Elmers glue with Sharon Schamber's method ...
#11
Super Member
Join Date: Aug 2009
Location: The middle of an IL cornfield
Posts: 7,014
Well ... finished. I will quilt it tomorrow but it looks good. Overall I think it took more time than it would to hand baste because I did sections and had to wait for each section to dry ... but it gave me the chance to do other things while waiting AND *I* wasn't basting!
#12
Ironing it dry when you're basting would really depend on the tables you're using. I use plastic folding tables from Wal-Mart so I suspect ironing on one would probably not be a good thing.
#13
Super Member
Join Date: Aug 2010
Location: Piedmont Virginia in the Foothills of the Blue Ridge Mtns.
Posts: 8,562
I keep reading these post about Elmer's glue and am "this" close to giving it a whirl. But, a couple of questions:
When using the stick, does one completely cover the surface with it?
Or with the liquid?
Is it just a light swipe?
Does it feel stiff when it dries before quilting?
Does the basting spray wash out when the finished quilt is washed? Which one is preferred and why?
Any other tips or pointers for a wary gluer-to-be?
Jan in VA
When using the stick, does one completely cover the surface with it?
Or with the liquid?
Is it just a light swipe?
Does it feel stiff when it dries before quilting?
Does the basting spray wash out when the finished quilt is washed? Which one is preferred and why?
Any other tips or pointers for a wary gluer-to-be?
Jan in VA
#15
Super Member
Thread Starter
Join Date: Jan 2011
Location: Knot Merrill, Southern Indiana
Posts: 5,781
Jan - this was my first time using Elmers. I've also used 505 once.
I keep reading these post about Elmer's glue and am "this" close to giving it a whirl. But, a couple of questions:
When using the stick, does one completely cover the surface with it?
Haven't tried the stick - only the liquid.
Or with the liquid?
Is it just a light swipe?
I just drizzle it on. As light as possible. I had a few blobs ... will let you know how those areas quilt. When I drizzled it I did a kind of meandering motion - about 3-5" apart. I actually 'dragged' the glue tip across the quilt to get it as thin as possible, in a fairly fast motion. If I missed a spot, I returned - better than getting too many gobs on it. Because I also used the boards (Sharon Schamber method) I first put my backing down and unrolled it making sure it was straight, then I glued the backing and laid the batting on it, then I drizzled glue on the batting. Yes, the glue tip gummed up a little when against the batting but the way I had the backing/top laid out on boards it was still easier than putting the glue on the reverse side of the quilt top and then flipping it over. I just cleaned the glue tip a little more often.
Overall it was a piece of cake ... the worst part was waiting for the glue to dry so I could do another section - but I got some house work done I couldn't use the iron to dry it because A) I didn't want to gum up the bottom of my good iron (as I said - there were a few blobs and they did bleed through the fabric - but it's no big deal), and I was gluing it on my cutting board table. I did take a hair dryer to it for a little bit because I was getting impatient
Does it feel stiff when it dries before quilting?
It doesn't feel any different than when I basted with 505, which is to say just a tad stiffer than when I baste by hand. I will be quilting this tomorrow, but the one I quilted with 505 was a dream to quilt - very easy to handle.
Does the basting spray wash out when the finished quilt is washed? Which one is preferred and why?
They both wash out (liquid glue and 505). So far I like the glue better ... a LOT less mess. My problem with the 505 was the mess. You simply cannot avoid overspray when working with aerosol. If it was a pump - I would love it. But with the aerosol the spray literally flies and "drifts" everywhere in the room, and I mean everywhere! Everything I touched was tacky. My quilt was on the floor (concrete) on a plastic sheet, I held the can about 8-10" from the quilt, and I had an industrial exhaust (intake) fan about 4' in front of the direction I was spraying. Despite this ... everything within a 10' radius of the spray area was tacky from the spray. I loved the results of how the quilt felt and held together but I will never again deal with that mess. I used my husbands shop and he was NOT happy about the mess it left.
Any other tips or pointers for a wary gluer-to-be?
Try it first on a small project that is relatively un-important (ie ... not a gift or an item intended for show). I was also wary of both products.
Jan in VA
When using the stick, does one completely cover the surface with it?
Haven't tried the stick - only the liquid.
Or with the liquid?
Is it just a light swipe?
I just drizzle it on. As light as possible. I had a few blobs ... will let you know how those areas quilt. When I drizzled it I did a kind of meandering motion - about 3-5" apart. I actually 'dragged' the glue tip across the quilt to get it as thin as possible, in a fairly fast motion. If I missed a spot, I returned - better than getting too many gobs on it. Because I also used the boards (Sharon Schamber method) I first put my backing down and unrolled it making sure it was straight, then I glued the backing and laid the batting on it, then I drizzled glue on the batting. Yes, the glue tip gummed up a little when against the batting but the way I had the backing/top laid out on boards it was still easier than putting the glue on the reverse side of the quilt top and then flipping it over. I just cleaned the glue tip a little more often.
Overall it was a piece of cake ... the worst part was waiting for the glue to dry so I could do another section - but I got some house work done I couldn't use the iron to dry it because A) I didn't want to gum up the bottom of my good iron (as I said - there were a few blobs and they did bleed through the fabric - but it's no big deal), and I was gluing it on my cutting board table. I did take a hair dryer to it for a little bit because I was getting impatient
Does it feel stiff when it dries before quilting?
It doesn't feel any different than when I basted with 505, which is to say just a tad stiffer than when I baste by hand. I will be quilting this tomorrow, but the one I quilted with 505 was a dream to quilt - very easy to handle.
Does the basting spray wash out when the finished quilt is washed? Which one is preferred and why?
They both wash out (liquid glue and 505). So far I like the glue better ... a LOT less mess. My problem with the 505 was the mess. You simply cannot avoid overspray when working with aerosol. If it was a pump - I would love it. But with the aerosol the spray literally flies and "drifts" everywhere in the room, and I mean everywhere! Everything I touched was tacky. My quilt was on the floor (concrete) on a plastic sheet, I held the can about 8-10" from the quilt, and I had an industrial exhaust (intake) fan about 4' in front of the direction I was spraying. Despite this ... everything within a 10' radius of the spray area was tacky from the spray. I loved the results of how the quilt felt and held together but I will never again deal with that mess. I used my husbands shop and he was NOT happy about the mess it left.
Any other tips or pointers for a wary gluer-to-be?
Try it first on a small project that is relatively un-important (ie ... not a gift or an item intended for show). I was also wary of both products.
Jan in VA
#16
Super Member
Join Date: Aug 2009
Location: The middle of an IL cornfield
Posts: 7,014
If you are talking about the white ones that fold in the middle ( 3 x 6 ft I think), I iron on them all the time as long as there is batting on the bottom. That's where I do my final iron of tops or backing. No problems so far but my iron is not one of the fancy super hot irons. It, too, is a Walmart cheapie but I use it on the highest setting.
#19
Super Member
Join Date: May 2012
Location: Central Wisconsin
Posts: 4,391
Could someone please post the link to the Sharon Shamber method? The first time I heard about it, it took quite a while before I was able to find the tute on that.
I basted a quilt a few weeks ago with Roxanne's GLUE-BASTE-IT. It's the same as Elmer's School Glue, but the $9 bottle comes with a metal spout to get the glue in a nice thin line. When that bottle is empty, it will be filled with Elmer's.
The thing missing here is to lay out the batt and the backing on top of it, right side up, smooth and flat. Some put a few pins across the middle to hold it in place. Then fold back the top layer about half way and drip, drizzle, or whatever, the glue unto the backing layer. I used a small spot about every 6 inches. Fold the backing down, smooth very well and let it dry. I did this on my bed and used the iron to just press on each glue spot. Then work on the other half the same way.
When that is dry, flip it over, smooth the top onto the batt, pin a few places in the middle and put glue spots, lines, drizzles, etc. unto the back side of the top. Fold back onto the batt, and smooth very well. Use the iron on each spot if you wish. Now fold the other side back and do the same with that side.
I hope this helps.
I basted a quilt a few weeks ago with Roxanne's GLUE-BASTE-IT. It's the same as Elmer's School Glue, but the $9 bottle comes with a metal spout to get the glue in a nice thin line. When that bottle is empty, it will be filled with Elmer's.
The thing missing here is to lay out the batt and the backing on top of it, right side up, smooth and flat. Some put a few pins across the middle to hold it in place. Then fold back the top layer about half way and drip, drizzle, or whatever, the glue unto the backing layer. I used a small spot about every 6 inches. Fold the backing down, smooth very well and let it dry. I did this on my bed and used the iron to just press on each glue spot. Then work on the other half the same way.
When that is dry, flip it over, smooth the top onto the batt, pin a few places in the middle and put glue spots, lines, drizzles, etc. unto the back side of the top. Fold back onto the batt, and smooth very well. Use the iron on each spot if you wish. Now fold the other side back and do the same with that side.
I hope this helps.
Thread
Thread Starter
Forum
Replies
Last Post