I'm convinced, my machine hates cotton :'(
#22
Yes, if your top is too tight you can have problems. If you reach under and can barely pinch the backing, then it should be good.
Thanks ladies, I will try that King Tut brand thread. Where can you buy it and is it in large quantities? I am also starting my at home quilting business so yes thread breaking slows me up soo much I just don't have time for it. I have a size 90/14 needle, the kind my dealer recommended. Yes my spool is cross rolled so yep it is feeding from my top hook thing haha. Thread path is clear. I loosened my quilt on my frame, maybe its too tight would that cause thread to break? I'm going to try it more loose but I hate the chance of puckers but at the point I will try anything. Thanks so much ofr the advise I am going to try all of it!
#25
Power Poster
Join Date: Dec 2010
Location: Northern California mountains
Posts: 12,538
Not a problem I have with mine. wrong thread? Star or Coats and Clark aren't very good these days, IMHIO. I use Signature or King Tut. Are you 'racing'? Maybe you need to slow down just a tad. How often do you change your needles? a needle that is dull or has a slight burr will mess up even very good thread.
#26
Senior Member
Join Date: Aug 2012
Posts: 421
Do you have the correct size of needle for your thread? If the needle eye is too small for the thread you are using, you will break your thread constantly. If you have PBS in your area, check out Fons and Porter's Love of Quilting series #2100,episode #2106,Fabulous Free Motion with Eric Drexler. He did a great job of explaining about needles. If it is playing in your area, you might want to watch it. It might be helpful.
#27
I had a similar issue with FMQ using my HV Sapphire. Took me almost a year of frustration and hair-pulling, finally realized I actually had an issue with the BOBBIN! The dealer fixed that in about 30 seconds (repair guys are such show offs! LOVE IT!) and I've had no more issues with thread breakage. I do make sure I change my needles regularly and I use a 90 for actual quilting. Recently purchased "super sharp" skinny needles to make my piecing lines straighter, but I wouldn't use that for quilting!
Might be worth having the technician where you purchased the machine look at it. And if any burrs are catching thread, they can fix that and help you prevent more!
Good luck. Don't give up, the chase is worth what you'll catch! SATISFACTION for a job WELL DONE!
Might be worth having the technician where you purchased the machine look at it. And if any burrs are catching thread, they can fix that and help you prevent more!
Good luck. Don't give up, the chase is worth what you'll catch! SATISFACTION for a job WELL DONE!
#28
If your spools are cross threaded they need to be spooling from the top. If it is a straight wound spool (like coats and clark) it would work standing up on a spool holder and unwinding from the side. Maybe that is what you are having trouble with. Look up thread delivery on google and you'll see what I mean. I just learned this recently and it has made a HUGE difference for me...no more broken thread. The size of needle you are using will make a difference too
#29
Super Member
Join Date: Jun 2010
Location: England Alton Towers
Posts: 6,673
I have the same machine and never had the problem. It sounds as if you are not matching thread with needle size. I have the problem you have when hand stitching with a cotton thread and it is usually solved by a larger eye which I hate as the needle is usually larger as well.
#30
Junior Member
Thread Starter
Join Date: Oct 2012
Location: North Dakota
Posts: 258
I have I just checked my bobbin tension and got that set. I also just put in a topstitch 90/14 needle and it will only snap thread when I go right to left passes. I am going to pick up some larger needles like size 18tomorrow. I have used signature thread from superior and it snaps that too going in the right to left passes along the width of my quilt. I check my bobbin carriage for lint as well, that was clean. I hope I get this figured out soon or I will be bald! haha
Thread
Thread Starter
Forum
Replies
Last Post