Go Back  Quiltingboard Forums >
  • Main
  • Help I did something stupid >
  • Help I did something stupid

  • Help I did something stupid

    Thread Tools
     
    Old 09-03-2012, 05:31 AM
      #21  
    Power Poster
     
    Join Date: Mar 2011
    Location: Ontario, Canada
    Posts: 41,533
    Default

    If I am understanding your question.....You have the quilt handiquilted, the backing fabric is now short? I would find a piece of contrasting fabric the same width of the back. I would draw an nice gentle curved scallop edge on the back. I would use whatever method you like to iron the edges over (freezer paper would be my choice) After the edge was all pressed, I would carefully remove the freezer paper and hand appliqué the nice waved edge side to the backing. If needed I would continue the hand quilting over the new backing edge and bind. Relax your little quilt will be saved and you will have added a pretty touch to the back.
    Tartan is offline  
    Old 09-03-2012, 05:55 AM
      #22  
    Super Member
     
    AZ Jane's Avatar
     
    Join Date: Feb 2012
    Location: Phoenix, AZ
    Posts: 2,876
    Default

    OH< OH< OH, the cutest border I've ever done was pieced in blocks. I on;u did the top and bottom with solid down the sides, it was sooooo cute!!!
    AZ Jane is offline  
    Old 09-03-2012, 06:49 AM
      #23  
    Super Member
    Thread Starter
     
    Join Date: Dec 2010
    Location: Georgia
    Posts: 2,048
    Default

    Originally Posted by Tartan
    If I am understanding your question.....You have the quilt handiquilted, the backing fabric is now short?
    You got it exactly, The backing is on, the quilt is quilted and I NEVER should have tried to take a short cut.

    Now I have a side that is too short. can I piece the other side with a strip too so that they will match and bind?
    Vicki W is offline  
    Old 09-03-2012, 07:28 AM
      #24  
    Super Member
     
    roserips's Avatar
     
    Join Date: May 2010
    Location: Pe Ell, Washington
    Posts: 2,512
    Default

    The bias does not tear! However you can tear length of fabric or width of fabric for very accurate results. I always tear my borders. When tearing fabric you check to see that the grain is straight by folding a diagonal if the grain is crooked your triangle is wonky take the short corner and pull on the bias then check again. Once squared you can add as required.
    roserips is offline  
    Old 09-03-2012, 07:29 AM
      #25  
    Super Member
     
    quiltmom04's Avatar
     
    Join Date: Jan 2009
    Location: PA
    Posts: 2,879
    Default

    Originally Posted by Vicki W
    You got it exactly, The backing is on, the quilt is quilted and I NEVER should have tried to take a short cut.

    Now I have a side that is too short. can I piece the other side with a strip too so that they will match and bind?
    I'm with those who are kind of confused. We're you going to bring the fabric around from the back as a finishing edge? Or are you planning to actually add a separate binding? If you just tore off what you were going to wrap around, not a problem - just use a traditional binding. I guess I don't know how you were trying to tear through quilting.
    quiltmom04 is offline  
    Old 09-03-2012, 07:30 AM
      #26  
    Super Member
     
    Join Date: Mar 2007
    Location: Here and there
    Posts: 1,669
    Default

    OK, Vicki W, you didn't do anything stupid. For reasons not readily apparent to me, fabric will not tear straight any more. When I was a kid, we could pull a thread from one side to the other and get a straight line. I don't know what happened, but that doesn't work any more. It doesn't matter what you pay for fabric or whether it comes from LQS orWal Mart, you may not be able to tear it straight.

    Now, get out your rotary cutter, your ruler and your mat and cut the offending fabric into four squares as large as you can get them and between each piece, put some bright and wonderful or some pastel and wonderful pieces--whatever will complement the front--sew it all together and the back will become a design element. And the baby may like it better than the front, just like kids like boxes better than the toys that came in them. froggyintexas
    Originally Posted by Vicki W
    OK, I did something really stupid today.

    I finished handquilting a baby quilt. (Good so far)

    I need to start another one and only had the binding to do. (Good)

    I was going to even it off by tearing it on bias....(only the backing thank God)

    It wasn't straight.

    How can I fix it?
    FroggyinTexas is offline  
    Old 09-03-2012, 07:55 AM
      #27  
    Super Member
     
    Join Date: Nov 2010
    Location: Cadillac, MI
    Posts: 6,487
    Default

    Yes, you can add a matching strip on the other side if you are using contrasting fabric. If you are using matching like I did, then just press the seam and go on with finishing the quilt. Doing both sides will look like an intended design.

    BTW, I've had no trouble tearing fabric as long as I'm a few inches from the edge.

    Last edited by irishrose; 09-03-2012 at 07:58 AM.
    irishrose is offline  
    Old 09-03-2012, 08:36 AM
      #28  
    Senior Member
     
    Join Date: Feb 2012
    Posts: 432
    Default

    any time a fabric isn't square after tearing it to get the straight of grain.1) dampen the fabric with hot/warm water, 2) grasp opposite corners and tug, this straightens the off kelter fabrics. focus on the corners where it isn't the same length.
    3) if this doesn't bring it back to a usable size, then once it is straight, cut it in two pieces and run another contrasting piece down the middle that brings it to a size that is large enough for the top. or put a border around the outside edges. Note the middle piece is easier.
    riutzelj is offline  
    Old 09-03-2012, 08:47 AM
      #29  
    Junior Member
     
    Join Date: Oct 2011
    Location: Madison, Ohio
    Posts: 226
    Default

    Best way to fix it is just to splice it by sewing another piece of fabric to the main body. Yes, it will look odd at first but by the time you get the quilt squared up and the binding on, it will be barely noticeable. "Trust me" - it will be fine. I've had similar dilemmas with my own quilts and have added on the the back in this way and it works out fine.
    brenwalt is offline  
    Old 09-03-2012, 09:02 AM
      #30  
    Senior Member
     
    Join Date: Mar 2011
    Location: Durham, NC
    Posts: 851
    Default

    Now, glass of water, deep breath and say "Thank you" to the beautiful folks on the QB who gave you the ideas to fix this and make it even better. Then "git 'er done" NOW. It's going to be even more beautiful than you planned!
    mhollifiel is offline  
    Related Topics
    Thread
    Thread Starter
    Forum
    Replies
    Last Post
    Tippysmom
    Main
    24
    10-30-2018 12:43 AM
    EmiliasNana
    Pictures
    50
    03-28-2016 09:22 PM
    kentuckyred
    General Chit-Chat (non-quilting talk)
    44
    11-13-2012 11:36 AM
    Renee110
    Main
    60
    01-31-2011 07:52 AM
    Jim's Gem
    General Chit-Chat (non-quilting talk)
    51
    06-06-2010 06:15 PM

    Posting Rules
    You may not post new threads
    You may not post replies
    You may not post attachments
    You may not edit your posts

    BB code is On
    Smilies are On
    [IMG] code is On
    HTML code is On
    Trackbacks are Off
    Pingbacks are Off
    Refbacks are Off



    FREE Quilting Newsletter