line up perfectly (stick a pin in 'the dog's eye, in each layer'). then you can fussy-cut the layers and all will have the same 'dog' in each square.