Brother Pacesetter PC-8500(D)
#1
Brother Pacesetter PC-8500(D)
Anyone have the 8500?? I just got mine home from the estate sale, but there are a couple of problems. #1 we were unable to find any cards or software to go with it, so I'm going to have to buy those, and we couldn't find any thread to go with it. I can't imagine buying a machine for $3000 and not having those things...perhaps they are still buried among all the other things. If it wasn't going to be used for embroidery I would think a better machine could be purchased for that price and use.
#2 I know NOTHING about the different weights of thread and needles! Does anyone know a good tutorial? I called my local distributor and they would be happy to give me 'lessions' at $75 an hour! I can't afford that at the moment lol
#3 Where to get threads...I looked on eBay and there seems to be a wide selection that all say they work with Brother machines...I guess I need to deal with #2 and #3 will solve it'self lol
#4 Cleaning the machine, again, anyone know of a good tutorial about how to do this? I would much rather do basic maintenence myself if I can.
#2 I know NOTHING about the different weights of thread and needles! Does anyone know a good tutorial? I called my local distributor and they would be happy to give me 'lessions' at $75 an hour! I can't afford that at the moment lol
#3 Where to get threads...I looked on eBay and there seems to be a wide selection that all say they work with Brother machines...I guess I need to deal with #2 and #3 will solve it'self lol
#4 Cleaning the machine, again, anyone know of a good tutorial about how to do this? I would much rather do basic maintenence myself if I can.
#2
Banned
Join Date: Nov 2010
Posts: 4,134
Sometimes I find it hard to sympathize with small business owners.
So short-sighted.
I don't do embroidery but I've found the Superior Threads' thread/needle guides and site info very helpful:
http://www.superiorthreads.com/reference-guides/
Last edited by MTS; 09-20-2012 at 06:35 AM.
#3
Oh my,Embroidery cards are out of date and so hard to find.For the price you payed 3000?I would have shopped around for a trade in.I think you payed to much for your machine.Superiorthreads is a great place but over priced.There is a thread here on the board for machine embroidery,check it out they can answer your questions.Connie in CO
#4
Super Member
Join Date: Mar 2010
Location: Tennessee
Posts: 2,189
Sorry that the estate people thought they had more than they did. Most times they don't sell the 'extras' with the machines. Do you have the hoops?
You can use any type of thread in this machine. For regular sewing you use what ever you have ever used. Of course there will be some threads that 'fuzz' up the machine just like other machines. As far as embroidery any rayon or poly embroidery thread will work. Embroidery thread is usually shiny.... They promote the Brother brand in these machines, but I never found a difference between Sulky, YLI, Maderia, or any of the other brands in my machine (2002D, which is a newer version of the 8500). As far as maintenance, with an embroidery machine you will want to have it serviced at a certified service store. If you mess up the embroidery arm that needs to be re-calibrated. As far as just regular oiling and cleaning---these machines need to only be cleaned out real well. With the drop in bobbin you need to take the feed dog plate off and clean out that area often (between each project and if you think there is a problem). You can put a single drop of oil in one of the holes in the bottom of the plastic bobbin case, but don't over do it. That is all that I have ever done to my machine.
As far as the cards are concerned you will need a card reader with a blank card and a software that will load the designs onto the card from your machine. There are a lot of different software programs to do this. There are 2 types that I know of... the ones that you can digitize pictures/jpegs with and the ones that just take a certain design that resizes and puts it on the card. You need to google/bing to find sites that sell these things. I know there are several online stores that still supply these older machines.
Good luck and happy embroidering!
You can use any type of thread in this machine. For regular sewing you use what ever you have ever used. Of course there will be some threads that 'fuzz' up the machine just like other machines. As far as embroidery any rayon or poly embroidery thread will work. Embroidery thread is usually shiny.... They promote the Brother brand in these machines, but I never found a difference between Sulky, YLI, Maderia, or any of the other brands in my machine (2002D, which is a newer version of the 8500). As far as maintenance, with an embroidery machine you will want to have it serviced at a certified service store. If you mess up the embroidery arm that needs to be re-calibrated. As far as just regular oiling and cleaning---these machines need to only be cleaned out real well. With the drop in bobbin you need to take the feed dog plate off and clean out that area often (between each project and if you think there is a problem). You can put a single drop of oil in one of the holes in the bottom of the plastic bobbin case, but don't over do it. That is all that I have ever done to my machine.
As far as the cards are concerned you will need a card reader with a blank card and a software that will load the designs onto the card from your machine. There are a lot of different software programs to do this. There are 2 types that I know of... the ones that you can digitize pictures/jpegs with and the ones that just take a certain design that resizes and puts it on the card. You need to google/bing to find sites that sell these things. I know there are several online stores that still supply these older machines.
Good luck and happy embroidering!
#5
Have owned and used two different Brother embroidery machines for over 15 years....I have used almost exclusively C&C embroidery thread. There are two different kinds, either Rayon or Polyester, Rayon has more shine, polyester will stand up to bleaching (excellent for baby and childrens clothes and stuff). Sulky makes a nice embroidery thread also, and is nice because it comes on small spools. You will need embroidery needles, I use Schmitz, available at both Joann and Walmart. Now you will need at some point in time software for your computer, but not right away.
How old is your machine, does it have a card slot and let us pray a USB port ?????? if it has a port you are golden and will not need cards. Did you get a dongle ????? Did you get hoops ???? you will need stabilizer, inexpensive and available at Joanns....I would love to help you more just PM me....
How old is your machine, does it have a card slot and let us pray a USB port ?????? if it has a port you are golden and will not need cards. Did you get a dongle ????? Did you get hoops ???? you will need stabilizer, inexpensive and available at Joanns....I would love to help you more just PM me....
#7
Super Member
Join Date: Oct 2010
Location: Tennessee, UC area
Posts: 1,584
I have ULT 2002 (updated to 03), and ULT 2003--but I helped my friend learn her 8500...the biggest difference is the screen. I also have the PE Design software & can digitize. She didn't want that--so I advised her to get the PE Design Basic which sells for about $100 (Walmart, AllBrands). Installed in your computer, you can download from the internet and then write to the blank card--it comes with a reader/writer box. You can resize designs up or down a small amt., see images of the designs.. but it is simple to use. Buying the designs on cards can get expensive and will pay for the 'Basic' shortly. Of course there's Magic Box which writes to a card, and one other I can't remember the name of. Your designs will be .pes format, so you need something compatible. Later when you fall in love with the process, you may want a later machine and more extensive software..but for now, one of these will fit your needs ---and there are free programs on line for changing formats, thread colors, many choices.
#9
There are lots of yahoo groups, the consensus seems to be 75/11 embroidery sharp needles are the most common used excepts for knits where you want an embroidery ball point needle. You tube has a couple tutes but not many. Brothers take pes designs so you should be able to use those and connect to you computer. As for software I'm not sure you need any unless you are altering designs. If you use brother cards you will need a card reader which amazon sells for about 100 and it comes with very basic software. I just got mine and haven't had lessons yet so I'm not of much help
Thread
Thread Starter
Forum
Replies
Last Post