help with slightly wavy borders
#21
Super Member
Join Date: Jun 2010
Location: Chapel Hill
Posts: 1,086
I'll add another viewpoint... if you don't need the extra length and width that the border provides, I would leave it off altogether. The quilt is striking, and I think it would be stunning as a borderless quilt, perhaps with a pieced binding from the various fabrics showcased it in.
Otherwise, I agree, take them off an remeasure.
Cheers, K
Otherwise, I agree, take them off an remeasure.
Cheers, K
#23
I used to get a wave in my borders until I got this tip.
Pin your border to your quilt which is on the bottom, pin every 3 - 4 inches and start to sew from the top, when you have stitched an inch or two, remover the 1st pin you come to and hold the border material and give it a very, very slight pull, stitch, continue to next pin which you remove and carry on all the way down, giving that very slight pull on your border fabric until you get to the bottom inch or so relax and finish the stitching, you will never ever get a wavy border again.
PS I agree with the other ladies for such a pretty quilt I really would suggest you remove the border and try again, a pain I know but it will be worth it for such a pretty quilt.
#25
Member
Join Date: Jul 2010
Posts: 35
Wavey borders
Hi,
I would take the borders off and re measure them. When putting them on do you hold it like when you are putting your binding, with a bit of tension there?
I have just finished my first paying customer quilt and it was a baptisam of fire. All the borders were out of true, I had to square it up but I refused to take the borders off and re do them. Client just told me to quilt it the best I can.
Spray starch has been my lifesaver with this quilt.
Jenny
I would take the borders off and re measure them. When putting them on do you hold it like when you are putting your binding, with a bit of tension there?
I have just finished my first paying customer quilt and it was a baptisam of fire. All the borders were out of true, I had to square it up but I refused to take the borders off and re do them. Client just told me to quilt it the best I can.
Spray starch has been my lifesaver with this quilt.
Jenny
#26
Senior Member
Join Date: Sep 2010
Location: NM
Posts: 993
Did you measure down the middle of the quilt? Then the two sides? Figure out the average size and then cut the borders to that size. Pin the border sides on, may have to scrunch or stretch a little. Sew them. Measure again for the top and bottom, do the same again, scrunch or stretch. Should have a flat quilt. Look it up on the U Tube for pictures. Also, crosswise fabric stretches a little, so if you have the material, cut on the length of the fabric. I like the colors of your quilt.
#28
I guess its all up to each of us to do as we like, but in my opinon I have spent alot of time and money to do the piecing and it only takes a few minutes and steps to assure the boarders are just as nice !!!
There are customers that bring in quilts time and time again that have done a beautiful job on the tops until you get them loaded on the machine and see how bad the boarders are. I refuse to do those customer quilts anymore and leave them for someone else or they wait to get done when I have time to restle with them on the machine because that is just you have to do !!!! You have to stand right there to do alot of manipulating, I always let the customer know and charge them more !! We are LA's not miracle workers.......
There are customers that bring in quilts time and time again that have done a beautiful job on the tops until you get them loaded on the machine and see how bad the boarders are. I refuse to do those customer quilts anymore and leave them for someone else or they wait to get done when I have time to restle with them on the machine because that is just you have to do !!!! You have to stand right there to do alot of manipulating, I always let the customer know and charge them more !! We are LA's not miracle workers.......
#29
Super Member
Join Date: May 2012
Location: Tall Corn State
Posts: 1,231
In defence of the long arm quilter: if you insist on not correcting the wavy borders please do not blame the long arm quilter if you have tucks and still wavy borders when it is returned to you.
There is an old saying - an ounce of protection is worth a pound of cure. Measure thru the middle of the quilt either vertical or horizontal. cut that border fabric to that length X 2. Now divide your quilt into 4th's and the cut borders into 4th's; pin together at the pin sites. When those borders on sewn then do the same measurement to the remaining border. There should be no waves. I hope you try it - it works.
There is an old saying - an ounce of protection is worth a pound of cure. Measure thru the middle of the quilt either vertical or horizontal. cut that border fabric to that length X 2. Now divide your quilt into 4th's and the cut borders into 4th's; pin together at the pin sites. When those borders on sewn then do the same measurement to the remaining border. There should be no waves. I hope you try it - it works.
Thread
Thread Starter
Forum
Replies
Last Post