The floor is NOT the best place!
#41
Junior Member
Join Date: Sep 2009
Location: Michigan
Posts: 116
I use bulldog clips to secure the layers on the table. I put one about every 10 inches.
Here's a good video to get you started. I've used toothpicks instead of skewers.
http://www.youtube.com/watch?v=jnke_KzeTI8
Here's a good video to get you started. I've used toothpicks instead of skewers.
http://www.youtube.com/watch?v=jnke_KzeTI8
#42
Boy oh boy this is GREAT!!! I never thought to use bulldog clips and the folding cardboard mat or for that matter, fiberboard! Guess I am making a trip to Home Depot and Staples this weekend!!! My knees thank you!!
#43
Super Member
Join Date: Jan 2008
Location: SW Minnesota
Posts: 1,590
I have a Dritz folding table, but it's a little different from those described earlier in this post. Both side drop down when not in use and the center part is only about 6 inches wide, so it's easy to store or wheel to the side of the room. When opened, the legs lock into place and I have a cutting surface (or sandwiching surface) that is approximately 3 feet by 4 feet in size and a little more than 36 inches in height, which is perfect for me since I am vertically challenged. I had purchased my table years ago at JoAnn's Fabrics.
#44
Senior Member
Join Date: Sep 2010
Location: Michigan
Posts: 326
I use a table and fold the top and batting back and smooth out the back and clamp it. Then I pull down the batting over the backing and smooth that out and clamp then place the top on the batting and clamp and pin away. Maybe some of the others above explained it better.
#45
Power Poster
Join Date: Feb 2011
Location: Lowell, MA
Posts: 14,083
Kudos to those of you who can still get up/move around the floor - if it was me - I'd need a tow truck or the paramedics to get me up again. LOL. Unless I can get to my church and use their large dining tables, I would put the extra leaves into my dining room table, then spread the backing fabric (middle third), tape it with masking tape or painter's tape, then do the same with the batting and the quilt. After pinning that section, I would remove the masking tape, roll up the quilt to the next third of the quilt and begin again. I hope this is somewhat clear. Before we had to move I had a gigantic old dining room table, which was nearly as large as the dining tables at church, so it worked great. I've also taped the first part of the quilt, as much as I could get on the table, then after pinning, I would roll it, then begin the process again. Sandwiching a quilt is my least favorite thing about quilting, but if I want to quilt, it's a small price to pay. You could also call a friend and the two of you would have it pin basted in no time. Good luck.
#46
Super Member
Join Date: Aug 2010
Location: Central Iowa
Posts: 2,348
I was shown at a class that you basicly have half of the quilt sandwich hanging over the edge of a table or counter whatever you are using and pin from the center just like always the weight hanging down keeps it smooth no puckers hey it beats the floor and it is pretty simple
#47
If you think you'll do this often (3-4x a year) it might be worth considering the purchase of a folding office table like these. They come in handy for SO many things. I use a self-designed 40" x 72" table to baste my quilts. I clamp the backing down first; lay the batting over that, remove each clamp individually and reclamp over the batting and backing, keeping both layers smooth and gently taut. Lay the top over that, again reclamp each one individually, smoothing as I go. If any hangs over the edge, that's fine. I baste (by pin, by thread, or with glue) in the area that is clamped; move the quilt to accommodate the undone area, reclamp, and baste again.
http://www.officedepot.com/a/product...d-Plastic-Top/
Jan in VA
http://www.officedepot.com/a/product...d-Plastic-Top/
Jan in VA
#48
I'm at the stage of life where I can do them on the floor but not without getting up and down many times to stretch my back and knees. So I did a couple lap quilts on a queen bed with firm mattress, layering and then reaching under the 3 layers to pin them, starting in the middle and working out. Luckily it seems to work fine. Occasionally I would give the quilt a couple stretches or tugs to be sure the bottom layer was not wrinkled. Sure was easier on my back. It was a bed in guest room so I could leave it for a day or 2. Recently still put a larger quilt on the floor.
#49
I saw the suggestion to watch Patsy Thompson's video, but no link. This is how I do it now. The first time, I did it on the floor and I needed to lay down after I did it because my back was done:
http://www.youtube.com/watch?v=2UoUzK19Vww
http://www.youtube.com/watch?v=2UoUzK19Vww
#50
Super Member
Join Date: Jul 2010
Posts: 6,430
I use a sheet of plywood about 30 inches wide and 48" long. I sand the edges. Put it on an ironing board, adjusted to your comfortable height. Put the backing on, clip it to the board. Add the batting and smooth it out, and clip to the board. Add the top, smooth it out, and clip. Work on the center section first and baste however you wish. Move to the left and do the same thing. Move to the right and do the same thing until the entire top is basted. You may be able to do this from a bar stool and your back will love you for it.
Thread
Thread Starter
Forum
Replies
Last Post
carolaug
Links and Resources
5
04-07-2013 03:16 PM
seplnharve
General Chit-Chat (non-quilting talk)
8
05-04-2011 07:07 PM