Does this method of preparing binding help avoid puckers???
#31
I am going to try this. Sounds like a good idea. I don't seem to have problems with binding, but this seems like it would ensure no problems. Thanks for sharing!
#36
I haven't had a problem with puckering either. Don't own a walking foot, but may get one for future use. I fold and press, then sew slowly to ensure everything lines up as I go. I have only bound straight sides, but I do use the cross grain as it has a bit of give.
#37
Member
Join Date: Jul 2012
Location: Newfield,NY
Posts: 17
Several years ago I ran across this Connecting Threads tutorial on Crossgrain Binding. Crossgrain, meaning you cut straight strips on the width of the fabric.
http://www.connectingthreads.com/tut...ideo__D43.html
I have been using this method without a walking foot, zigzagging or starching. The only place I pin is when I have stitched down to a corner and then, I pin it to hold the fold while I reposition the needle. It works for me. I try not to pull/stretch the loose binding as I am sewing down the edge. Guess I should add that I try to carefully fold the binding fabric (almost always 2.5") when I am pressing it in half. Like others have said, practice on small samples (like mug rugs or potholders) until you find a method that works for you, then... perfect it. Happy Quilting.
Forgot to mention, I sew my binding on one side, turn it by pressing and then hand stitch the back side. I admire those who can sew both sides and come out with straight stitching... my bindings don't look as good if I stitch the second side. Just a quirk for this quilter, I guess!
http://www.connectingthreads.com/tut...ideo__D43.html
I have been using this method without a walking foot, zigzagging or starching. The only place I pin is when I have stitched down to a corner and then, I pin it to hold the fold while I reposition the needle. It works for me. I try not to pull/stretch the loose binding as I am sewing down the edge. Guess I should add that I try to carefully fold the binding fabric (almost always 2.5") when I am pressing it in half. Like others have said, practice on small samples (like mug rugs or potholders) until you find a method that works for you, then... perfect it. Happy Quilting.
Forgot to mention, I sew my binding on one side, turn it by pressing and then hand stitch the back side. I admire those who can sew both sides and come out with straight stitching... my bindings don't look as good if I stitch the second side. Just a quirk for this quilter, I guess!
#39
zig zagging quilt for binding
I think that this is refering to serge the quilt. I do run a stitch around my quilt before adding the binding because it helps hold everything together and keeps puckers and pleats out of the quilt while putting the binding on the quilt.
I read in the tutorial on the web address listed below, that after you fold your binding strip in half, that you can zig-zag the raw edges together before attaching the binding to the quilt. By doing this method, you avoid puckers and pleats in your binding . Has anyone tried this method? copycat
http://www.redpepperquilts.com/2009/...-tutorial.html
http://www.redpepperquilts.com/2009/...-tutorial.html
Thread
Thread Starter
Forum
Replies
Last Post