Does setting your seams with an iron after sewing really make a difference?
#31
I always set my seams and it makes a huge difference. The only disadvantage to setting is if you have to remove stitching; it's harder with sunken threads. I always set my seams using a steam setting and no starch (I never use starch). The precision it adds is SO worth the bit of extra effort.
#34
Super Member
Join Date: May 2011
Location: Folsom, CA
Posts: 1,548
Again, I learn so much here. I didn't know the term setting the seam - now having read all responses I think I have it. So , I should set the seams as I piece, then press the block when complete. The other question is which is better pressing to the side or open? I only pressed open on OBW quilts. So much to learn.
Setting seams is not the same as pressing them and can only be done with a hot iron. It's when you press the iron down flat on the seam just as it was sewn, before you press it open or to one side. It gets rid of any little puckers and sinks the seam threads down into the fabric, making for much more accuracy and a clean, sharp seam line.
I always set my seams and it makes a huge difference. The only disadvantage to setting is if you have to remove stitching; it's harder with sunken threads. I always set my seams using a steam setting and no starch (I never use starch). The precision it adds is SO worth the bit of extra effort.
I always set my seams and it makes a huge difference. The only disadvantage to setting is if you have to remove stitching; it's harder with sunken threads. I always set my seams using a steam setting and no starch (I never use starch). The precision it adds is SO worth the bit of extra effort.
#37
Power Poster
Join Date: May 2008
Location: MN
Posts: 24,654
Setting seams is not the same as pressing them and can only be done with a hot iron. It's when you press the iron down flat on the seam just as it was sewn, before you press it open or to one side. It gets rid of any little puckers and sinks the seam threads down into the fabric, making for much more accuracy and a clean, sharp seam line.
I always set my seams and it makes a huge difference. The only disadvantage to setting is if you have to remove stitching; it's harder with sunken threads. I always set my seams using a steam setting and no starch (I never use starch). The precision it adds is SO worth the bit of extra effort.
I always set my seams and it makes a huge difference. The only disadvantage to setting is if you have to remove stitching; it's harder with sunken threads. I always set my seams using a steam setting and no starch (I never use starch). The precision it adds is SO worth the bit of extra effort.
When I actually do get around to making things, there are several "extra" steps that I usually take that are so worth it to me. (washing the fabric before cutting it, pressing as I go, I also generally do not use starch - I think the fabric should be able to "stand on its own"- pressing the top and backing "one more time" before sandwiching the item - one last time to check for glitches)
#39
Power Poster
Join Date: May 2008
Location: MN
Posts: 24,654
It's a very simple and easy thing to do - it just takes a few moments extra -
Setting a hot iron (I use steam) on a seam before pressing it open or to one side - is about the simplest explanation I can give - for "setting a seam"
#40
Super Member
Join Date: Apr 2010
Location: Fort White, Fl
Posts: 2,689
Yes, I learned this on this very board. I have sewn most of my life but in quilting I seemed to have trouble all the time matching my seams but since I set them first things are much easier. I think it flattens the thread and cloth together so everything goes together better. I know it is well worth my time to do this.
Thread
Thread Starter
Forum
Replies
Last Post
craftybear
Links and Resources
4
08-01-2011 12:24 PM