Did I quilt enough?
#32
I agree with nativetexan. This will frame each block and give it a little more stability in case of washing. BTW, it is adorable! Good job.
#35
Your quilt is precious. If you know that you have quilted at least 2-4 inches apart, then it's fine. From what I can tell, quilting magazines promote quilting all over the quilt, but that has not always been the way it's been done. I do not like to see quilting overdone, it distracts from the fabric and the pattern. I have seen quilts that I actually can't tell the pattern because they have been quilted so heavily. None of my vintage quilts have this done on them. It is your choice what you want to do, but if you follow the batting directions, you will be fine.
#38
Senior Member
Thread Starter
Join Date: Nov 2012
Posts: 338
You have a fabulous quilt for a newbie!
Yes, when you go around an applique, that's echo quilting. You can echo as many times as you want.
If you're pretty sure about the batting info (2 to 4) then I would make the assumption that 4" would make the quilt secure enough. Again, this means that you need to have a line of quilting no more than 4" apart in any direction. So take a tape measure and measure from your echo quilting to the sitd around the squares. If it's 4" or less, then that area is OK.
but it has to be 4" in ALL directions, so from the cup handle to the edge of the block might be ok (horizontal) but if you measure vertically, next to the cup, you have 10" or so with no quilting, which is not. So you need something across this area to secure it.
I would make a paper mock up of a block. Sketch the cup and steam echo stitching. Use a sharpie for this, then doodle a bit with a pencil and measure to see what the unstitched areas are. Erase and try a different idea. Your additional lines are good, and I would also try connecting the mid point of each side and connect them. that will give you a diamond, then maybe echo this.
I would do a heart inside the cups.
Yes, when you go around an applique, that's echo quilting. You can echo as many times as you want.
If you're pretty sure about the batting info (2 to 4) then I would make the assumption that 4" would make the quilt secure enough. Again, this means that you need to have a line of quilting no more than 4" apart in any direction. So take a tape measure and measure from your echo quilting to the sitd around the squares. If it's 4" or less, then that area is OK.
but it has to be 4" in ALL directions, so from the cup handle to the edge of the block might be ok (horizontal) but if you measure vertically, next to the cup, you have 10" or so with no quilting, which is not. So you need something across this area to secure it.
I would make a paper mock up of a block. Sketch the cup and steam echo stitching. Use a sharpie for this, then doodle a bit with a pencil and measure to see what the unstitched areas are. Erase and try a different idea. Your additional lines are good, and I would also try connecting the mid point of each side and connect them. that will give you a diamond, then maybe echo this.
I would do a heart inside the cups.
Thank you to everyone for helping me learn how to quilt. I guess if you have to ask, "have I quilted enough?" you probably haven't.
Thread
Thread Starter
Forum
Replies
Last Post
greywuuf
For Vintage & Antique Machine Enthusiasts
16
05-09-2012 04:42 PM