I need help ? Bailey's Home Quilter pictures
#1
I am having trouble with the tension. It's set to what is recommended. I have tried going up and going down. I've threaded and re-threaded. I have changed bobbins. But it's still pulling up from underneath.
quilt top - threads being pulled up
[ATTACH=CONFIG]137361[/ATTACH]
#3
Originally Posted by Sadiemae
Is your photo a picture of the top or botton?
If it is the top, you probably need to adjust the tension of your bobbin.
If it is the bottom, you probably need to adjust the tension on the top.
If it is the top, you probably need to adjust the tension of your bobbin.
If it is the bottom, you probably need to adjust the tension on the top.
#4
Power Poster
Join Date: Oct 2009
Location: Idaho
Posts: 11,375
I dont' know your machine, but most longarm machines can be adjusted using the bobbin case itself. I loosen or tighten the screw on my bobbin case with a small screwdriver. Only adjust it a tiny bit though at a time.
#5
If you need to adjust bobbin tension, there is a screw on the bobbin case to turn to tighten and loosen.
Hold the bobbin case with thread loaded in case in your hand. Pick up the free thread, the case should stand up in your hand, lift a bit and crawl down a bit. Like a spider on a web. If it flow freely, you need to tighten the screw on the bobbin case. You may have 2 screws on the bobbin case, you will want to turn the larger screw. Also, make sure your bobbin thread is indeed under the spring metal tensioner securely.
Unless you are using a slick thread like rayon or silk, I don't think you tension should be quite so high on the needle.
If you have just unpacked this machine, double check that you don't have any dust or lint lurking about.
If you have the machine on a frame, you may be moving the machine head too fast for the speed of the machine. Also, you may have the quilt too tight on the frame.
Hope this helps, and keep us posted on your progress.
Hold the bobbin case with thread loaded in case in your hand. Pick up the free thread, the case should stand up in your hand, lift a bit and crawl down a bit. Like a spider on a web. If it flow freely, you need to tighten the screw on the bobbin case. You may have 2 screws on the bobbin case, you will want to turn the larger screw. Also, make sure your bobbin thread is indeed under the spring metal tensioner securely.
Unless you are using a slick thread like rayon or silk, I don't think you tension should be quite so high on the needle.
If you have just unpacked this machine, double check that you don't have any dust or lint lurking about.
If you have the machine on a frame, you may be moving the machine head too fast for the speed of the machine. Also, you may have the quilt too tight on the frame.
Hope this helps, and keep us posted on your progress.
#8
Originally Posted by crashnquilt
If you need to adjust bobbin tension, there is a screw on the bobbin case to turn to tighten and loosen.
Hold the bobbin case with thread loaded in case in your hand. Pick up the free thread, the case should stand up in your hand, lift a bit and crawl down a bit. Like a spider on a web. If it flow freely, you need to tighten the screw on the bobbin case. You may have 2 screws on the bobbin case, you will want to turn the larger screw. Also, make sure your bobbin thread is indeed under the spring metal tensioner securely.
Unless you are using a slick thread like rayon or silk, I don't think you tension should be quite so high on the needle.
If you have just unpacked this machine, double check that you don't have any dust or lint lurking about.
If you have the machine on a frame, you may be moving the machine head too fast for the speed of the machine. Also, you may have the quilt too tight on the frame.
Hope this helps, and keep us posted on your progress.
Hold the bobbin case with thread loaded in case in your hand. Pick up the free thread, the case should stand up in your hand, lift a bit and crawl down a bit. Like a spider on a web. If it flow freely, you need to tighten the screw on the bobbin case. You may have 2 screws on the bobbin case, you will want to turn the larger screw. Also, make sure your bobbin thread is indeed under the spring metal tensioner securely.
Unless you are using a slick thread like rayon or silk, I don't think you tension should be quite so high on the needle.
If you have just unpacked this machine, double check that you don't have any dust or lint lurking about.
If you have the machine on a frame, you may be moving the machine head too fast for the speed of the machine. Also, you may have the quilt too tight on the frame.
Hope this helps, and keep us posted on your progress.
Thread
Thread Starter
Forum
Replies
Last Post
kristen0112
Main
6
08-06-2010 10:58 AM